Our Carbaura RC wheelsets have been designed to keep you one step ahead of the competition.Built around an optimized, Computational Fluid Dynamics tested, aerodynamic profile in a Carbon Fibre chassis, low weights, linear compliance and lateral stiffness were our primary aims with the Carbaura RC wheelsets.The tried and tested 19mm internal and 25mm external rim widths allow you to run a choice of traditional or tubeless tyres and are well suited to tyres ranging from 25c through to 35c widths to deliver enhanced comfort and grip.To improve braking performance and rim durability on tough alpine descents, the braking surface has been finished in a 1.5k weave to dissipate heat throughout the carbon structure faster to dramatically reduce temperature build up.Hand crafted with lightweight bladed aero spokes to decrease resistance and widely spaced hub flanges the Carbaura RC wheelsets have been built to reduce any possible lateral flex and increase power transfer. The rear wheels uses a 16/8e lacing pattern to balance spoke tensions and withstand torque forces from centre of the wheel whilst the front wheel uses radical lacing to reduce weight and drag.Our RS Front and RS 6Drive hubs use fully sealed EZO bearings for year round longevity. The RS 6Drive hub uses 6 individually sprung reversed pawls, mounted into the hub shell, that simultaneously engage into the 30-point freehub driver for positive torque transfer.Available in two depths, 35mm, a lower inertia option great for undulating courses, and 50mm, a more aerodynamic option for flatter routes.Included FittingsFront: 100 x 9mm QR,Rear: 130 x 9mm QR.SpecificationsSpokes: Halo Black Aero Racing Stainless spokes ,Nipples: Halo Red Alloy nipples ,Rim Depth: 30 or 50mm,Internal Width: 19mm,External Width: 25mm,Front Hub Spacing: 100mm,Rear spacing: 130mm,Drillings: 20H Front, 24H Rear,Freehub: Shimano HG and Campagnolo versions,Drive System: 6Drive,Freehub Body: Alloy,Spoke pattern: Radial Front, 16/8e Rear,Recommended Tyre size: 25-35c,Colour: Raw UD/1.5k Carbon.
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.At the core of our Vortex wheels are our all new instantaneous 120 point pick up, MTC Supadrive Boost and MTC Front Boost hubs, with center lock disc mounts, sealed bearings and super wide spaced flanges for increased stiffness and durability.100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.
Our line of Vapour wheels are the lightweight edge.The trail focused Vapour 35 wheels are built with outright speed and reliability in mind.Utilising a wide 30mm internal width rim the Vapour 35 wheels bridge the gap between plus sized wheels and more narrow traditional offerings. With a greater width comes increased tyre volume and stability.In addition to an adept rim, the Vapour 35 wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.Supplied pre-taped the Vapour 35 is tubeless ready from the box.The Vapour 35 wheel set is also available with the option of a MT 6Drive hub, for a quieter 30 click drive.Included FittingsRear Standard: 12mmx142 thru, 9mm x 135 QR,Rear Boost: 12mm x 148 thru.Please note front fittings are not included SpecificationsRims: Sleeve jointed, tubeless-ready, alloy clincher,Spokes: Black double butted stainless spokes,Nipples: Black ED coated brass nipples,Rim Depth: 19mm,Internal Width: 30mm,External Width: 35mm,Front Hub Spacing: 100mm or 10mm Boost versions,Rear Spacing; 135/142mm or 148mm Boost versions,Drillings: 32H,Disc Mount: IS 6-Bolt,Spoke Pattern: 3 cross,Recommended Tyre Size: 2.25- 2.8”.
