The Ekar bottom bracket is designed specifically for gravel and all-road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. Oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness
The Ekar bottom bracket is designed specifically for gravel and all-road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. Oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology: ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness
This item is a front disc mount adapter and bolts for use with the new Campagnolo Ekar Calipers.
A drivetrain – in fact, a bike – is nothing without a chain to make it all work. And in Campagnolo’s ground-up design of the 1x13 Ekar drivetrain, they kept that fundamental component front and centre of their focus. They knew it had to be a vital element in operating effectively and reliably in the toughest environments gravel and all-road riding can throw at you. The new Nickel-Teflon treated C13 chain is designed specifically to work efficiently and securely with a narrow-wide 13- sprocket system. Despite being Campagnolo’s narrowest ever chain, it's also strong, light, durable and amazingly efficient. Technology: Narrow profile: lightweight, strong & efficient 1x13 Ekar profile: designed to interface perfectly with the Ekar Wide-narrow teeth design on the Ekar chainset Construction with different grades of steel & coatings: to create strong and durable links Unique ultrasound bath lubrication impregnation system: for long-life efficiency Includes Campagnolo C-Link for easier maintenance
Campagnolo’s considerations behind the available gearing ratios smooth shifting are fundamental to the design of Ekar’s gravel and all-road specific cassettes. 13 sprockets make the logic of a Road 1 x system possible. And it’s the introduction of the 9-tooth cog that makes Ekar work so perfectly for gravel and all-road riding. Not only is a wide range of gear ratios possible, but natural, progressive cadence-matching shifts are maintained, offering a uniquely satisfying ride. The range of gears offered by these cassettes matches or exceed any 2x system with no wastage. Closer low gear spacing for smooth cadence progression is matched with wider high gear spacing for top-end speed on a 1x13 system. Technology: 13 speed: full gear range to match or exceed any 2x system with no wastage 2-piece block: blends the strength of steel and the lightweight of alloy Compact: narrow design with quick changes, lightweight and improved chain security
The Ekar rear derailleur’s all-new 1x13 speed specific design has been created especially for gravel and all-road. The combination of more than 70 moving parts lovingly crafted in carbon fibre, techno polymers and anodised alloys, with stainless steel bolts - exceed the demands of gravel and all-road riding. This unique combination of materials creates a derailleur which is lightweight, strong and durable for the rigours of this category of riding. It is able to combine quick, precise and reliable shifting with high chain security and toughness. The Ekar groupset has been designed for short evenly spaced shifts between gears and the 2D parallelogram trajectory of the derailleur allows for precise mechanical movement between the 13 sprockets. You can maintain your cadence, whatever terrain you are riding. Technologies: Revolutionary Clutch Lock design: for swift and easy wheel removal 2D parallelogram trajectory: for precise shifting 12T upper and 14T lower jockey wheels, both constructed in high-grade polymer: for smooth chain running and secure retention.
The Ekar bottom bracket is designed specifically for gravel and all-road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. Oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology: ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness
Ekar’s rotors are strong 1.85mm thick stainless tempered steel. They are designed to stay straight and true, long-term, even under heavy and sustained braking. Available in 140 and 160mm diameters to suit your riding style or for an additional weight saving potential. Technology: Tempered stainless steel construction: strong, light and resistant to corrosion Stainless steel central spider
This item is a front disc mount adapter and bolts for use with the new Campagnolo Ekar Calipers.
