The no-questions-asked replacement wheel set, simple and reliable, Available in 26, 27.5, 29Wheel-system approachAll components engineered together 21mm wide rim good in all conditions Straight pull spokesProven mechanismsSleeved rim: light and strong FTS-X freehub Compatibiity: 9/15 Front, 9x135 RearRimsJoint: sleevedDrilling: traditionalValve hole diameter: 8,5 mm with pop off reducerTyre: tubetypeInternal width: 21 mmETRTO size 27.5": 584x21CSpokesMaterial: steelShape: straight pull, roundNipples: steel, ABSCount: 24 front and rearLacing: front and rear crossed 2HubsFront and rear bodies: aluminumAxle material: front aluminum, rear steelSealed cartridge bearingsFreewheel: FTS-X steelVersionsColor: Black onlyDisc standard : 6 Bolts onlyCompatibilityFreewheel: Shimano/SramFront axle: convertible from 15mm thru axle to Quick Release with included adaptersDelivered withRim tapeUser guideRim profileCrossride 16Intended useASTM CATEGORY 3 : offroad with jumps less than 61cmFor a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedRecommended tyre sizes: 35 mm to 69 mm (1.4" to 2.7")FiltersCategory : Traildiameter : 650b/27.5"front axle: 15x100front axle: 9x100 (quick release)rear axle: 10x135 (quick release)rim width (internal): 21mmtubeless: noEfficiency & rigidityFTS-XQRMOur Crossride FTS-X uses a proven Mavic construction. And for 2016 it gets a completely new, sleeved rim that's wider and lighter for better comfort and control, to go with a proven FTS-X rear hub. The result is one of the best-value wheelsets on the market. Tested as a system Spokes are round, with 24 at the front and rear to offer stiffness and reliability. And like all Mavic wheels, they are straight pulled to be a true wheel system, with all components developed and tested together to ensure performance and reliability. Compatible and practical On the practical side, the front hub is compatible with 9mm and 15mm axles (adapters and QR delivered) and the rear hub can only fit a 9x135mm (QR) frame. Crossride FTS-X is available in 26", 27.5" and 29" without tires. However, our Crossride Quest 2.25 tire is available in all three diameters.Weight Front 27.5" 895Weight Pair 27.5" 1985Weight Rear 27.5" 1090
The no-questions-asked replacement wheel set, simple and reliable, Available in 26, 27.5, 29Wheel-system approachAll components engineered together 21mm wide rim good in all conditions Straight pull spokesProven mechanismsSleeved rim: light and strong FTS-X freehub Compatibiity: 9/15 Front, 9x135 RearRimsJoint: sleevedDrilling: traditionalValve hole diameter: 8,5 mm with pop off reducerTyre: tubetypeInternal width: 21 mmETRTO size 26": 559x21CSpokesMaterial: steelShape: straight pull, roundNipples: steel, ABSCount: 24 front and rearLacing: front and rear crossed 2HubsFront and rear bodies: aluminumAxle material: front aluminum, rear steelSealed cartridge bearingsFreewheel: FTS-X steelVersionsColor: Black onlyDisc standard : 6 Bolts onlyCompatibilityFreewheel: Shimano/SramFront axle: convertible from 15mm thru axle to Quick Release with included adaptersDelivered withRear QR adapters (Supplied with purchase of pair or rear wheel)Valve reducerRim tapeUser guideRim profileCrossride 16Intended useASTM CATEGORY 3 : offroad with jumps less than 61cmFor a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedRecommended tyre sizes: 35 mm to 69 mm (1.4" to 2.7")FiltersCategory : Traildiameter: 26"front axle: 15x100front axle: 9x100 (quick release)rear axle: 10x135 (quick release)rim width (internal): 21mmtubeless: noEfficiency & rigidityFTS-XQRMOur Crossride FTS-X uses a proven Mavic construction. And for 2016 it gets a completely new, sleeved rim that's wider and lighter for better comfort and control, to go with a proven FTS-X rear hub. The result is one of the best-value wheelsets on the market. Tested as a system Spokes are round, with 24 at the front and rear to offer stiffness and reliability. And like all Mavic wheels, they are straight pulled to be a true wheel system, with all components developed and tested together to ensure performance and reliability. Compatible and practical On the practical side, the front hub is compatible with 9mm and 15mm axles (adapters and QR delivered) and the rear hub can only fit a 9x135mm (QR) frame. Crossride FTS-X is available in 26", 27.5" and 29" without tires. However, our Crossride Quest 2.25 tire is available in all three diameters.Weight Front 26" 865Weight Pair 26" 1925Weight Rear 26" 1060
What happens when you pair a speed sensor with a #1 best-selling bike trainer? You get a combo that’s ready for any virtual – or non-virtual – training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Zwift, without a traditional smart trainer.Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid² trainer with our innovative clutch knob, connect to your indoor cycling app of choice via Bluetooth or ANT+ and voilà! - you’re ready to sweat.Product Features: Fluid resistance unit provides a quiet and consistent ride., Progressive resistance offers the widest resistance range and road-like feel., Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps., ANT+ USB and BlueGiga USB sold separately.,.In the box: Fluid² Smart Equipped Bike Trainer, Dual-band magnetless speed sensor,.Specifications: Noise level at 20 mph is super quiet 64-68 decibels., Large, individually precision-balanced flywheel allows for improved road-like feel., Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer., Eccentric leveling feet allow for easy adjustment on uneven surfaces., Comes on the foldable Classic frame with spring loaded, bolt-action lever., Precision-machined alloy roller reduces tire wear and slippage., Features clutch knob for perfect roller-to-tire tension each ride., 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire., This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm., Trainer tire recommended., Trainer is tested to the combined weight (rider and bike) of 300 lbs., Optional thru-axle adapter available for 142x12mm and 148x12mm bikes., Formerly branded as CycleOps Fluid² Smart Equipped.
