Mudhugger Shorty EVO Bolt-On Front MudguardThe Mudhugger Shorty EVO is a shorter variant of the Mudhugger EVO mudguard/fender that's compatible with modern mountain bike (MTB) suspension forks.The Mudhugger EVO is designed around the latest Fox 36 and 38's and Rockshox Zeb (not compatible with 38mm offset Zeb) to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for Zeb, see options) but still compatible with older (2017) onwards Fox forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Also compatible with Ohlins RXF and Downhill (DH) forks (adapter bracket required, see options). Please Note: For all Downhill forks see the options for FOX and Ohlins DH version. Features: Length: 400mm total - Rear extension 265mm, front extension 105mm Weight: 105g, without fittings Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your Fox forks. For RockShox Zeb and Ohlins an Adapter Pack is required, sold separately Shorty version of the Long EVO More mud clearance No more crown fouling at full-compression Subtle kicker to keep length as short as possible without compromising spray protection 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crud Roadracer Mk3 Mudguard SetKeep yourself protected from unwanted spray and dirt with the Mk3 Mudguard Set from Crud. A redesign of the traditional mudguard, this set features bolted fixings at the brake bridges and/or rigid plastic utilised in the main arc for optimum protection when tackling rough terrain. Crud's Road Racer concept turns orthodox road mudguard designs on their head. The designers at Crud reasoned that if you could float the mudguard off the rim, then you could do away with a lot of the traditional fixings. These mudguards just hover in place so there is nothing to rattle or rub.Features:Hovers in placeNothing to rattle or rubNo tools neededFits bikes with as little as 4mm clearanceFits up to 38mm tyre widthsFits with disc brakesUse: Commuter, Cyclocross, Touring, RoadWeight: 180g (pair)Buy Crud Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crud Race Pac Mudguard SetKeep yourself protected from unwanted spray and mud with this Race Pac Mudguard Set from Crud. Featuring a lightweight design, this front and rear mudguard set fits any bike thanks to the supplied fittings making it incredibly versatile. Features: Direct mount where frame bosses availableAll-new rear mudguard with a bracket that fits in under a minute with just a 5mm Allen keyCatches any loose mud that gets flicked up from the rear wheel and keeps your back cleanEasy to fit any seat pin with the supplied bracket and shims Buy Crud Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crud Catcher Front Mudguard Seeing as we had updated the Raceguard, we thought we might as well do a number on the Crud Catcher as well. We basically took the futuristic shape of the old ZX Crud Catcher, and crafted a soft nose on it.While we were at it we put some protective cushioning between the frame and the blade, and moved the fixing lugs to accommodate fatter frame tubes. Features: Soft nose. Fits in seconds. Rubber frame pad. Buy Crud Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts NeoGuard Front Mudguard Introducing the new neoprene mudguard called “NeoGuard”; this is an innovative solution to prevent you getting mud in your face when out riding. Traditional mud guards are ugly and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down.The NeoGuard (Patent Pending) is a handy and effective solution to this problem. It throws the mud off every time the fork compresses keeping your bike light and agile. It is simple to fit and very lightweight, this mudguard is perfect for both downhill or cross-country and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you'll never get caught out again. The NeoGuard has been fitted on all the forks listed below; however it is likely to fit many others.Features: Extra Small (18g) Marzocchi Corsa Marzocchi MX Pro Lo (80-100mm) RockShox Reba RockShox Recon RockShox Argyle RockShox Tura (100mm)* * Fox Forx Float 32 (130mm)* Fox Forx F100 Fox Forx F120 Small (20g) Marzocchi MX Pro Lo (120mm) Marzocchi MX Marzocchi XC Marzocchi M2 Marzocchi Marathon Marzocchi Dirt Jumper Marzocchi 4X Marzocchi MZ RockShox Pike RockShox Domain (115mm)* RockShox Tora (130mm)* RockShox 327 RockShox Revelation Fox Forx Float 36 Fox Forx Talas 36 Fox Forx Van 36 Fox Forx Float 32 (140mm to 150mm)* Fox Forx Talas 32 Fox Forx Van 32. Medium (21g) Marzocchi AM Marzocchi AM 4 (160mm) Marzocchi Z1 