For the gravel and all-road focused Ekar groupset, Campagnolo has taken the best of its classic controls technology and adapted it for this riding category. Comfortable and ergonomic levers and hoods, with an easily adjusted reach, this Campagnolo Ekar shifter gives you precise, quick shifting and positive engagement – every time, at every speed, on every surface. The updated thumb lever design of the Campagnolo Ekar hydraulic disc brake offers easy gear changes from any handlebar position and Campagnolo’s signature 3-gear up-shift. Ekar brakes feature tired and tested modulation and progressive feel, they are perfect for gravel and all-road control, whatever your riding style and whatever conditions you face. Paired with Ekar's Ergopower Controls, Campagnolo shared the best technology of its high-performance hydraulic systems internals for the Ekar brakes and fine-tuned them for gravel and all-road riding. This Ekar Right Ergo Lever and Caliper is a fully assembled and pre-bled hydraulic disc brake and 1x13-Speed rear shifter. Please Note: This disc brake is compatible with 140mm rotors. If you would like to use 160mm rotors, then you will need to use the Disc mount adaptor kit CPS993A/B (available separately). Technologies: One-Lever-One Action: One-Lever-One Action: for precise, quick shifting and positive engagement every time Vari-Cushion Hoods: comfortable safe grip with a surface that’s easy to keep clean New thumb lever: easy to activate from any handlebar position including the drops Enhanced Grip: additional laser etched texture on the lever blades and controls, for sweat and water resistance Ergonomic adjustable-reach: to suit any hand or finger size DB310 pads: unique organic compound, for high braking performance and improved wear resistance in wet or dry conditions. Highest Level Tech: same technology as Campagnolo’s Super Record hydraulic calipers, adapted for gravel and all-road riding
For its gravel & all-road focused Ekar groupset, Campagnolo has taken the best of their classic controls technology and adapted it for this riding category. Comfortable and ergonomic levers and hoods, with an easily adjusted reach, give you precise, quick shifting and positive engagement – every time, at every speed, on every surface. This Ekar Left Ergo Lever and Caliper is a hydraulic disc brake only - the 13-Speed shifter is part of the Right Hand Side lever and caliper setup. Ekar brakes feature tried and tested modulation and progressive feel, they are perfect for gravel and all-road control, whatever your riding style and whatever conditions you face. Paired with Ekar's Ergopower Controls, Campagnolo shared the best technology of their high-performance hydraulic systems internals for the Ekar brakes and fine-tuned them for gravel and all-road riding. Please note: This disc brake is compatible with 140mm rotors. If you would like to use 160mm rotors, then you will need to use the Disc mount adaptor kit CPS993A/B (available separately). Additional Features: One-Lever-One Action: for precise and dependable braking performance Vari-Cushion Hoods: comfortable safe grip with a surface that’s easy to keep clean New lever: easy to activate from any handlebar position including the drops Enhanced Grip: additional laser etched texture on the lever blades and controls, for sweat and water resistance Ergonomic adjustable-reach: to suit any hand or finger size DB310 pads: unique organic compound, for high braking performance and improved wear resistance in wet or dry conditions. Highest Level Tech: same technology as Campagnolo’s Super Record hydraulic calipers, adapted for gravel and all-road riding
The Ekar bottom bracket is designed specifically for gravel and all road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. Oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology: ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness
The Ekar bottom bracket is designed specifically for gravel and all-road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. The oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology: ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness
The Ekar bottom bracket is designed specifically for gravel and all road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. Oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology: ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness Specification: Designed specifically for Ekar 1x13 groupsets Suitable for Gravel and All-Road riding Full compatibility with all Road BBRight Press-Fit systems Weight: 50g
The Ekar bottom bracket is designed specifically for gravel and all road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. Oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology: ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness
High-quality Campagnolo Pins for use with Campagnolo Ultra-Link systems.