Traverse, climb and descend. Our Chaos Enduro and DH race wheels are at home on the slopes of downhill tracks, climb comfortably between stages at any Enduro race and are now tubeless compatible.Chaos wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive, MT Supadrive DH and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.The Chaos Enduro wheelset is also available with the option of a MT 6Drive, for a quieter 30 click drive.Included FittingsFront Standard: 15mm x 100 thru, 9mm x 100 QR,Front Boost: 15×110 thru,Rear Standard: 12mmx142 thru, 9mm x 135 QR,Rear Boost: 12mm x 148 thru,Rear Super Boost: 12mm x 157 thru,.SpecificationsSpokes: Black double butted stainless spokes,Nipples: Black ED coated brass nipples,Rim Depth: 20mm,Internal Width: 22.5mm,External Width: 28mm,Front Hub Spacing: 100mm or 110mm Boost versions,Rear spacing: 135/142mm, 148mm Boost and DH150mm versions,Drillings: 32H,Disc Mount: IS 6-Bolt,Recommended Tyre size: 2- 2.5”.
The Vapour GXC wheelset is the lightest in the Vapour range. Crafted for the longest distance gravel races, ultra-distance adventure riding, XC racing, road plus as well as lightly loaded touring.Built with a 21mm internal width rim the Vapour GXC wheel is ideal for a gravel, road plus and narrower MTB tyres.As well as a lightweight and dependable rim, the Vapour GXC wheels utilise our all new GXC hubs specifically designed for this wheelset. The GXC hubs feature instantaneous 120 point engagement, centre lock, sealed bearings and wide spaced flanges for increased stiffness and durability.We have used non-proprietary J-bend spokes to ensure should the worst happen, you have a great chance of being able to fix your wheel and carry on your adventure.Supplied pre-taped the Vapour GXC is tubeless ready from the box.SpecificationsRims: Vapour,Hubs: GXC Supadrive ,Rim Depth: 22.5mm,Internal Width: 21mm,External Width: 26mm,Front Hub Spacing: 100mm qr and 15mm Thru included (12mm thru adaptor available aftermarket),Rear Spacing: 135 x QR5/10mm and 142 x 12mm Cr-mo tube thru axle,Drillings: 28H front, 32H rear,Disc Mount: Centerlock (optional 6 bolt adaptor available aftermarket).
Available from under 1500g for a pair, the Sub-4 wheels accelerate like nothing else, yet can still take impacts when trying out new lines. The front wheel is fully anodised while the rear has a CNC sidewall for consistent braking performance. Sub-4 Race wheels are built around our hugely successful MX Series hubs. MX Series hubs all feature huge flange spacing for lateral stiffness and sealed bearings for longevity all conditions. There are two drive options for the Sub-4 Rear wheel. Our MXR Supadrive hub with its instantaneous 120 point pickup Supadrive system, or MXR FW freewheel threaded hub as the simplified option which is well paired to the Halo Clickster 72 click freewheel. ###section### Product Specs WHEEL SIZE:20" HUB:Halo MXRC 36H cassette AXLE:Female Bolts DRIVE SIDE:Right Hand Side RIM:Halo Sub4 Rim SPOKES:Butted NIPPLES:Alloy WEIGHT:TBC
EX3 Expert BMX Race WheelsThe super-low weights of our new 1.5" Expert race wheels and the 120T Supadrive hub offer the younger riders outstanding acceleration, whilst the tough box section rims give riders the confidence and security to nail the track.Precision assembled and hand trued with Halo Double butted spokes, 7075 CNC alloy nipples and Halo MX series hubs and double wall, eyeleted Halo EX3 (1.5") rims.,Performance optimised 28 hole front radial lacing with 32H rear lacing for spoke strength where it's required.,Front rims are black anodised all over, while the rear rim has a CNC finished brake wall for precision braking performance.,Two rear hub options..Recommended weight limits:EX3 (1.5") 60Kg (130lbs).Specifications:Front:Halo MXF 28H hub (Red),Halo Double butted spokes (Black) - radial laced.,Halo 7075 CNC Alloy nipples (Red) ,Halo EX3 rim with eyelets (All Black),Weight: 625g exc. bolts,Supplied Cr-Mo axle bolts with alloy covers.,Spoke length: 166mm.Rear Cassette:Halo MXRC 32H cassette hub with 1/2 alloy driver (Red),Halo Double butted spokes (Black),Halo 7075 CNC Alloy nipples (Red),Halo EX3 rim with eyelets (Black with CNC brake wall),Weight: 673g (exc. bolts or sprocket.),Supplied with Cr-Mo axle bolts with alloy covers.,Spoke length: 175mm (non-drive side), 173mm (drive side) mm.Rear Freewheel:Halo MXR-FW screw-on freewheel hub. ,Halo Double butted spokes (Black),Halo 7075 CNC Alloy nipples (Red),Halo EX3 rim with eyelets (Black with CNC brake wall),Weight: 716g ,Supplied with Cr-Mo axle bolts with alloy covers.,Spoke length: 176mm ( non-drive side), 174mm (drive side) mm.
