This kit consists of all cable guide parts for the Substance steel frame. These parts fill the holes in the frame where your cables enter and exit the frame.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
Each kit includes all the bolts and washers required to successfully rebuild your chain guide.
Genuine replacement Vitus spare part for the carbon Vitus Rapide bike and frame.
This kit is a direct replacement for the guide found on the Vitus Rapide Carbon bike.
Genuine replacement Manitou spring spacer kit for Magnum suspension forks.
Whether you're shredding the MTB trails or clocking up the miles on your road bike, this shift cable housing is designed for maximum protection. It measures three metres in length, which gives you more than enough room to protect your shift cables.
This brake cable housing is ideal for use with both road bikes and mountain bikes as its liner is water-resistant. This makes it great for riders who enjoy braving the elements, without worrying about the rain ruining your gear.
Ideal for commutters or long distance riders the grips are 131.6mm wide and 41mm at there deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a deeper option, check out the Lifleline Deep Palm Comfort Ergo Grips.
Ideal for commutters or long distance riders the grips are 136mm wide and 51mm at their deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a shallower option, check out the Lifleline Shallow Palm Comfort Ergo Grips.
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privilege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU coating and feature a fully welded construction. The Adventure Top Tube Bag has a reinforced base and features a reflective Lifeline graphic. The easy pull zip and reflective puller helps with 'on the move' access. The zip garage provides added protection from the elements. The robust hypalon staps are sized to minimise 'on the bike' interference, but maximise the stability of the bag - wide strap mounting to the top tube and narrower strap for the head tube. A cable entry/ exit point at the head of the bag allows for on the go charging. We packed ours with a phone (Huawei P Smart 7.5cm x 16cm), a small bag of trail mix, keys, high5 gel and a bit of cash
LifeLine Professional Bar Tape is supplied with everything you need for a fresh feel and added ventilation on the flats and drops. The gel component helps absorb the shock transmitted from uneven road surfaces and distributes pressure more evenly across your hands. The set includes two 200cm rolls to accommodate longer bars, 2 strips for an even profile under the hoods and two custom LifeLine end plugs.
Brightness is key for daylight riding and the Lifeline Daylight Visible Rear Bike Light has a 38 chip COB LED providing a blaze of illumination. This coupled with a purposefully disruptive flash pattern make the Lifeline light a great partner on the road. With 7 modes to choose from the rider can balance the road and light conditions against the most appropriate illumination. The light is Micro USB Rechargeable taking 2 hours to achieve a full charge. The light can be post or helmet mounted and comes with both a post mount bracket (fits 19-32mm dia) and a velcro helmet strap. Burn times are as per below: High Beam (1.5HRs), Low Beam (4.5HRs), Flash 1 (20HRs), Flash 2 (5HRs), Flash 3 (7.5HRs), Flash 4 (15HRs), Daytime Flash (8HRs). Need to know how much battery is remaining? Simply double click on the light to show the remaining capacity. A constant light indicates 100-50% battery remaining, a slow flash indicates 49-25% and a fast flash tells you there's less than 24% battery remaining.
This drop handlebar features a tough aluminium construction, which makes it more than capable of withstanding all the abuse that comes with a long day out on the road. ZZYZX has also equipped this road-ready drop bar with comfortable modern geometry, which makes changing your riding position as easy as possible. This makes it a perfect choice of upgrade for riders who enjoy clocking up the miles with a durable handlebar keeping them in control.
The Park Tool carbon saw blade fits the Park Tool SAW-1 Hacksaw and most 12" hacksaws. The CSB-1 is a wider carbon fibre specific blade and is designed for use with the SG-8 Saw Guide. Please Note: Similar to a grinding stone, do not use this blade on aluminium.
Genuine Nukeproof replacement parts.
Whether you ride with gloves or without, you'll enjoy consistent and reliable grip in all conditions, plus their ultra-durable compound is durable enough to last through many seasons of abuse. The double lock rings ensure they stay in place, no matter how hard you're pushing yourself.
The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability. - 50mm (standard). - Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth. - Alternating lateral force to each chain link to actively retain links to the ring. - Less surface contact between chainring and chain creating minimal friction and maximum retention. - Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance. - Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRWR28 Black 28T 9/10/11 Speed CRMRWR30 Black 30T 9/10/11 Speed CRMRWR32 Black 32T 9/10/11 Speed CRMRWR34 Black 34T 9/10/11 Speed CRMRWR36 Black 36T 9/10/11 Speed
All compounds are rim friendly. All brake formulas are formulated and manufactured at Kool-Stop to ensure the highest quality.
In the Box 1 x Slow Release Energy Drink Blackcurrant (40g) 1 x Slow Release Energy Drink Lemon (40g) 1 x Energy Gel with Slow Release Carbs Blackcurrant (62g) 1 x Energy Gel with Slow Release Carbs Orange (62g) 1 x Slow Release Energy Bar Blueberry and Raspberry (40g) 1 x Slow Release Energy Bar Apricot (40g) During endurance exercise your body relies on carbohydrates for energy to help keep you going. We all want to avoid spiking blood sugar levels and the insulin response that comes with some sugar-containing products. That’s why HIGH5 have launched a new Slow Release Energy range, featuring gels, bars and powder drinks. This HIGH5 Slow Release Energy Pack gives you the chance to trial all of the new range, taste the great flavours and fuel your endurance sport. Each product in the range contains isomaltulose, a slowly-digested carbohydrate that provides you with a stable and sustained energy supply for longer lasting fuel during sport. Developed in collaboration with professional cycling team BORA – hansgrohe, the HIGH5 Slow Release Energy range has also been enhanced with a new electrolyte complex, which provides you with an invigorating hit of magnesium. Naturally sourced from seawater to help you balance your electrolytes, all of the HIGH5 Slow Release Energy products give you all the essentials so you can be at your best. Enjoy as part of a varied and balanced diet and a healthy lifestyle. Vitamin B6 and Magnesium contribute to normal energy-yielding metabolism. Magnesium contributes to electrolyte balance. Consumption of foods containing isomaltulose instead of other sugars induces a lower blood glucose rise after their consumption compared to sugar-containing foods. **Expiry Date: 31/08/2021**