RapidRacerProducts ProGuard Rear MudguardSuper-protective against the mud, muck and spray of the enduro run, this rear mudguard does all it can to keep you clean on every ride. Dotted with 43 snap-off top holes to fit straight braces between the seat stays and an optimised indent which increases tyre clearance by 4mm, it is the ideal mudguard for a variety of wheels. Made from a durable polypropylene, it protects your rear suspension as well as the rest of your back end, making it a perfect choice for the daring downhill rider.Features:Material: Polypropylene with gloss finishProtection: Seal ShieldWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3"Length: 352mmWeight: 64gBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Front MudguardThe Nukeproof HZN mudguard is designed to be used on your forks to help prevent water, mud and grime from spraying on to your face. This mudguard is compatible with boost and non-boost models while also being ideal for use with forks up to 200mm travel. There are two different-height mounting hole points on the side of the guard, so you can tailor its fit on your bike. Plus, the front of the guard features a nose, which sits snug against your fork leg to ensure the most secure fit.Click here to view how to fit your Horizon Mudguard.Features: Prevents water, mud and grime spray Compatible with Boost and Non-boost forks Two mounting heights Includes 4x cable ties for installation Provides a secure fit for maximum protectionBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Wide Fixed Mudguard SetIdeal for gravel and adventure bikes that roll on wider tyres, LifeLine's Wide Mudguards are 50mm wide and are suitable for 38-47mm tyres. They feature a PET/aluminium construction that's extremely durable, resistant to corrosion and UV Light damage, while being held in place securely by robust and lightweight steel-wire stays.Low Profile and Durable ConstructionThese mudguards feature plastic scratch guards at the end for added durability and protection throughout use. Plus, their low-profile construction ensures you will not catch your foremost foot on the front guard when cornering. And, these guards are compatible with caliper and disc brakes and are supplied with full installation instructions and all mounting hardware.Please note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.Features: Lightweight Flexible Scratch guards provide additional durability UV and corrosion resistant All mounting hardware included Only compatible with frames and forks that feature mudguard mounts Compatible with calliper and disc brakes 50mm Wide (38-47mm tyres)Buy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Bolt On Front MudguardThe Bolt On Front Mudguard from RapidRacerProducts is a direct-mount mudguard that holds in place without the need for velcro or zip-ties and is compatible with all main suspension fork designs. What's more, it offers exceptional protection from unwanted spray when hitting the trails. Perfect Mudguards for Enduro, Downhill and Trail RidingThis mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight.Superb Protection from Mud and SprayOffering high protection with a superbly reliable construction, this mudguard is available in two sizes that are suited to all riding styles and weather and terrain situations. The Standard offers optimum levels of protection from mud and spray, whereas the Mini provides good protection in a low-profile and more discreet package. Plus, their wide design and longer rear with its flick section ensure spray protection even when cornering hard and when in the air. These guards also feature a Seal Shield to protect your fork seals by keeping dirt away from this area. This means your forks perform better for longer and will not require servicing as often, so you can spend more time on the trails and less time in the workshop.Features:Material: RapidRacerProducts unique polypropylene mix which gives great flexibility, durability and strengthEasy to install or remove with no zip ties or Velcro strapsHeight adjustability by 6mm and angle adjustability for a better fit if needed via 2 tilt brackets supplied2 Thick rubber pads on the sides protect your forksMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionLong front to protect from high-speed mud and spraySmaller turn down at the front for better tyre clearance and to reduce mud blockagesLong rear with flick design offers more protection especially during corneringSeal Shield increases protection and extends fork service intervalsWheel Compatibility: 26” 27.5” 29”Tyre Compatibility: up to a 3” tyreWeight: Standard: 130g; Mini: 104gFork Compatibility:FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket)New Marzocchi forks (using the FOX chassis)Ohlin's forksSR Suntour (models with unthreaded straight through the hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON Click Here)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Bolt On Front MudguardThe Bolt On Front