Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Small, handy tool designed to make extracting Schrader and removable Presta valve cores and valve extenders simple. 5mm wrench flats provide additional leverage, especially useful when removing cores that have been used with sealant. A perfect 'take along' tool especially for tubeless users and people running deep section rims ,anodized in vivid Park Tool blue to make is stand out on your workbench. Made in the USA and covered by Park's legendary limited lifetime warranty.
Industry standard cone wrenches with unmatched performanceThe Y-head design puts material where it is needed for strength and durabilityMilitary grade phosphate finish ensures an accurate fit and consistent qualityThin enough to be used on the narrowest of conesHigh strength tool steelLong vinyl dipped handle for leverage and comfort
Part of a comprehensive range of freewheel and bottom bracket removal toolsOversized centre hole and thin wall design allows use without removal of cones and locknutsInvestment cast and heat-treated for strength and durabilityOne-inch base fits end of SR-1 FRW-1 Park tools or simply an adjustable wrench or bench viceHigh strength tool steelFits 12-tooth internally-splined Record Chorus and Athena cartridge bottom brackets and Campagnolo cassette hub lockringsCompatible with 11-speed lockringsMade in the USA and covered by Park Tool's legendary limited lifetime warranty
Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassemblyIdeal for bottom bracket and pedal threads pressed headset cups seat posts quill stems etcSeals and protects parts from corrosion and rust under the most extreme conditionsFor use on steel aluminium and titanium
Tool for removing and fitting 6 notch cups on sealed Bottom bracketsFits cartridge cups used on Sachs and Campagnolo Veloce, Mirage, and AvantiAlso fits Thun SKF Series sealed cartridge bottom bracketsLong vinyl coated handle gives leverage and grip
The Park Tool BBT-4 is made for the installation and removal of 6-notch cartridge cups used on Campagnolo Veloce, Mirage, Centaur, Daytona and Avanti sealed cartridge bottom brackets. Also fits Thun SKF Series sealed cartridge bottom brackets. The handle is vinyl coated for extra comfort, leverage and grip.
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain before other drive train components also start to wear out fastIf the 1% side fits into the chain the chain is worn out and should be replaced immediatelyMade from precision laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
Featuring a two-color Park Tool logo the SPG-1 Stainless Steel Pint Glass is durable and dishwasher safeMade of 304 Stainless SteelHolds 16 fluid ounces
This updated cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs. It now also fits the SRAM XX1 11-speed cassettes.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsGuide pin helps to hold the cassette tool in placeThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
The Park Tool SW13C is a comfortable, vinyl dipped, two-sided Spoke Wrench. It's designed to easily access Mavic fittings. Fits both Mavic 9mm threaded eyelets and 7mm integrated nipples.
This cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsAlways use a quick release skewer to hold the tool in place and snug to cogs when loosening; For solid axles, use the axle nutThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
Three hex wrenches in an effective packageExcellent ergonomics and effective leverage as the composite centre fits into the palm of the handSpeeds any job up as you have three hex keys in your hand at any one timeMade from heat-treated Bondhus Protanium high torque steel for a long life2, 2.5, and 3 mm
Genuine Park. This cassette removal tool is Campagnolo specific, heat treated and can be used in either a wrench or a bench vice. It fits all Campag cassette lockrings and certain Campag bottom brackets. Key Features: Compatible with all Campagnolo cassette lockrings including 11 speed. Also fits the following Campagnolo bottom brackets: Record, Chorus, Centaur and Athena. Thin wall construction allows it to be used without removing the cones and locknuts. Heat treated alloy is tough and dependable, that's why Park Tool are the choice of mechanics all over the world. Can be used in either a bench vice or a wrench using the 1 inch base fitting.
The Park Tool carbon saw blade fits the Park Tool SAW-1 Hacksaw and most 12" hacksaws. The CSB-1 is a wider carbon fibre specific blade and is designed for use with the SG-8 Saw Guide. Please Note: Similar to a grinding stone, do not use this blade on aluminium.
Park Tool Carbon Cutting Saw Blade (CSB-1)Designed to slice through carbon handlebars, forks and seatposts with ease, the Saw Blade from Park Tool will make light work of the task at hand. Suitable to be used with the SG-8 Saw Guide, the Park Tool SAW-1 Hacksaw and 12" hacksaws, it's the ideal addition to your workshop. Features:Material: Tungsten steelCompatibility: SG-8 Saw Guide, Fits the Park Tool SAW-1 Hacksaw and most 12" hacksawsNOTE: Like a grinding stone, do not use this blade on aluminium.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover (FR-1.3) The Freewheel Remover FR-1.3 is another well-crafted tool from Park Tool, designed for the efficient and easy removal and installation of the most common thread-on 12-spline 5-10-speed freewheels. Simple Freewheel Removal and Fitting Fitting perfectly on to your axle, the FR-1.3 makes light work of fastening or loosening your freewheel for quick and easy removal and replacement. Compatible with a wide range of freewheels, this Park Tool device features an enlarged thru-hole, capable of accepting wheels with axles up to 14mm diameters, including E-Bike wheels. The 1" hexagonal end of the FR-1.3 makes it easily compatible with most wrenches and bench vices for additional leverage and support. Features: Compatibility: Shimano, Sachs Aris, Sun Race, DNP Epoch and other 5-10-speed freewheels Size: 22.6 mm Diameter + 1" Hexagonal Head Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Three hex wrenches in an effective package Excellent ergonomics and effective leverage as the composite centre fits into the palm of the hand Speeds any job up as you have three hex keys in your hand at any one time Made from heat-treated Bondhus Protanium high torque steel for a long life 2 2.5 and 3 mm Made in the USA and covered by Park Tool's legendary limited lifetime warranty