The Acid Mud Blocker from Cube is all you need to shred for miles in the muddiest conditions. It comes with a set of cable ties to keep the Mud Blocker firmly fixed in place even on super-rough terrain. The included transparent protection foils effectively protect the fork from scratches, while the integrated fork protection fends off mud to keep your fork clean and buttery-smooth. With a width of 87mm, the Mud Blocker fits most 26in, 27.5in and 29in mountain bike forks.Protects the face from front wheel sprayQuality plastic constructionFor 26", 27.5" and 29" tyresMaximum tyre width up to 2.6"Includes 6 cable tiesFork scratch protection foilsIntegrated fork spray protectionOptimised adjustment for maximum stabilityWeight: 107g Long / 89g ShortDimensions: Short (WxL) 87 x 340mm / Long (WxL) 87 x 405mm
The Fox Fork 36 and 38 Mud Guard is an optional mud guard designed specifically for the new 36 and 38 forks (2021 models only).Proprietary and sturdy 4-point direct-mount attachment.Sturdy 4-point attachmentGenuine OE parts
Motivating yourself to ride in the rain is hard enough but to do it without mudguards is even harder! Trying to get comfy on your saddle when your behind is soaking wet and covered in mud is almost impossible. The best way to prevent this is with a clip on fender and the Topeak Defender XC11 Rear Mudguard has all the features to keep you and your bike protected from the elements. Constructed from impact resistant plastic this fender is lightweight and attaches to your seat post in seconds thanks to the quick release mounting system. Unlike lots of rear fenders which stay in one position this one can be adjusted to an angle that suits you so you can guarantee you stay protected.
DeFender™ M2 has an ultra-secure quick release mounting system that easily adjusts from 25.4 to 34.9mm easily fitting standard and oversized seatposts. The two-pivot arm articulates for improved tyre coverage and perfect bike fit. A stiff engineering grade plastic support frame is co-moulded to a softer more flexible material at the trailing edge for greater durability.
Mudhugger Shorty EVO Ziptie Front Mudguard The Mudhugger Shorty EVO Ziptie is an easy to install mudguard/fender that's compatible with modern suspension forks. Ideal for downhill (DH), enduro and trail riding, this mudguard keeps trail spray and mud away from your face, so you can focus on the ride.The Shorty Mudhugger EVO Ziptie was designed with the help of DH World Cup and EWS racers. The Mudhugger Shorty EVO Ziptie is designed around the latest Fox 36 and 38's and RockShox Zeb to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. Features: Length: 400mm - Rear extension 265mm, front extension 105mm Weight: 100g, without fittings Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full-compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Defender Mudguard Set (M1 & M2)Keep yourself protected from dirt and mud spray when tackling tough terrain thanks to the Defender Mudguard Set. Including the M1 & M2 Defender models, both integrate seamlessly with your bike and are incredibly lightweight at only 190g for the M1 and 230g for the M2, so you don't have to worry about them weighing you down. The M1 is compatible with standard front forks including reverse arch designs and its quick release fork attachment fixes the M1 easily onto your bike. DeFender™ M2 has an ultra-secure quick release mounting system that easily adjusts from 25.4 to 34.9mm easily fitting standard and oversized seatposts. The two-pivot arm articulates for improved tyre coverage and perfect bike fit. A stiff engineering grade plastic support frame is co-moulded to a softer more flexible material at the trailing edge for greater durability.Features:Rear angle adjustableMaterial: Two Tone injected nylonAttachment (Front): Quick Release Fork attachment fits diameter 19.6 – 26mmAttachment (Rear): Slip join clamp fits diameter 25.4 – 34.9mm seatpostSize: 60 x 10 x 12cm (M1), 40 x 10 x 12cm (M2)Weight: 190g (M1), 230g (M2)Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
SKS Velo 65 Mountain Mudguard Set Whether city or off-road, no matter where you travel, the SKS VELO mudguards are a reliable companion for you. Extra features are their sporty look and a very quick slide-on and off attachment.For more stiffness optional stainless clip-in U-stay. Features: Rim: 26'' Colour: black Weight: 263g Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Optional mud guard designed specifically for the new 36 and 38 (2021 models only).,Proprietary and sturdy 4-point direct-mount attachment..
The Crud XL Fender Mudguard is guaranteed not to clog up and disrupt your ride and will stay in place on even the roughest rides.Fits all front suspension forksFits in seconds and no tools neededGuaranteed no cloggingFor disc forks onlyAdjustable heightThe XL Fender can be fitted in seconds and doesn t require any tools. If fits all front suspension forks with disc brakes and the height can be adjusted too. Its guaranteed not to get clogged up with mud and will stay in place on the roughest of rides.
Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning.
Topeak Defender FX/RX Mudguard SetThe DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning.Features:Highly polished underside Quick Release Seat Tube Attachment & Front Fork Attachment Lightweight & Durable Rear Angle AdjustableMaterial: Injected Molded High Impact Resistant Plastic Weight: 180g/6.33oz - FX, 200g/7.04oz - RX Size:58.4 x 8.9 x 16cm/23” x 3.5” x 6.3” - FX, 55.9 x 10.2 x 15.2cm/22” x 4.0” x 6.0” - RX Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Defender M1 is compatable with all standard front forks including reverse arch designs. The unique quick release attachment system integrates the M1 seamlessly with the front of your bike.A stiff engineering grade plastic support frame is co-moulded to a softer and more flexible material at the trailing edge for greater durability. •Two-tone injection-moulded nylon construction.•Quick release .•Lightweight: 190g .