Topeak DeFender RC1/RC11 Clip-On Mudguard SetA brilliantly crafted and protective set of mudguards, Topeak's DeFender RC1/RC11 Mudguard Set combines fantastic and easy fitting with high-performance when it comes to stopping splashes and dirt from spoiling your ride.Lightweight and Easy-To-Fit Front and Rear MudguardsSuitable for road race bikes with 700C wheels, the DeFender RC1/RC11 Mudguard Set features a front fender with a quick-release bolt clip and a simple and secure mounting system on the rear guard for speedy installation and removal. Constructed from injected high impact resistant plastic with a polished underside to prevent dirt and mud build-up, each guard is equipped with a DuaLink adjustment system, allowing you to fix them in your preferred angled position for customised defence against the elements.A brilliant partnership, the DeFender RC1/RC11 Mudguard Set from Topeak offers top-end protection from front to back. Features: Material: Injected High Impact Resistant Plastic Suitability: Road bikes with 700C wheels Attachment: Front (RC1): Adjustable straps with Quick-Release bolt clip; Rear (RC11); QR seatpost attachment (fits all diameters) Size: RC1: 32 x 14 x 8.3cm; RC11: 55.8 x 5.8 x 3.7cm Weight: RC1: 39g; RC11: 117g Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak DeFender RX 279er Clip-On Rear MudguardThe perfect mudguard for 27.5" and 29" MTB wheels, the DeFender RX 279er Rear Mudguard expertly helps to keep you clear of splatters and stains as you navigate sloppy and sticky terrains.Lightweight and Durable Mud Protection Easy to remove and install due to its quick-release seatpost attachment, the DeFender RX 279er Rear Mudguard can be adjusted to your optimum height and angle to make sure you are covered from whatver your rear wheel throws at you. The high impact plastic construction ensures low weight is maintained, while the polished underside stops mud and dirt from building up while keeping it easy to clean. A brilliant addition to mountain bikes with tyres up to 3" wide, the DeFender RX 279er Rear Mudguard superbly lives up to its name. Features: Material: Two-tone Injected High Impact Resistant Plastic Attachment: Quick Release seatpost attachment Compatibility: MTBS with 27.5" and 29.5" wheels, up to 3" wide tyres Size: 61 x 18 x 10cm Weight: 226g Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Defender M1/XC11 Clip-On Mudguard SetDeFender M1 is compatible with all standard front forks including reverse arch designs; the unique quick release attachment system integrates the DeFender M1 seamlessly with the front of your bike.The XC11 is a lightweight, removable rear fender providing exceptional mud/spray protection and built specifically for 27.5" (650B) mountain bikes. Multiple pivots allow easy fender angle adjustment for a perfect fit while the quick release clamp adjusts to fit ø25.4 - ø34.9mm seat posts. Advanced high impact plastic is co-moulded to a flexible trailing edge for resistance to impacts. Both fenders feature a highly polished underside to prevent mud build-up and aids in cleaning. Features: Attachment (Front): QR Fork Attachment fits ø19.6 - ø26mm & ø27.7 - ø35mm steerer tube Attachment (Rear): Slip joint clamp fits ø25.4 - ø34.9mm seatposts Multiple angles adjustable (XC11) Two tone injected high impact resistant plastic Highly polished underside Size (L x W x H): 64x8.5x15cm - M1; 62x10.2x7cm - XC11 Weight: 208g/7.32oz - M1; 215g/7.57oz - XC11 Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Defender M1/XC11 Clip-On Mudguard SetDeFender M1 is compatible with all standard front forks including reverse arch designs; the unique quick release attachment system integrates the DeFender M1 seamlessly with the front of your bike.The XC11 is a lightweight, removable rear fender providing exceptional mud/spray protection and built specifically for 27.5" (650B) mountain bikes. Multiple pivots allow easy fender angle adjustment for a perfect fit while the quick release clamp adjusts to fit ø25.4 - ø34.9mm seat posts. Advanced high impact plastic is co-moulded to a flexible trailing edge for resistance to impacts. Both fenders feature a highly polished underside to prevent mud build-up and aids in cleaning. Features: Attachment (Front): QR Fork Attachment fits ø19.6 - ø26mm & ø27.7 - ø35mm steerer tube Attachment (Rear): Slip joint clamp fits ø25.4 - ø34.9mm seatposts Multiple angles adjustable (XC11) Two tone injected high impact resistant plastic Highly polished underside Size (L x W x H): 64x8.5x15cm - M1; 62x10.2x7cm - XC11 Weight: 208g/7.32oz - M1; 215g/7.57oz - XC11 Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Luce R5 Saddle with MudguardFeaturing a high-quality IschialFlex cover construction, this women's road bike saddle is specifically designed with a profile for female cyclists and maintains its structural stability over time. Ideal for racing and endurance rides, this model is also equipped with a shell that's split into three sections for comfort and performance on