The Halo JX2 Mini wheels are lightest in our BMX Series and designed for younger riders. Available at just over 1250g the 20 X 11/8" JX2 Mini wheelset is perfect for young riders aiming to attack the track. The front wheel is fully anodised while the rear has a CNC sidewall for consistent braking performance ###section### Product Specs WHEEL SIZE:20" HUB:Halo MXRC Cassette AXLE:Female Bolts DRIVE SIDE:Right Hand Side RIM:Halo JX2 Rim SPOKES:Butted NIPPLES:Alloy WEIGHT:TBC
Our SAS wheels need no introduction and have a proven record for re-defining what strength is.Utilising a 30mm internal, T-10 heat treated alloy rim the SAS wheel set is the go to option for anyone who is looking for reliable and sturdy all use mountain bike wheels.As well as a hugely capable rim, the SAS wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.The anodised versions of our SAS rims can also be used with rim brakes. Naturally, the anodised finish will wear and reveal the silver coloured aluminium.As the braking surface is not CNC finished, there is a bedding in period.SpecificationRim Depth: 22mm,Internal Width: 30mm,External Width: 36mm,Front Hub Spacing: 100mm,Rear spacing: 135/142mm,Rim Joint type: Sleeved,Recommended Tyre size: 2.25-2.8".
Retro rims resemble European high quality rims from the 1970's and 80's but are made using modern extrusions and materials to offer high performance and low weight.Laced together with 32 stainless spokes to sealed bearing Halo Retro 5 Star polished hubs to produce high performance modern Halo Retro wheels.6D - Halo 6 Drive System:The ultra-dependable 6-Drive system: Smooth, quiet and reliable power transfer.6 reversed pawls, all independently sprung and featuring double tips, giving 12 point simultaneous engagement on a 30 click Cr-Mo drive ring powering the optional Cr-Mo or 7075 hard alloy splined freehub body. This results in an extremely positive and reliable drive system.The uncluttered freehub that a reversed pawl system gives, allows a cartridge bearing to be used directly under the freehub drive ring (rather than an offset position that is commonly used in conventional pawl systems that cram the pawl mechanism into the relatively small diameter of the freehub itself.)The resultant reduction in offset torque transfer from the freehub reduces leverage effect on the axle and ultimately increases bearing durability.Specifications:Rims Heat treated T10 extruded alloy,Hubs Halo Retro 5 Star,Freehub Halo 6 Drive,Freehub Body Shimano or Campag compatible options,Drillings 32H,Colour High Polish Finish with subtle laser logos,Weight Front 810g, Rear 1010g, Pair 1820g.
Developed using the proven technology of our well established mountain bike products our Fat bike wheels deliver excellent performance.Now with black powder coated 80mm wide single wall alloy rims and built with our silky smooth 6D Series Fat hubs, the Tundras are an excellent choice for any Fat bike.6D hubs feature a positive 30 point, reversed 6-pawl drive system and come supplied with a Shimano compatible 11spd alloy freehub. Please note: A 10spd spacer is included. Sram XD or Shimano Cr-Mo options are also available.Wheel specifications:32H 80mm single wall alloy rim with weight-saving cutouts.,Halo sealed bearing 6D Fat bike hubs.,Black stainless steel double butted spokes.,Red alloy nipples..Front hub specifications:135mm - supplied with 15mm thru-axle end caps and a 10mm bolt-in axle set.,Wheel weight 1325g..150mm - 150 x 15mm thru-axle only as standard.,Wheel weight 1355g..Rear hub specifications:170mm - supplied with 177 x 12mm thru-axle end caps and 170 x 10mm bolt-in axle set as standard. Fits regular QR or horizontal SS dropouts.,Wheel weight 1525g..190mm - supplied with 190 x 12mm or 197 x 12mm thru-axle end caps as standard.,Wheel weight 1530g..