Designed to maximise performance on your road bike and achieve total balance, this wheelset features two unidirectional high-strength carbon fibre rims for a fantastic strength to weight ratio on your ride. Combining all the best of Campagnolo technology with its in-house carbon manufacturing, this model offers excellent stiffness and durability, while its impressively lightweight build ensures faster rolling, higher reactivity and superior handling. Coming equipped with disc brake compatibility, riders will enjoy powerful and consistent braking when both training and racing. Thanks to its 2-Way Fit and Aero Mo-Mag technologies as well as 360° improvements, it's fully kitted out for the demands of modern road cycling. Carbon Road Bike Wheelset with 2-Way Fit Technology Whether you're training or competing in an event, marginal gains make a huge difference. Campagnolo has kitted out this wheelset with 2-way Fit technology, which uses its exclusive rim profile to allow riders to fit both a tubeless tyre or a classic clincher. This flexibility means that you can personally test which of the solutions works best or simply use the clincher for training and the tubeless tyre for the day of the race. As a result, riders will enjoy tubeless benefits such as the ability to run lower pressures for increased grip, comfort and fewer chances of flats or punctures. AFS Disc Brake Compatible and Aero Mo-Mag Technology Engineered for the demands of modern road cycling, this wheelset features updated technologies relating to a completely revised manufacturing process for incomparable performance, look, resistance, dimensional precision and the ultimate tyre safe installation and functional matching. Giving riders full control over their performance, this model is equipped with AFS disc brake compatibility for powerful and consistent braking operation wherever their next ride takes them. Another highlight is its self-lock Aero Mo-Mag technology that provides perfect alignment between the spokes and nipples. This not only makes maintenance easier but also reduces stress and boosts longevity. Coming complete with high-quality CULT ceramic bearings and stunning Dark Copper Shaded graphics, the Campagnolo Bora WTO 45 Disc Road Wheelset is designed and researched for the perfect racing machine. Additional Item Top Features: Campy Profile: 2-way fit (tubeless with no tape) Tyre Compatibility: Tubeless, tubeless-ready, clincher Tyre Dimensions: From 23mm up to 33mm, aerodynamically optimised for 25mm Hubs: Front: Carbon; Rear: Aluminium Alloy Bearings: CULT ceramic Spoke Type: Aero elliptical section, straight pull, 1.5 double butted Spoke Count: 24 Spoke Pattern: G3 pattern Nipples: Aluminium alloy, self-lock, internal, Aero Mo-Mag system Braking System: Disc AFS ASTM Category: 1 Discipline: Road aero/performance Graphics: DCS (Dark, Copper Shaded) Technologies: 2-Way Fit: 2-way Fit technology is the profile that makes it possible to fit both a tubeless tyre or a classic clincher. With 2-Way Fit, Campagnolo customers will be able to personally test which of the two solutions suits them best or use the clincher for training and the tubeless tyre for the day of the race. With no doubt, tubeless tyres are the future of road cycling. Apart from greater comfort, the advantages are many: using a tubeless tyre you can exploit the greater smoothness due to the absence of friction between the tyre and the tube. There are no risks of sudden deflation when a tubeless tyre is punctured, a great advantage in safety terms. The lack of tubes eliminates puncture risks. And what if the tubeless tyre has a puncture? The Campagnolo 2-Way Fit system allows you to use a traditional inner tube by simply removing the hermetic closure valve to ride home with no problem. CULT Bearings: Ceramic Ultimate Level Technology (CULT) is the combination of the highest quality ceramic ball bearings and stainless-steel races available on the market, in other words, the technological excellence that makes Campagnolo brand products stand out. Ceramic ball bearings make it possible to reduce friction to the minimum and maintain consistent performance over time. Bearing races in stainless steel, with thermochemical surface treatment, make the sliding surface of the bearings on which the ceramic balls rotate, extremely hard and resistant to wear. This Campagnolo solution, covered by specific patents, reduces wheel and crankset friction to a minimum, thanks to two characteristics that only CULT technology offers: the lubrication system, just a film of oil instead of the usual grease, and a