Mudguard from RapidRacerProducts is a direct-mount mudguard that holds in place without the need for velcro or zip-ties and is compatible with all main suspension fork designs. What's more, it offers exceptional protection from unwanted spray when hitting the trails. Perfect Mudguards for Enduro, Downhill and Trail RidingThis mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight.Superb Protection from Mud and SprayOffering high protection with a superbly reliable construction, this mudguard is available in two sizes that are suited to all riding styles and weather and terrain situations. The Standard offers optimum levels of protection from mud and spray, whereas the Mini provides good protection in a low-profile and more discreet package. Plus, their wide design and longer rear with its flick section ensure spray protection even when cornering hard and when in the air. These guards also feature a Seal Shield to protect your fork seals by keeping dirt away from this area. This means your forks perform better for longer and will not require servicing as often, so you can spend more time on the trails and less time in the workshop.Features:Material: RapidRacerProducts unique polypropylene mix which gives great flexibility, durability and strengthEasy to install or remove with no zip ties or Velcro strapsHeight adjustability by 6mm and angle adjustability for a better fit if needed via 2 tilt brackets supplied2 Thick rubber pads on the sides protect your forksMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionLong front to protect from high-speed mud and spraySmaller turn down at the front for better tyre clearance and to reduce mud blockagesLong rear with flick design offers more protection especially during corneringSeal Shield increases protection and extends fork service intervalsWheel Compatibility: 26” 27.5” 29”Tyre Compatibility: up to a 3” tyreWeight: Standard: 130g; Mini: 104gFork Compatibility:FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket)New Marzocchi forks (using the FOX chassis)Ohlin's forksSR Suntour (models with unthreaded straight through the hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON Click Here)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Front Mudguard ExtenderThis mudguard extender is engineered to be easy to fit and can be removed when not required. It uses plastic pop rivets to attach and no drilling is needed with the Mudhugger FRX or ShortyX. This front extender makes the back of your Hugger 105mm longer. Features: Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed Weight approx 16gBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Small Rear MudguardKeeping your rear protected from mud, spray and debris, this mudguard is perfect for 26" hardtail and full suspension bikes as well as most 27.5" wheels on hardtail bikes. This makes it a quick fix for riders who want to upgrade their protection for tackling challenging terrain.Set Includes:FenderZip ties Protective/non-slip tape and instructionsFeatures:Part Number: MMU03Dimensions: Approx. 560mm long, approx. 100mm wide at the widest part, Braces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderWheel Size: Ideal for 26" hardtail and full suspension bikes and most 27.5" wheels on hardtail bikesWeight: Approx. 208g excluding fittingsBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Rear Gravel Hugger MudguardIdeal for gravel riding, wet weather cycling for blasting down muddy routes, the MudHugger Rear Gravel Hugger protects your back from rear wheel spray, gravel and grit.Secure, Strong and LightweightThe Rear GravelHugger is designed to be attached to the bike with zipties as these afford the most secure way to fitting. See fitting vid below, fitting the new GH is the same as the tried and tested MTB Rear Mudhugger. Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays (with angles approx 40-55 degrees) and designed for tyres up to 50mm wide. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, ensure you use this tape, invisframe, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Weight: approx 150gBuy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
MudHugger Front Gravel Hugger MudguardThe Front Gravel Hugger is a gravel bike-specific mudguard that protects you from trail debris flicking up, water splashing over you and anything else your tyres may kick up towards you. Wide Gravel Bike MudguardFollowing the tried and tested tyre hugging design of the MTB Mudhuggers, the GravelHugger is designed to fit most fork, wheel and tyre (up to 50mm wide) combos for your gravel bikes. To reduce single-use plastic waste and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be used if you'd prefer to fit the guard and leave on your bike at all times. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Fork Compatibility: Suits all solid 650b and 700c forks Includes O rings for non-permanent installation Weight: 150g (approx)Buy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.