These guards are very easy to install and adjust, making protection from the elements simple. Whether in town or on meadow tracks – the SKS VELO 55 CROSS mudguards are the ideal companions. After initial assembly, the clip-on mudguards can be attached to almost any frame tubes without tools using the practical universal fastening. Durable and Stylish Mudguard Set U-stays equipped with an ESC safety system are also available as an option. Made of black high-performance impact-resistant plastic with an integrated SKS logo, the mudguards also visually enhance your bike. Please Note: SKS U-Stays are sold separately.
SKS Velo 55 Cross Mudguard SetWhether city or off-road, no matter where you travel, the SKS VELO mudguards are a reliable companion for you.Whether in town or on meadow tracks - the SKS VELO 55 CROSS mudguards are the ideal companions. After initial assembly, the clip-on mudguards can be attached to almost any frame tubes without tools using the practical universal fastening. Durable and Stylish Mudguard SetU-stays equipped with an ESC safety system are also available as an option. Made of black high-performance impact-resistant plastic with an integrated SKS logo, the mudguards also visually enhance your bike.Features: Made of high-performance impact-resistant plastic Rim: 28" Universal fastening without any tools after the initial assembly Optionally also with stay mounting clamps Ideal for all surfaces Made in Germany Weight: 232gPlease Note: SKS U-Stays are sold separately.Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed to help protect your shock, linkages and bearings from getting hammered by mud, dirt and water at high velocity from your back wheel. This helps to minimise cleaning post ride and maximise intervals between services. ProGuard rear's versatile design allows for easy fitment on a huge range of bikes43 snap-off top holes to fit straight braces between the seatstays, raised braces, or dropped braces including those with supporting strutsIndent to create 4mm of additional tyre clearance (also fits the large raised brace on the Merida e-bike)Side arms designed to fit conventional seatstays (that go to centre of wheel), and offset seatstays (raised up from centre of wheel)Recess to protect sticker allowing you to match the sticker on your ProGuard Front mudguardMade of the same thick Polypropylene material used on the ProGuard FrontSame matte textured finish with gloss highlights you see on the ProGuard Bolt On mudguardsZip ties are providedNew for 2023 the ProGuard Rear is now available in two lengths, Mini and Standard. The Mini is the original guard we ve had in the range for a couple of years. The Standard joins the range to offer an extended coverage option. The ProGuard Rear Standard offers an additional 83mm on the rear coverage and 140mm additional length at the front. The material at the front of the guard is made using a slightly thinner material so it can be trimmed to optimise the fit to your specific bike. All RRP mudguards are designed, manufactured and packed in the UK. They are manufactured from a carefully selected Polypropylene designed for durability and optimising the balance of flexibility and stability.
Unmatched protection from mud and spray from the RRP ProGuard V2. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyre clearance and reduces mud clogging unlike other mudguards of this style.Mini: Ideal for good all-year-round good protection that s more discreetStandard: Superb coverage and protectionMax: 21mm longer than standard at the front and 68mm longer at the rear. Offers the very best levels of protectionLonger front minimises high speed sprayFork brace indent allows for greater tyre clearanceSlots and holes for easy installation with cable ties (included) or Velcro straps (sold separately)Rear flick offers even more protection especially whilst corneringSeal protection increased with our acclaimed Seal Shield designCompatible with 26 , 27.5 and 29 forks (reverse arch not compatible) with tyres up to 3 Made with RRP s unique polypropylene mix which gives great flexibility, durability and strengthMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionDesigned, manufactured and packed in the UKMini: 100g, Standard: 119g, Max: 133g
Unmatched protection from mud and spray from the RRP ProGuard V2. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyre clearance and reduces mud clogging unlike other mudguards of this style.Mini: Ideal for good all-year-round good protection that s more discreetStandard: Superb coverage and protectionMax: 21mm longer than standard at the front and 68mm longer at the rear. Offers the very best levels of protectionLonger front minimises high speed sprayFork brace indent allows for greater tyre clearanceSlots and holes for easy installation with cable ties (included) or Velcro straps (sold separately)Rear flick offers even more protection especially whilst corneringSeal protection increased with our acclaimed Seal Shield designCompatible with 26 , 27.5 and 29 forks (reverse arch not compatible) with tyres up to 3 Made with RRP s unique polypropylene mix which gives great flexibility, durability and strengthMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionDesigned, manufactured and packed in the UKMini: 100g, Standard: 119g, Max: 133g
High-quality 2-component front mudguard for mounting on the fork of mountain and trekking bikes. The Shockblade is available in sizes 26”/27.5” and 28”/29”.The chuck cone disappears almost invisibly into the steerertube
A low cost, yet high quality mudguard, the SKS Commuter's full length design offers maximum protection in adverse weather conditions and is built to withstand years of punishment on a commuter bike.The 3.0mm twin-parallel stainless steel stays are lightweight, strong and provide secure support for the PET plastic guards. Fitting to any bicycle equipped with standard eyelets, the Secu-Clip system features an emergency breakaway function to prevent trapped objects causing spoke damage or locking the front wheel. Supplied fully assembled, the mudguards come complete with a full fitting kit, Allen key, braze on bolts and a snap-fit sliding bridge for the rear. With 3 width options they are suitable for road, hybrid and mountain bike tyre profiles.