long-distance rides. Its shell uses a carbon-reinforced nylon spine, which is co-injected with two very flexible, strong panels made from a thermoplastic elastomer (TPU). As a result, it offers fantastic strength, a low weight and flexibility, so you can transfer all of your leg power to your pedals.Women's Road Bike Saddle with Central Cut-outTo create a shape for women that's truly comfortable, this saddle is kitted out with a central cut-out that runs down its middle section. This central channel relieves pressure from your sit-bones and reduces fatigue, so you can enjoy consistent comfort even on longer rides. Another highlight is its S-alloy Mobius rail construction that's specially designed for a tough and reliable hold to your seatpost. Coming complete with an included mudguard and a design that's I.C.S ready for bags and lights, this is a great choice that's ready for adventures.Following Fizik's extensive research project, the brand undertook a revised construction for an ultimately comfortable, high-performing women's saddle, Luce. It has a wider sitting area shape, narrowing down towards the nose for better weight distribution and less friction on your thighs.Features: Cover Material: IschialFlex Shell Material: Carbon-reinforced Nylon Rails Material: S-Alloy with Mobius rail construction Use: Road Gender: Women's Size: 280x144mm Included: Mudguard I.C.S ready for bags and lights Central cut-out Weight: 238gManufacturer's Part Number: 70B3SWSA59D04 Black/Black Regular Standard 144mmBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Large Rear MudguardAvoid unwanted mud and spray with this Large Rear Mudguard from Mudhugger. Designed for 29" and 27.5+ full-suspension bikes, this is the ideal essential when tackling off-road terrain. The rear fender braces are designed to be custom cut around cable stops/guides and other unique seat stays/swingarm shapes and features. Some frames have asymmetrical stays, like found on EVIL bikes, and may not fit or will require extensive customization to fit.Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seat post the Rear Mudhugger works well on all bikes, providing they have disc brakes.However, attaching the Hugger to the seat stays also overcomes all of the problems normally associated with rear mudguards. They do not move out of line, get in the way getting on or off the bike, do not foul rear suspension travel, and are robust enough to take the rough and tumble of modern trail riding demands.For those of you into your Down Hill, enduro or endurance racing, being able to get out in all weather conditions, train hard and remain comfortable for much longer will undoubtedly pay dividends at the start of the race season.Features:Kit Includes: Fender, zip ties and protective/non-slip heli tape.Compatibility: Ideal for all 29" and 27.5+ full-suspension bikesDimensions: Approx. 760mm longDimensions: Approx. 105mm wide at the widest partDimensions: Braces are approx. 160mm longBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Medium Rear MudguardProtect yourself from mud and spray with this rear mudguard from Mudhugger. Designed for 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degrees, this is a helpful option for protecting yourself from unwanted mud spray when tackling tough terrain. The Medium Rear Mudhugger is nearly identical to the Small Rear Fender, but 80mm longer. This longer version is ideal for most 27.5 full-suspension frames. And 29” hardtail bikes.If your bike has seat stay angles 28- 31 degrees then the Medium Rear Mudhugger is probably the best choice, this applies to the vast majority of bike designs. Think Cannondale, Whyte, Lapierre, Transition, Rose, Commencal, Calibre, Kona, GT, Canyon, Giant and Marin.The rear fender braces are designed to be custom cut around cable stops/guides and other unique seat stays/swingarm shapes and features. Some frames have asymmetrical stays, like found on EVIL bikes, and may not fit or will require extensive customization to fit.Kit includes fender, zip ties and protective/non-slip heli tape.Features:Ideal for most 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degreesApprox. 640mm longApprox. 100mm wide at the widest partBraces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Giga Mountain Bike Mudguard KitThis Giga Carbon Mud Guard Kit is for use with the 2021-2022 Giga Carbon Frame.Features: 1x FB-GUO-131 - Mud Guard 3x FB-GAN-048 - Mud Guard BoltBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus E-Sommet Shock Mudguard and Bolts (2018)This top-quality mudguard and bolt is specifically designed for use with your Vitus E-Sommet MTB.Features:This kit contains a replacement for the plastic mudguard which protects your shock from dirt and splash-backs coming from the rear wheel. Additionally, it includes a mounting screw for straight-forward installation.Features: Compatibility: Vitus E-Sommet Genuine Vitus replacement part Mounting screw includedBuy Vitus Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Wide Fixed