Heat treated alloy tool steel, one inch base fits wrench or bench vise. The FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.Cassette Lockring Tool with 12mm Guide Pin:Utilizes a 12mm guide pin to stabilize the tool in use,Fits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others (23.5mm diameter),Fits some Shimano® and similar disc brake rotor lockring,.Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.Cassette Lockring Tool with 5mm Guide Pin:Fits Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and other cassette lockrings,Also fits some Shimano® disc brake lockrings,Guide pin stabilizes tool.
Ideal for wheel truing when there s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holder. The SW-9 combines two common spoke nipple sizes, 0.127"/3.23mm (SW-0) and 0.136"/3.45mm (SW-2). Forged, machined, heat treated, plated and vinyl dipped for years of dependable use.The SW-9 combines two common spoke nipple sizes, .127 /3.23mm (Park Tool Black SW-0) and 0.136 /3.45mm (Park Tool Red SW-2)Forged, machined, heat treated, plated and vinyl dipped for years of dependable use
The Park Tool IB1C is the perfect tool for taking on rides. The strong, compact, lightweight IB1C features our unique I-Beam handle surrounded by 3, 4, 5, 6 and 8mm hex wrenches and a straight blade screwdriver.
The Park Tool EWS-1 Electronic Wire 3-Way Tool is a handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy.Durable composite body is durable and prevents scratching of expensive componentsAngled Shimano; Di2; E-Tube; ends allow for both installation and removal in tight spacesUniversal coin cell tool helps remove and install battery covers on SRAM eTap
Small handy tool designed to make extracting Schrader and removable Presta valve cores and valve extenders simple5mm wrench flats provide additional leverage especially useful when removing cores that have been used with sealantA perfect 'take along' tool especially for tubeless users and people running deep section rimsAnodized in vivid Park Tool blue to make is stand out on your workbench
Small, handy tool designed to make extracting Schrader and removable Presta valve cores and valve extenders simple5mm wrench flats give additional leverage, especially useful when removing cores that have been used with sealant,A perfect 'take along' tool especially for tubeless users and people running deep section rims,Anodized in vivid Park Tool blue to make is stand out on your workbench.
Tool for removing and fitting 6 notch cups on sealed Bottom bracketsFits cartridge cups used on Sachs and Campagnolo Veloce Mirage and AvantiAlso fits Thun SKF Series sealed cartridge bottom bracketsLong vinyl coatedhandle provides leverage and grip
Weve been receiving calls from both shop and home mechanics looking for a thin wrench to fit the centring flats pivot nuts and lock nuts on many popular brake callipersThe new OBW-4 wrench is the answer. It has 10 11 12 and 13 mm openings and is specifically designed to fit the narrow flats found on some of these brakes that can make using standard wrenches difficultThis tool is particularly useful when working on dual pivot and side pull brake callipers seen on both current and older models from Campagnolo Shimano SRAM and Tektro amongst othersMade from heat treated nickel plated steel for long life and with a hole for hanging on your tool boardMade in the USA and covered by Park Tool's legendary limited lifetime warranty
The universal design of the Park Tool crank puller has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms. Also fits BNI cranks on Bosch® electric bikes (E-Bikes). The CWP-7 is made for the 22 x 1mm threading in common cranks.
Park Tool Compact Crank Wrench and Puller CWP-7Designed to be compatible with most crank arms on the market, the CWP-7 Crank Wrench and Puller from bike tool experts Park Tool can be used to remove crank arms from both square taper and splined type bottom brackets, including Shimano Octalink and SRAM/Truvativ ISIS Drive types. Features: Crank Arm Compatibility: Made for the 22 x 1mm threading in common cranks Bottom Bracket Compatibility: Square taper and splined (ISIS Drive, Octalink) crank arms Rotating tip pressed into each end of the tool (11.3mm and 16.3mm) Also fits BNI cranks on Bosch E-Bikes Manufacturer's Part Number: QKCWP7CWeight: 226g / 0.5lbsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The FR-5.2GT has been specifically designed for removing and installing cassette lockrings from thru axle hubs. It uses a 12mm guide pin to help stabilise the tool while in use making it easier for you to use. This cassette lockring tool fits 12 spline cassette lockrings ranging from Shimano, SRAM (including 1x), SunRace, Sun Tour, Chris king and other (23.5mm diameter). It can also be used to fit and remove some Shimano and similar type disc brake rotor lockrings.
The Park Tool FR2C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and fits Sun Tour two-notch freewheels. Not recommended for Sun Tour four to six notch freewheels.
The Park Tool SZR-1 shop scissors feature dual density grips and stainless steel blades which are ideal for cutting handlebar tape, zip ties, packing material, duct tape, rim tape, etc.
The precision-sized Park Tool triple spoke key fits the three most popular spoke nipple sizes on the market. This durable bike wheel repair tool electroless nickel plated for years of service.
Ideal for bottom bracket and pedal threads, pressed headset cups, seatposts, quill stems, etc.
Made from a heat-treated alloy, the Park Tool cassette tool FR-5.2 allows for the removal of cones and locknuts. It has 12 splines that are approximately 23.4mm across, the one-inch base allows it to be used with a wench or a bench vice. Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation. The Park Tool FR-5.2 is designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings. It can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Thin wall construction allows use without the removal of cones and locknuts.
Park Tool Triple Spoke Wrench (SW-7.2)With its round, smooth shape that fits comfortably in the hand, the SW-7.2 spoke nipple key is ideal for home mechanics or to carry with you on long distance touring rides. Park Tool has precision machined and Nickel plated it for extra durability and it’s compatible with three of the most commonly used sizes. Features: Fits .127" (3.23mm), .130" (3.30mm) & .136" (3.45mm) nipples Lightweight and portable Nickel platedBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cassette Lockring Tool FR-5.2Enjoy quick and simple removal and installation of cassette lockrings with this handy tool from Park Tool. Designed to be hassle-free, this lockring tool is suitable for use with a variety of cassette lockrings, making it a versatile essential for any cycle workshop.Easy and Efficient Lockring RemovalDurably built from heat-treated alloy tool steel, for daily garage and workshop use, the Park Tool Cassette Lockring Tool FR-5.2 has a thin wall construction, with 12 splines for accurate engagement with similarly splined lockrings. Specially designed to make the job easy, there is no need to remove cones and locknuts when using this fantastic bit of kit.Sized perfectly to be used with a lockring wrench or bench vice for extra leverage, the tool is compatible with a range of cassette lockrings including Shimano, SRAM, and Chris King, and some Shimano disc brake lockrings. With the Park Tool Cassette Lockring Tool FR-5.2 in your toolbox, you will never be short of work. Features: Material: Heat Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King, and other cassette lockrings + some Shimano disc brake lockrings Size: 1" base with 12 splines (approximately 23.4mm across), 12mm centre bore for axle clearance Note for Usage: Hold the tool in place with a quick-release skewer and have it snug to cogs when loosening. Use the axle nut for solid axles.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool P-Handled Hex Wrench - PH These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life.Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts.Features: Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applicationsBuy Park Tool Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Anti-Seize Compound (ASC-1)Ideal for assembling your components, this Anti-Seize Compound from Park Tool helps to prevent abrasion between threaded and press-fit connections. Features:Seals and protects parts from corrosion and rust under the most extreme conditionsFor use on steel, aluminium, and titaniumWeight: 112g Buy Park Tool Anti-Seize Compound from Chain Reaction Cycles, the World's Largest Online Bike Store.