Trail and Street tyre.The legendary (and patented) all surface performance tyre;now in a size that will be great for the Big Boy wheel users... (2.2" air chamber is especially good for those running without suspension).Now with a new Revised tread (with lowered rails).Utilises two central rails for reduced buzz on hard surfaces, but features drive 'sleepers' between the 'rails' to give traction on loose surfaces (Halo patented). Also features overlapping low profile studs to avoid lateral flex during hard cornering, and so provide positive steering.Multi use pressures allow this one tyre to perform in almost all conditions... both on road and off road.Built-in Puncture Protection System reduces flats.,Directional, universal front or rear tread. ,knurled ground contact points.,High quality skinwall carcass.,Built-in Puncture Protection System,Black.,Black/Skinwall.,Black/Whitewall.,29" x 2.2" (700 x 56C).,Approx Weight: 890g.
26" version of Halo's high quality, general purpose rim.The double wall box section provides huge strength, whilst the relatively low-profile shape provides a degree of vertical compliance comfort. Stainless steel spoke eyelets help ensure an evenly tensioned wheel.An excellent choice for those looking for strength and reliability over weight saving.Ideal for Classic mountain bikes, City, Trekking and Touring.Note: The anodised surface can be used with a rim brake, however the colour will of course wear.Specifications:Material: T-10 heat treated alloy,Drillings: 32H or 36H,Eyelets: Stainless Steel,ERD: 541mm,Colour: Silver or Black anodised,Dimensions: 24mm external width, 18mm internal width..
Sub-4 24" Racing RimLightweight BMX race rims.These low inertia box section alloy rims ensure a quick getaway out of the gate.,Stainless nipple eyelets allow high tension spokes for a stiff wheel that transfers chain drive into forward motion with minimum effort.,Race optimised 30mm wide.,Front or Rear (machined cnc sidewall brake surface) specific versions..Recommended Spoke Tension:Front: 80 to 100Kgs. Rear: 100 to 135Kg.SpecificationsMaterial Box Section 6000 series alloy.,Drillings 32H or 36H,Eyelets Stainless Steel,ERD 495mm,Colour Black,Dimensions 30mm wide.
Lightweight BMX race rims. These low inertia box section alloy rims ensure a quick getaway out of the gate. Stainless nipple eyelets allow high tension spokes for a stiff wheel that transfers chain drive into forward motion with minimum effort.Race optimised 30mm wide. Front or Rear (machined cnc sidewall brake surface) specific versions.20 x 1.7530mm wide.Box Section 6000 series alloy.Pinned joint.CNC brake surface (Rear machined).Black anodised with laser logos.32 or 36H - 415g..
Combat Rear Disc HubBlack anodised Combat looseball hubs. ,CNC machined alloy hub shells.,Standard loose ball ball bearings.,Quick Release axle..SpecificationsDrillings 36H,Bearings Loose Ball,Axle QR,Spacing 135mm,Disc Mount 6 Bolt,Centre to Flange C-L 34mm. C-R 19mm,Dimensions Flange dia 58mm,Colour Black,Weight 450g.
Our Tech Logo Crew Hoodie is functional and versatile.Featuring a pouch pocket with a built in opening for headphones and headphone retaining loops.Key Features:Twin needle stitching detailing,Contrast raglan sleeves,Double fabric hood,Contrast flat lace drawcords,Kangaroo pouch pocket with small opening for ear phone cord feed,Hidden ear phone loops,Ribbed cuffs and hem.
Halo have developed a new family of BMX Racing tyres including these superlight MXR-SLR folding versions.Soft, grippy 55D rubber compound is specced in 20" x 1.60, 1.75 or 1.95 sizes.MXR-SLR tyre is a pure-bred BMX race tyre.Features:Fast rolling 120Tpi casing.,Soft, grippy 55D rubber Compound.,Superlight folding Kevlar bead..Colour: Black Skinwall..Sizes:20 x 1.60 ,20 x 1.75,20 x 1.95.Weights:20 x 1.60: 231g,20 x 1.75: 240g,20 x 1.95: 297g.Recommended inflation: Min 45psi - Max 75psi.
High quality, general purpose 700c rim.The double wall box section provides huge strength, whilst the relatively low-profile shape provides a degree of vertical compliance comfort.Stainless steel spoke eyelets help ensure an evenly tensioned wheel.An excellent choice for those looking for strength and reliability over weight saving.Ideal for City, Gravel, CX, Trekking and Touring.Note: The anodised surface can be used with a rim brake, however the colour will of course wear.SpecificationsMaterial: T-10 heat treated alloy,Drillings: 32H or 36H,Eyelets: Stainless Steel,ERD: 607mm,Colour: Silver or Black anodised,Dimensions: 24mm wide.
All New Trail and Street tyre.Utilises 2 central rails (ridges) for reduced buzz on hard surfaces, but features drive ‘sleepers’ between the ‘rails’ to give traction on loose surfaces (Halo patent pending).Also features overlapping low profile studs to avoid lateral flex during hard cornering, and so give positive steering.Multi use pressures allow this one tyre to perform in almost all conditions both on road and off road.Built-in Puncture Protection System reduces flats.Directional, universal front or rear tread.knurled ground contact points.High quality lightweight carcass.Built-in Puncture Protection SystemBlack sidewall..