Mudguard SetIdeal for gravel and adventure bikes that roll on wider tyres, LifeLine's Wide Mudguards are 50mm wide and are suitable for 38-47mm tyres. They feature a PET/aluminium construction that's extremely durable, resistant to corrosion and UV Light damage, while being held in place securely by robust and lightweight steel-wire stays.Low Profile and Durable ConstructionThese mudguards feature plastic scratch guards at the end for added durability and protection throughout use. Plus, their low-profile construction ensures you will not catch your foremost foot on the front guard when cornering. And, these guards are compatible with caliper and disc brakes and are supplied with full installation instructions and all mounting hardware.Please note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.Features: Lightweight Flexible Scratch guards provide additional durability UV and corrosion resistant All mounting hardware included Only compatible with frames and forks that feature mudguard mounts Compatible with calliper and disc brakes 50mm Wide (38-47mm tyres)Buy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard V2 Mini Front MudguardThe ProGuard V2 Mini Front Mudguard from RapidRacerProducts is a durable, stylish and low-profile front mudguard that's optimised for use with suspension forks. Plus, it's compatible with multiple wheel sizes with tyre sizes up to 3" tyres and feature integrated fork seal protectors. The ProGuard is an amazing new front mudguard from RapidRacerProducts that's designed for use with disc brake mountain bikes. Offering unmatched protection from mud and spray, it's perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. This guard is engineered specifically to increase tyre clearance, improve fit, and reduce mud clogging issues seen with this type of mudguard. Plus, this mini option offers a very compact design for all year-round protection and unmatched levels of protection for a guard of this size.The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of the highly polished mould and the special polypropylene mix, this unique mix has been specifically blended for: Cold Weather Strength High Impacts High Flexibility High DurabilityAs a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish. That said RapidRacerProducts have tested and can recommend the following chemicals to use: Silicone: Spray high quality silicone onto surface and very gently remove with a clean cloth to maintain a high gloss finish and to stop dirt and water from sticking. Bike Cleaner: Non caustic bike cleaners can be used on the ProGuard mudguard GT85/WD40/Solvents: Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike.Optimal Front Cover Protection The front has been made longer than some of the offerings out there as RapidRacerProducts see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Convenient and Durable Snap-Off Hole CoversRapidRacerProducts have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the cable tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including boost forks (except reverse arch), this allows you to customise your fit.Rear Flick Mud and Spray ProtectionThe rear flick is designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned.Stylish and Easy to Use Sticker Recess The recess down the centre is a nice easy reference to apply coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on the stickers is strong, although it's fair to say that no sticker is able to withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit. Suspension Fork Seal Shield RapidRacerProduct's widely acclaimed seal shield has made it to the proguard as a means of offering greater protection for your seals from high velocity mud and spray, the seal shield section also provides additional strength and rigidity to the rear reducing flex. Zip Ties Included for Simple and Secure Mounting Six cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring four leaving the other two for the fork brace (although more could be added if desired). Features: Dimensions: 386mm long Compatibility: Wheels: 26”, 27.5”, 29” Tyre Clearance: Up to a 3” Forks: All forks including Boost forks (except reverse arch) Fork Travel: Any travel Weight: 85g (without cable ties)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Ziptie Front Mudguard The Mudhugger Shorty EVO Ziptie is an easy to install mudguard/fender that's compatible with modern suspension forks. Ideal for downhill (DH), enduro and trail riding, this mudguard keeps trail spray and mud away from your face, so you can focus on the ride.The Shorty Mudhugger EVO Ziptie was designed with the help of DH World Cup and EWS racers. The Mudhugger Shorty EVO Ziptie is designed around the latest Fox 36 and 38's and RockShox Zeb to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. Features: Length: 400mm - Rear extension 265mm, front extension 105mm Weight: 100g, without fittings Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full-compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.