structure that is totally impervious to dirt, so much so that Campagnolo components using CULT technology have no need for dust protectors. The result? The smoothest, longest-lasting ball bearings on the market! Try them! G3 Pattern: Campagnolo has developed an assembly architecture that, compared with a traditional wheel, makes it possible to improve energy transfer, reduce the stress on the spokes on the right and increase transverse rigidity. This is achieved because in G3 geometry the right-hand side of the rear wheel is fitted with twice as many spokes as the left. The results of G3 system are truly extraordinary: better transfer of the driving torque, better lateral rigidity, reduction of the stress in the rear wheel spokes. And thanks to the G3 system that compensates for the forces acting on the two sides of the wheel, there are no more wheel vibrations, even for heavier people. Manufacturer's Part Numbers: CPW5220DA Brown Dark Copper Shaded 700c Shimano/SRAM CPW5220D Brown Dark Copper Shaded 700c Campagnolo CPW5220DB Brown Dark Copper Shaded 700c SRAM XD Sram XDR
Designed for pure speed, this road bike wheelset features two unidirectional high-strength carbon fibre rims that deliver fantastic stiffness and strength combined with all the best of Campagnolo technology. A wheelset that can transform the output of the most powerful riders into victories, it tips the scale at only 1515g and thanks to its in-house carbon manufacturing it gives riders an exceptional strength to weight ratio when both training and racing. Coming equipped with a 60mm rim profile height, this model's deep design cuts through the wind and provides excellent aerodynamics. With disc brake compatibility and rim solutions including 2-Way Fit and Aero Mo-Mag technologies as well as 360° improvements, it offers a reduced weight, fast-rolling, higher reactivity, better handling alongside an updated finish with eye-catching graphics that really makes Ultra stand out from the crowd. Carbon Road Bike Wheelset with 2-Way Fit Technology Whether you're training or competing in an event, marginal gains make a huge difference. Campagnolo has kitted out this wheelset with 2-way Fit technology, which uses its exclusive rim profile to allow riders to fit both a tubeless tyre or a classic clincher. This flexibility means that you can personally test which of the solutions works best or simply use the clincher for training and the tubeless tyre for the day of the race. As a result, riders will enjoy tubeless benefits such as the ability to run lower pressures for increased grip, comfort and fewer chances of flats or punctures. AFS Disc Brake Compatible and Aero Mo-Mag Technology Engineered for the demands of modern road cycling, this wheelset features updated technologies relating to a completely revised manufacturing process for incomparable performance, look, resistance, dimensional precision and the ultimate tyre safe installation and functional matching. Giving riders full control over their performance, this model is equipped with AFS disc brake compatibility for powerful and consistent braking operation wherever their next ride takes them. Another highlight is its self-lock Aero Mo-Mag technology that provides perfect alignment between the spokes and nipples. This not only makes maintenance easier but also reduces stress and boosts longevity. Coming complete with high-quality CULT ceramic bearings and stunning Dark Copper Shaded graphics, the Campagnolo Bora WTO 60 Disc Road Wheelset is designed and researched for the perfect racing machine. Additional Item Top Features: Campy Profile: 2-way fit (tubeless with no tape) Tyre Compatibility: Tubeless, tubeless-ready, clincher Tyre Dimensions: From 23mm up to 33mm, aerodynamically optimised for 25mm Hubs: Front: Carbon; Rear: Aluminium Alloy Bearings: CULT ceramic Spoke Type: Aero elliptical section, straight pull, 1.5 double-butted Spoke Count: 24 Spoke Pattern: G3 pattern Nipples: Aluminium alloy, self-lock, internal, Aero Mo-Mag system Braking System: Disc AFS ASTM Category: 1 Discipline: Road aero/performance Graphics: DCS (Dark, Copper Shaded) Technologies: 2-Way Fit: 2-way Fit technology is the profile that makes it possible to fit both a tubeless tyre or a classic clincher. With 2-Way Fit, Campagnolo customers will be able to personally test which of the two solutions suits them best or use the clincher for training and the tubeless tyre for the day of the race. With no doubt, tubeless tyres are the future of road cycling. Apart from greater comfort, the advantages are many: using a tubeless tyre you can exploit