Expert level BMX race tyre.Affordable folding tyre with anti puncture (good for race tracks where there may be the chance of punctures).Ideal for all normal racers who just need one tyre to use.Features:55D Rubber Compound.,60 Tpi,Kevlar folding bead.,1mm anti-puncture..Colours:Black Skinwall and option for White Skinwall..Sizes:20 x 1.60,20 x 1.75,20 x 1.95.Weights:20 x 1.60: Black 268g, Whitewall 295g.,20 x 1.75: Black 305g, Whitewall 310g.,20 x 1.95: Black 325g, Whitewall 345g.. Recommended inflation: Min 45psi - Max 75psi.
White Line front hubAlloy J-bend front hub with super smooth sealed bearings and alloy axle.SpecificationsMaterial Alloy shell and axle,Drillings 20H or 24H see below for more information,Bearings 2 Sealed bearings,Axle 9mm QR,Spoke Hole Circle Diameter (PCD) 38mm,OLD 100mm,Colour Black with white decals,Weight 118g.
142mm type conversion kit for 6D Road Disc Rear HubThis simple kit allows the 6D Road Disc rear hub to fit with 12x142mm T-axle type frames.Note: Standard conversation allows regular 130 type road drivetrain to run using the symmetric 2.5mm rotor adaptor (already included with the rear hub). Option to switch to 135 type drivetrain using extra asymmetric +5mm rotor adaptorSpecificationsMaterial Material 7075 CNC machined alloy,Colour Black,Weight 51g.
High quality skewers with internal cam mechanism.Cr-mo chrome plated shaftsAlloy handles with laser etched logosSpecificationsMaterial Cr-mo chrome plated shafts, Alloy handles,Colour Black,Weight Front 50g, Rear 55g, Pair 105g.
Our MT Front Boost Disc Adaptor kit turns your standard MT front hub into a Boost compatible configuration (110mm).The kit consists of: Two extension end cones, A 5mm interlocking disc rotor spacer, Extra-long disc rotor bolts.
Spin Doctor 6D Axle Kit, Rear - M10 Bolt type axle kit for SD6D Hub, Inc. Internal alloy axle
Courier Berlin TyreBerlin has some of the toughest streets on the planet.,Berlin bicycle couriers asked us to provide more puncture protection to their favourite tyre, so we did! The Berlin spec. ,High-density anti-puncture version of Courier tyre has a 2.5mm thick Anti-puncture strip instead of the normal 1mm puncture protection system strip..Available only in Black.700 x 24C - Weight: 415g,700 x 29C - Weight: 475g.
Replacement axles and axle spares for the Halo MT Supadrive hub. The Halo MT hub can be run as a QR 9x135mm set up or 12 x142mm through axle. Utilising heat treated Cro-mo Steel the MT Supadrive axle reduces flex and increases power transfer, and is available in Shimano HG or Sram XD variations (to match your applicable cassette).
Retro QR Skewers, Road type - Cr-Mo shafts, Chromed Steel handles, Alloy endsThe finishing touch to any classically styled road bike.,A pleasing modern tribute to the classic Italian masters of road racing.,Lightweight cut-out Chrome Steel cam handles with Cro-Mo rods and alloy ends.. SpecificationsColour Silver,Weight Front - 64g Rear - 69g Pair - 133g.WARNING: This product is NOT suitable for use with Disc brake bicycles.
Adapter kits to change Halo 6D Road Rear Disc hubs from 130mm OLD to 135mm OLD.Option A. Use to fit a 135mm Disc frame with standard 130mm spaced cranks.(Fits most crankset spacings).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +2.5mm symmetrical adaptor kit. (LH 2.5mm and RH 2.5mm cones). ,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Option B. Use to fit a 135mm Disc frame with 135mm specific spaced cranks.(Use with SRAM road 135mm cranksets with 2.5mm off-set).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +5mm asymmetrical adaptor kit. (LH 1 x 5mm cone, RH use Std cone)*.,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Note: : this option requires the wheel to be re-dished 2.5mm towards the non-drive side to ensure more equalised spoke tensionNote:In some circumstances, if using an MTB specific 10spd cassette in conjunction with a 135mm frame and a 130mm crank set-up (using the 2.5mm symmetric adaptor set) it is possible that you may encounter running difficulties in large sprocket to large chainwheel. This is due to a difference in cassette offset between Shimano MTB and Road 10spd sprockets. Fitting a Road-specific cassette will often solve the issue, or alternatively, switch to the asymmetric +5mm adaptor set and re-dish the wheel.
Combat Disc, Front - Forged and CNC alloy. Standard bearing. QR M9 axle, Front Disc hub with standard loose ball bearingsSpecificationsMaterial : CNC Aluminium,Drillings : 36H,Bearings : Loose Ball Bearings,Axle : QR,Spacing : 100mm,Disc Mount : 6 Bolt,Dimensions : C-L 22mm, C-R 35mm, Flange 58mm,Colour : Black,Weight : 260g.