DJD S.DRIVE Dirt Jump Disc, Single Speed, 11T Bush Drive, SupaDrive 120T engagement, Bolt-in - DJD Supa Drive Rear HubDeveloped with the help of Sam Pilgrim (and chosen by Matt Jones, Blake Samson and Sam Reynolds) we have taken the best-selling DJD Bush Drive hub and improved it further by adding the proven 120 teeth triple wedge pawl mechanism of the Supa Drive hub. This provides positive and secure drive, a freewheel sound like no other and micro-notch engagement gaps for that perfect pedal pick-up.BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes. The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 bolt-in Cro-Mo fixings and alloy caps. We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle - just in case the axle starts to spin when you don't want it to!14mm adaptors included: the large surface faces of the cones allow us to also use 10-14mm adaptor washers - making this hub suitable for 10mm or 14mm dropouts.,Forged & CNC finished body with slotted flanges.,Bush Driver with screw-on 11T sprocket.,Hollow Alloy axle with 6mm central hex.,Cr-Mo M10 Bolt-in fixings.,14mm adaptors included..FeaturesSuper strong lightweight alloy axle.,2 sealed main body bearings and 1 hardened plastic driver bush.,3 wedge pawls ensure positive drive.,120 points of engagement.,Lightweight forged CNC finished alloy hub shell.,11T x 1/8" drivers sprocket fitted standard. ,9,10,11,13,14,16t sprockets also available.SpecificationsDrillings : 32 or 36H,Axle : Hollow Alloy axle with 6mm central hex,Disc Mount : 6 Bolt,Centre to Flange Center Left: 34mm, Center Right: 35mm,OLD 135mm,Dimensions : Flange Diameter: 58mm,Colour : Red or Black,Weight : 326g.
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.At the core of our Vortex wheels are our all new instantaneous 120 point pick up, MTC Supadrive Boost and MTC Front Boost hubs, with center lock disc mounts, sealed bearings and super wide spaced flanges for increased stiffness and durability.100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.
Halo Retro road rim built onto a SP PV-8 Dynamo HubSpecificationsRims: Halo Retro,Hubs: SP Dynamo PV8,Front Hub Spacing: 100mm,Drillings: 32H,Spoke Pattern: 3 Cross,Colour: Silver.
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.At the core of our Vortex wheels are our new and improved instantaneous 120 point pick up MT Supadrive and MT Front hubs, with sealed bearings and super wide spaced flanges for increased stiffness and durability.100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.Coloured decal kits available aftermarket.Included Fittings:Front Standard: 100 x 15mm thru, 100 x 9mm QR,Front Boost: 110 x 15mm thru,Rear Standard: 142 x 12mm thru, 135 x 9mm QR,Rear Boost: 148 x 12mm thru,Rear Super Boost: 157 x 12mm thru.Specifications:Spokes: Black double butted stainless spokes,Nipples: Black brass,Rim Depth: 20.75mm,Internal Width: 33mm,External Width: 38mm,Front Hub Spacing: 100mm or 110mm Boost,Rear Spacing: 135/142mm or 148mm Boost,Rim Joint Type: Sleeved,Drillings: 32H,Hub Type: Disc Hub,Freehub: Shimano HG or SRAM XD versions,Drive System: Supadrive,Freehub Body: Alloy,Disc Mount: 6 Bolt,Spoke Pattern: 3X,Recommended Tyre Size: 2.35-2.8",Colour: Stealth Black.