the greater smoothness due to the absence of friction between the tyre and the tube. There are no risks of sudden deflation when a tubeless tyre is punctured, a great advantage in safety terms. The lack of tubes eliminates puncture risks. And what if the tubeless tyre has a puncture? The Campagnolo 2-Way Fit system allows you to use a traditional inner tube by simply removing the hermetic closure valve to ride home with no problem. CULT Bearings: Ceramic Ultimate Level Technology (CULT) is the combination of the highest quality ceramic ball bearings and stainless-steel races available on the market, in other words, the technological excellence that makes Campagnolo brand products stand out. Ceramic ball bearings make it possible to reduce friction to the minimum and maintain consistent performance over time. Bearing races in stainless steel, with thermochemical surface treatment, make the sliding surface of the bearings on which the ceramic balls rotate, extremely hard and resistant to wear. This Campagnolo solution, covered by specific patents, reduces wheel and crankset friction to a minimum, thanks to two characteristics that only CULT technology offers: the lubrication system, just a film of oil instead of the usual grease, and a structure that is totally impervious to dirt, so much so that Campagnolo components using CULT technology have no need for dust protectors. The result? The smoothest, longest-lasting ball bearings on the market! Try them! G3 Pattern: Campagnolo has developed an assembly architecture that, compared with a traditional wheel, makes it possible to improve energy transfer, reduce the stress on the spokes on the right and increase transverse rigidity. This is achieved because in G3 geometry the right-hand side of the rear wheel is fitted with twice as many spokes as the left. The results of G3 system are truly extraordinary: better transfer of the driving torque, better lateral rigidity, reduction of the stress in the rear wheel spokes. And thanks to the G3 system that compensates for the forces acting on the two sides of the wheel, there are no more wheel vibrations, even for heavier people. Manufacturer's Part Numbers: CPW5250DA Brown Dark Copper Shaded 700c Shimano/SRAM CPW5250D Brown Dark Copper Shaded 700c Campagnolo CPW5250DB Brown Dark Copper Shaded 700c SRAM XD Sram XDR
Developed for top-level road cycling performance, this wheelset is equipped with two unidirectional high-strength carbon fibre rims that deliver stiffer and stronger execution combined with all the best of Campagnolo technology. Classed as the very first WTO model that tips the scale below 1400g, its in-house carbon manufacturing gives riders an exceptional strength to weight ratio when both training and racing. With disc brake compatibility and rim solutions including 2-Way Fit and Aero Mo-Mag technologies as well as 360° improvements, this model provides a reduced weight, fast-rolling, higher reactivity, better handling alongside an updated finish with eye-catching graphics that really makes Ultra stand out from the crowd. Carbon Road Bike Wheelset with 2-Way Fit Technology Whether you're training or competing in an event, marginal gains make a huge difference. Campagnolo has kitted out this wheelset with 2-way Fit technology, which uses its exclusive rim profile to allow riders to fit both a tubeless tyre or a classic clincher. This flexibility means that you can personally test which of the solutions works best or simply use the clincher for training and the tubeless tyre for the day of the race. As a result, riders will enjoy tubeless benefits such as the ability to run lower pressures for increased grip, comfort and fewer chances of flats or punctures. AFS Disc Brake Compatible and Aero Mo-Mag Technology Engineered for the demands of modern road cycling, this wheelset features updated technologies relating to a completely revised manufacturing process for incomparable performance, look, resistance, dimensional precision and the ultimate tyre safe installation and functional matching. Giving riders full control over their performance, this model is equipped with AFS disc brake compatibility for powerful and consistent braking operation wherever their next ride takes them. Another highlight is its self-lock Aero Mo-Mag technology that provides perfect alignment between the spokes and nipples. This not only makes maintenance easier but also reduces stress and boosts longevity. Coming complete with high-quality CULT ceramic bearings and stunning Dark Copper Shaded graphics, the Campagnolo Bora WTO 33 Disc Road Wheelset is designed