Lightweight CNC alloy with short thread for MXRC Cassette hub. CNC machined lightweight aluminium. Only suitable for MXRC cassette hub.
Hex Key SkewersLightweight Cr-Mo threaded rod with an allen type hex key fitting and coloured alloy end covers.The absence of any lever means these skewers offer improved security over a traditional QR skewer.Features a steel Halo 'no-turn tab' to prevent the end cone from rotating whilst doing up or removing. There's also a 15 x 3mm cone spanner recess cut into nut, just in case the no-turn tab cannot operate.Features:Cr-Mo rods.,Anodised alloy end covers.,Steel 'no-turn' tabbed washer insert.,Serrated alloy frame grip surfaces.,Available in anodised Black, Gold, Blue, Green, Red, Purple or White Powder coated..Maximum dropout capacity:Front (100mm); 6.0mm thick,Rear (130mm) ; 9.0mm thick,Rear (135mm) ; 6.5mm thick.Extra Long versions also availableTorque setting: 7Nm*Important information: Not recommended for aggressive off road use.
Some riders need to fit Spin Doctor hubs to frames or forks with 14mm dropoutsTo convert an existing Halo Spin Doctor Disc hub into a BMX type nutted hub; simply remove the Alloy QR ends from your Spin Doctor Front Disc hub and fit these CNC machined Cro-Mo stub axlesComplete with steel nuts and washers.**Note: for HUHASDA4 Wide Boy 15 or 20mm thru axle hubs, HUHASDAQ 9mm QR Axle Conversion must be purchased for use.**
HUHAZSVA2H - 12mm thru Shimano HG Cassette. 142, 148 and 157mm O.L.D.HUHAZSVA2X - 12mm thru SRAM XD Cassette. 142, 148 and 157mm O.L.D.HUHAZSVADH - 12mm thru Shimano HG Cassette. 135 and 150mm O.L.D.HUHAZSVADX - 12mm thru SRAM XD Cassette. 135 and 150mm O.L.D.HUHAZSVAQH - QR, Shimano HG Cassette. 135 or 141mm O.L.D.HUHAZSVAQX - QR, SRAM XD Cassette. 135 or 141mm O.L.D.
Halo has developed a 12mm T-axle to work with the DJD BD hub for use with 12mm thru frames.Weight: 26g.These axles work with Halo DJD BD hubs and Halo DJD SupaDrive hubs. .
Halo DJD BD Axle kit:10mmx135mm Female threaded axle.Halo 10mm female bolt type alloy hollow axle(bolts not included) with 6mm hex broach in centre of axle.,Fits M10 x 1.5mm bolts.,Weight: 46g..
Fixed Sprocket LockringsPrecision CNC machined.,2 dog type.,L/H thread - 1.29"x24T,Weight: 7g,7075 Alloy in anodised Black, Blue, Red, Green, Gold or Purple.,Larger point of contact with hub for increased security.SpecificationsMaterial 7075 Alloy,Threads L/H thread - 1.29"x24T,Colour Anodised Black, Blue, Red, Green, Gold or Purple.,Weight 7g.Note: General Fixed sprocket check:For correct fixed use, the fixed sprocket should NEVER move on the hub when pedal force is applied in both directions.,i.e. if the sprocket moves, then something is wrong.,Continued use with a fixed sprocket that moves will result in damage to the hub..
Precision CNC machined alloy axle nuts and washer sets in lots of bling bling colours..., Alloy axle nuts and washer sets in M9 or M10 (mm).Lots of bling colours.Precision CNC machined from 6061 Alloy.Red, Blue, Black, Gold or Purple anodised.Sold in pairs..
Track QR Front AxleQR axle and spacers for Halo Front Track hub.Axle to convert your front Halo track hub from a nutted to a Quick Release.Silver100mm width.
20-15mm XTR adaptor SET for Wide Boy front hub.2 spacers and 2 inserts.CNC Alloy, Black anodised.Made in Taiwan.
Complete road gear cable set designed using stainless steel inner wires for increased service lifeFitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one pack,Includes 1.2 mm inner wires (2 x 2000 mm),and black 4 mm outer casing for a complete bike (2 x 600 mm, and 1 x 320 mm), and all end caps,Stainless steel inner wires provide smooth shifting and higher corrosion resistance,Outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction,Special construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quickly,Outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
DJD BD Internal Drive Ring, Rear - Replacement Internal Drive ring for DJD BD hubs ONLYDJD Bush Drive ring,Internal Drive ring,30T.
Wide Boy 20mm BMX Adaptor., 20mm x100mm adaptor SET for Wide Boy to use with BMX - CNC Alloy
Wide Boy 20mm adaptor cups:20mm x 110mm adaptor SET for Wide Boy front hub..CNC Alloy. Black anodised. Pair..Wide Boy 15mm adaptor cups:15mm x 100mm adaptor SET for Wide Boy front hub..2 spacers and 2 inserts. CNC Alloy, Black anodised..Wide Boy QR Cones:Spare Adaptor cones for QR Axle. Blk. Pr..9x100mm spaced QR fitting. Blk CNC alloy caps. Pr..(Note - these QR cones are replacement spares - as the Wide Boy hub includes these items when purchased new)..Wide Boy 20mm BMX:20mm x 100mm adaptor SET to use with BMX front forks..
Spacer enabling fitment of a rear wheel with a 10mm (3/8 inch) axle to a 14mm frame.Made of super hard wearing steel.
Designed to keep you comfortable on an all-day ride.Featuring a durable reinforced foot bed, air mesh sweat wicking upper and 16cm long cuff.
Halo Spin Doctor 20mm Cones.Spare Adaptor cones to allow Spin Doctor front hub to change from;9 x 100mm spaced QR fitting to; 20 x 110mm Through Axle type use.20mm T-axle cones.BlackCNC alloy.Supplied as a pair..Note - these are replacement spares - as the Spin Doctor hub inc. these items when purchased new.Note: There are 2 types... earlier versions have offset spaced bearing on Disc side, and therefore require 2 different size cones, later hub models (mid 2006 onwards) have equal spacing left and right side.) Double check which you require before ordering.
Precision CNC machined.2 dog type.L/H thread - 1.29 inch x 24TpiCromoly steelChrome platedLarger point of contact with hub for increased security.Note: General Fixed cog check: for correct fixed use, the fixed cog should Never move on the hub when pedal force is applied in both directions. i.e. if the cog moves, then something is wrong. Continued use with a fixed cog that moves will result in damage to the hub.
Pack of 50 Halo 7075 alloy nipples. These nipples are forged from high quality aluminum with a precision CNC machined finish. ###section### Product Specs TYPE: N/A MATERIAL: Alloy PACK SIZE: 50 NIPPLES: N/A WEIGHT: TBC