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.Durability, modularity and light weights make the MT Series a simple choice.Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehub. Please refer to the GXC Supadrive for a 11 speed road cassette compatibility.An additional Boost adaptor kit is also available, to retrofit this hub into Boost compatible frames.Replacement axle kits for Supadrive hub:HXHASVTMHG – Suitable for HG type freehub includes 135mm QR and 142x12mm End cones,HXHASVTMXD – Suitable for XD type freehub includes 135mm QR and 142x12mm End cones,.SpecificationsMaterial: 6061 Alloy forged hub shell,Drillings: 32H or 36H,Bearings: 2 x 6902 (hub) 3 x 6802 (SRAM Freehub) or 1 x 6902 and 6802 (HG Freehub),Axle: Cro Mo with 135mm QR/12x142mm thru ends included,Disc Mount: IS 6-Bolt,Ratchet: 120 teeth triple-wedge pawl mechanism,Freehub Body: Shimano HG or Sram XD,Spoke Hole Circle Diameter (PCD): 58mm,Centre to Flange: Left: 34mm, Right: 20mm,OLD: 135/142mm,Model: Ref S-DRV-FG,Colour: Black, White, Red, Blue or Silver..
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.Durability, modularity and light weights make the MT Series a simple choice.Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehubSpecifications:Material: 6061 Alloy forged hub shell,Drillings: 32H,Bearings: 2 x 6902 (hub) 3 x 6802 (SRAM Freehub) or 1 x 6902 and 6802 (HG Freehub),Axle: 12 x 148mm thru-axle,Disc Mount: IS 6-Bolt,Freehub: 120 teeth triple-wedge pawl mechanism,Freehub Body: Shimano HG or Sram XD,Dimensions: C-R 25mm, C-L 37mm, flange 58mm,Colour: Black.
120 teeth triple wedge pawl mechanism provides positive and secure drive, a freewheel sound like no other, and micro-notch engagement gaps for that perfect pedal pick-up.SpecificationsMaterial 6061 Alloy forged hub shell,Drillings 32H,Bearings 6902 (hub) 6802/6902 (freehub),Axle 12 x 150mm thru-axle,Disc Mount IS 6-Bolt,Ratchet 120 teeth triple-wedge pawl mechanism,Freehub Body Shimano HG or Sram XD,Spoke Hole Circle Diameter (PCD) 58mm,Centre to Flange Left: 40mm, Right: 30mm,OLD 150mm,Model Ref S-DRV150,Colour Black, White or Red,Weight 307g.
Sitting neatly between traditional mountain bike and fat bike standards, these Plus-sized XC/Trail wheels have been designed specifically for 2.8 - 3.0" tyres. Their 50mm wide tubeless-ready rims have a 45mm internal measurement which gives increased stability, better traction and float while helping to reduce pinch flats.Front wheelChoice of Black Spin Doctor 6F hubs,Weight – from 1128g.Rear wheel (6D hub)Choice of Black Spin Doctor 6D hubs (HG or XD freehub),12 x 142mm thru-axle and 9mm QR end caps included,Weight – from 1316g.Rear wheel (Supa Drive hub)Black Supa Drive hub (HG or XD freehub),12 x 142mm thru-axle,Weight – from 1316g.
Our line of Vapour wheels are the lightweight edge.The trail focused Vapour 35 wheels are built with outright speed and reliability in mind.Utilising a wide 30mm internal width rim the Vapour 35 wheels bridge the gap between plus sized wheels and more narrow traditional offerings. With a greater width comes increased tyre volume and stability.In addition to an adept rim, the Vapour 35 wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.Supplied pre-taped the Vapour 35 is tubeless ready from the box.The Vapour 35 wheel set is also available with the option of a MT 6Drive hub, for a quieter 30 click drive.Included FittingsRear Standard 12mmx142 thru, 9mm x 135 QR,Rear Boost 12mm x 148 thru.Please note front fittings are not included SpecificationsRims Sleeve jointed, tubeless-ready, alloy clincher,Spokes Black double butted stainless spokes,Nipples Black ED coated brass nipples,Rim Depth 19mm,Internal Width 30mm,External Width 35mm,Front Hub Spacing 100mm or 110mm Boost versions,Rear spacing 135/142mm or 148mm Boost versions,Drillings 32H,Disc Mount IS 6-Bolt,Spoke pattern 3x,Recommended Tyre size 2.25- 2.8”,Colour Anodised black hub and rim with black laser etched graphics.