and researched for the perfect racing machine. Additional Item Top Features: Campy Profile: 2-way Fit (tubeless with no tape) Tyre Compatibility: Tubeless, tubeless-ready, clincher Tyre Dimensions: From 25mm up to 33mm, aerodynamically optimised for 25mm Hubs: Front: Carbon; Rear: Aluminium Alloy Bearings: CULT ceramic Spoke Type: Aero elliptical section, straight pull, 1.5 double butted Spoke Count: 24 Spoke Pattern: G3 pattern Nipples: Aluminium Alloy, self-lock, internal, Aero Mo-Mag system Braking System: Disc AFS ASTM Category: 1 Discipline: Road aero/performance Graphics: DCS (Dark, Copper Shaded) Technologies: 2-Way Fit: 2-way Fit technology is the profile that makes it possible to fit both a tubeless tyre or a classic clincher. With 2-Way Fit, Campagnolo customers will be able to personally test which of the two solutions suits them best or use the clincher for training and the tubeless tyre for the day of the race. With no doubt, tubeless tyres are the future of road cycling. Apart from greater comfort, the advantages are many: using a tubeless tyre you can exploit the greater smoothness due to the absence of friction between the tyre and the tube. There are no risks of sudden deflation when a tubeless tyre is punctured, a great advantage in safety terms. The lack of tubes eliminates puncture risks. And what if the tubeless tyre has a puncture? The Campagnolo 2-Way Fit system allows you to use a traditional inner tube by simply removing the hermetic closure valve to ride home with no problem. CULT Bearings: Ceramic Ultimate Level Technology (CULT) is the combination of the highest quality ceramic ball bearings and stainless-steel races available on the market, in other words, the technological excellence that makes Campagnolo brand products stand out. Ceramic ball bearings make it possible to reduce friction to the minimum and maintain consistent performance over time. Bearing races in stainless steel, with thermochemical surface treatment, make the sliding surface of the bearings on which the ceramic balls rotate, extremely hard and resistant to wear. This Campagnolo solution, covered by specific patents, reduces wheel and crankset friction to a minimum, thanks to two characteristics that only CULT technology offers: the lubrication system, just a film of oil instead of the usual grease, and a structure that is totally impervious to dirt, so much so that Campagnolo components using CULT technology have no need for dust protectors. The result? The smoothest, longest-lasting ball bearings on the market! Try them! G3 Pattern: Campagnolo has developed an assembly architecture that, compared with a traditional wheel, makes it possible to improve energy transfer, reduce the stress on the spokes on the right and increase transverse rigidity. This is achieved because in G3 geometry the right-hand side of the rear wheel is fitted with twice as many spokes as the left. The results of G3 system are truly extraordinary: better transfer of the driving torque, better lateral rigidity, reduction of the stress in the rear wheel spokes. And thanks to the G3 system that compensates for the forces acting on the two sides of the wheel, there are no more wheel vibrations, even for heavier people. Manufacturer's Part Numbers: CPW5240DA Brown Dark Copper Shaded 700c Shimano/SRAM CPW5240D Brown Dark Copper Shaded 700c Campagnolo CPW5240DB Brown Dark Copper Shaded 700c SRAM XD Sram XDR
A top choice for the podium-chasing time trial (TT) or triathlon racer, the Campagnolo Bora WTO 45 road bike wheels deliver excellent aerodynamic penetration from the streamlined design of their rims and hubs. Constructed from a responsive and rigid carbon layup, the 19mm width and vertically compliant 45mm depth ensure precise handling and efficient power transfer as you push yourself to your limits. Carbon Fibre Aerodynamic Road Wheels Equipped with Black Aluminium Monolithic hubs with USB ceramic cup and cone bearings, every rotation of the Campagnolo bora Bora WTO 45 DB wheels is super-smooth, giving you a consistent experience on every ride. Stunningly supportive to deal with the pressures and impacts of high-speed racing, the rear hub also comes with the choice of a Shimano, SRAM or Campagnolo freehub to suit your preferred drivetrain. Optimised for use with disc brakes to give unrivalled stopping power and control, this 2-Way Fit tubeless-ready wheelset sends you to silverware with speed and strength. Included: 35 mm tubeless valve 35 mm valve extender Bushing to reduce the size of the valve hole 2 levers in composite material for tyre removal User manual