The high-quality 2-component dirtboard for the rear wheel of mountain and trekking bikes. Whether you ride 26 27.5″ 28″ or 29″ we have the right X-BLADE for you in the range.Due to the quick-release mounting the dirtboard can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.”
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.
A low cost, yet high quality mudguard, the SKS Commuter's full length design offers maximum protection in adverse weather conditions and is built to withstand years of punishment on a commuter bike.The 3.0mm twin-parallel stainless steel stays are lightweight, strong and provide secure support for the PET plastic guards. Fitting to any bicycle equipped with standard eyelets, the Secu-Clip system features an emergency breakaway function to prevent trapped objects causing spoke damage or locking the front wheel. Supplied fully assembled, the mudguards come complete with a full fitting kit, Allen key, braze on bolts and a snap-fit sliding bridge for the rear. With 3 width options they are suitable for road, hybrid and mountain bike tyre profiles.
A low cost, yet high quality mudguard, the SKS Commuter's full length design offers maximum protection in adverse weather conditions and is built to withstand years of punishment on a commuter bike.The 3.0mm twin-parallel stainless steel stays are lightweight, strong and provide secure support for the PET plastic guards. Fitting to any bicycle equipped with standard eyelets, the Secu-Clip system features an emergency breakaway function to prevent trapped objects causing spoke damage or locking the front wheel. Supplied fully assembled, the mudguards come complete with a full fitting kit, Allen key, braze on bolts and a snap-fit sliding bridge for the rear. With 3 width options they are suitable for road, hybrid and mountain bike tyre profiles.
Sometimes, the Mucky Nutz Face Fender doesn't quite offer enough protection from mud flying from your front wheel. Enter the Mucky Nutz MudGuard which is designed for bigger, closer coverage, while retaining the sleek look and easy fitting of the legendary Face Fender.Designed to offer better coverage with elongated, 3D shape and recessed bridge area for more tyre clearanceWide upper arm profile protects fork seals and stanchions from dirt & mudCompatible with most suspension forks and 26 , 27.5 & 29 wheel sizes and tyres up to 3 Incredibly easy to fit with supplied Velcro rol, just like the original Face FenderShort Mudguard is 400mm long, Long MudGuard is 600mm for additional coverageAs Mucky Nutz' first entry in the 3D fender market, they wanted to ensure they got it right. The MudGuard has been designed as a fully functional and sharp-looking piece of kit, that keep and mud and spray out of your face, even in the worst conditions. The MudGuard is compatible with most suspension forks, including Boost axle-spacing models and is suitable for 26 , 27.5 & 29 wheels and up to 3 tyres. Safe to say it has the ever-changing industry wheel/tyre size standards under control then! The Guard itself features a forward lip to minimise spray, along with a sharp trailing edge to cut cloggy soil away from your tyre. Despire this and the closer fit, the recessed bridge area means you'll still have plenty of tyre clearance. The wide upper arm profile is also designed to keep mud and dirt away from your fork seals and stanchions, keeping them cleaner and prolonging intervals between services. The MudGuard fits in seconds with the supplied Velcro roll, just like the original Face Fender. Another trait it shares with the Face Fender is the multitude of fastening slots, giving you a wide range of adjustment for different forks, as well as as the possibility of using it as a rear mudguard on some full suspension bikes. With the Short version weighing just 75g, the MudGuard is also super light. Offering excellent coverage and a versatile fitting system, the Mucky Nutz MudGuard is a worthy addition to their range for when you need maximum protection from mud & spray in the worst conditions.