Marzocchi 55 R Marzocchi 55 TST Marzocchi Junior T Marzocchi Super T Marzocchi Drop Off (170mm)* RockShox Domain (160mm)* RockShox Totem RockShox Lyrik (115-160mm) Large (25g) Marzocchi 888 Marzocchi 66 RockShox Boxxer Fox 40 Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts NeoGuard Front Mudguard Introducing the new neoprene mudguard called “NeoGuard”; this is an innovative solution to prevent you getting mud in your face when out riding. Traditional mud guards are ugly and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down.The NeoGuard (Patent Pending) is a handy and effective solution to this problem. It throws the mud off every time the fork compresses keeping your bike light and agile. It is simple to fit and very lightweight, this mudguard is perfect for both downhill or cross-country and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you'll never get caught out again. The NeoGuard has been fitted on all the forks listed below; however it is likely to fit many others.Features: Extra Small (18g) Marzocchi Corsa Marzocchi MX Pro Lo (80-100mm) RockShox Reba RockShox Recon RockShox Argyle RockShox Tura (100mm)* * Fox Forx Float 32 (130mm)* Fox Forx F100 Fox Forx F120 Small (20g) Marzocchi MX Pro Lo (120mm) Marzocchi MX Marzocchi XC Marzocchi M2 Marzocchi Marathon Marzocchi Dirt Jumper Marzocchi 4X Marzocchi MZ RockShox Pike RockShox Domain (115mm)* RockShox Tora (130mm)* RockShox 327 RockShox Revelation Fox Forx Float 36 Fox Forx Talas 36 Fox Forx Van 36 Fox Forx Float 32 (140mm to 150mm)* Fox Forx Talas 32 Fox Forx Van 32. Medium (21g) Marzocchi AM Marzocchi AM 4 (160mm) Marzocchi Z1 Marzocchi 55 R Marzocchi 55 TST Marzocchi Junior T Marzocchi Super T Marzocchi Drop Off (170mm)* RockShox Domain (160mm)* RockShox Totem RockShox Lyrik (115-160mm) Large (25g) Marzocchi 888 Marzocchi 66 RockShox Boxxer Fox 40 Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Ziptie Clip-On Front MudguardThe EVO Ziptie Front Mudguard from Mudhugger is a stiff and durable mudguard that's held in place with zip ties. And, it's ideal for use with downhill (DH) and enduro bikes in all weather and trail conditions.Are you ready? The world's fastest mudguard is evolving, the Mudhugger EVO Ziptie, designed with the help of DH World Cup and EWS racers. With the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost (not reverse fork brace forks though). Optimum length, not too short, no longer than needed. Plus, it features a subtle kicker to keep the length as short as possible without compromising spray protection and is strong enough for DH racing at the highest level. Features: Length: 515mm - Rear extension 330mm, front extension 185mm Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full compression 100% recycled PP Designed, made and packed in the UK Weight: 120g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
MudHugger Front Gravel Hugger MudguardThe Front Gravel Hugger is a gravel bike-specific mudguard that protects you from trail debris flicking up, water splashing over you and anything else your tyres may kick up towards you. Wide Gravel Bike MudguardFollowing the tried and tested tyre hugging design of the MTB Mudhuggers, the GravelHugger is designed to fit most fork, wheel and tyre (up to 50mm wide) combos for your gravel bikes. To reduce single-use plastic waste and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be used if you'd prefer to fit the guard and leave on your bike at all times. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Fork Compatibility: Suits all solid 650b and 700c forks Includes O rings for non-permanent installation Weight: 150g (approx)Buy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Rear Gravel Hugger MudguardIdeal for gravel riding, wet weather cycling for blasting down muddy routes, the MudHugger Rear Gravel Hugger protects your back from rear wheel spray, gravel and grit.Secure, Strong and LightweightThe Rear GravelHugger is designed to be attached to the bike with zipties as these afford the most secure way to fitting. See fitting vid below, fitting the new GH is the same as the tried and tested MTB Rear Mudhugger. Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays (with angles approx 40-55 degrees) and designed for tyres up to 50mm wide. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, ensure you use this tape, invisframe, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Weight: approx 150gBuy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.