The SRAM NX crankset delivers Eagle™ styling and performance to the newest addition to the Eagle™ ecosystem. Designed for SRAM's X-SYNC™2 chainrings, the NX crankset is engineered for complete chain control-each tooth's profile is precisely engineered to work quietly, efficiently and securely with the Eagle™ chain's inner and outer links. DUB™ technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability.Eagle™ technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents.Eagle™ is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle™ drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact.Key Features:6000 series forged aluminium arms,DUB™ technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible.,ISO 4210 compliant. See Declaration of Conformity for details.,Speeds: 11/12,BB Compatibility: DUB BSA MTB 100, DUB PF MTB 121, DUB BSA73, DUB PF89.5, DUB PF92, DUB PF30 MTB73, DUB BB30 MTB73,Chainring Size: 30, 32,Crank arm length: 165mm, 170mm, 175mm,Chainline: 49.0mm,BB Spindle Interface: DUB,Chainring material: Steel,Guard: No Guard,Bolt Circle Diameter (BCD): Direct Mount (DM),Crank arm material: Aluminium,Colour (Crank arm): Black.
Experience a better bike ride. SRAM Rival eTap AXS features the technology modern riders demand—intuitive wireless shifting, innovative gearing, integrated power measurement, AXS connectivity, and refined hydraulic disc brakes. It’s low on complexity, but rich with features.Designed to handle whatever you can throw at it. Polished aluminum crankarms in a wide range of lengths and the DUB bottom bracket system mean the Rival crankset will keep spinning, no matter what. A tight and consistent 13-tooth gap between chainrings makes for accurate and dependable shifting.• X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear• Crisp and accurate front shifts• DUB bottom bracket adds durability, simplicity • and virtually universal frame compatibility• Available in 48/35T and 46/33T configurations(BB not included)
Eagle™ Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains we’ve ever made. The radical new look and feel of our X-SYNC™ 2 Eagle™ chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC™ chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle™ chain to increase chain retention and overall pedalling efficiency, while decreasing friction, noise and wear.Key Features:Only Eagle™ drivetrains are system engineered to give every rider the ultimate 1x experience.,The complete Eagle™ system — crankset, chainring, chain, shifter, derailleur and cassette — is designed, tested and proven to deliver the ultimate mountain bike drivetrain.,Only Eagle™ offers the lightest, highest-performing, most durable system our engineers, professional athletes and customers asked for.,Only Eagle™ is capable of revolutionizing the ride for all riders on every kind of terrain.,Eagle™ technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents.,X-SYNC™ 2 chainring design increases chain retention, wear life, and reduces friction and noise.,Designed to be used with Eagle™ chain.Specifications:Chainring Size: 32,Bolt Circle Diameter (BCD): Direct Mount (DM),Speeds: 12,Material (Chainring): Aluminium,Colour (Chainring): Black.
The Hamax AMAZE combines top level safety and reliability with stylish colour combinations and updated, supremely comfortable padding. Your child can lean back, sit comfortably and enjoy the ride. It is ...amazing!Key features:• Extra thick padding• Reclining function (12.5 °)• Adjustable footrests• One-hand operated harness, buckle and footrests• Rear reflector for improved visibility• • Safe and simple to fit• Lockable fastening bracket with quick release system • Fits bikes with or without a luggage carrier• Lockable, spring-loaded fastening bracket• Green indicators on the bracket appear when the seat bars are correctly mounted• Fits frame diameters from 28-40 mm• Simple mounting – only four screws• For children above the age of approx. 9 months and weighing up to 22 kg
The Lake MX176 offers incredible performance, stability and all day comfort. Feature for feature no other shoe can be compared to the MX176 in the same category. Upper : Clarino Microfiber & mesh upper. The MX176 features form fitting and durable microfiber and mesh upper with a comfortable and secure BOA® closure. Outsole : Enduro Sole with Ice Lock anti-slip lug inserts. The rubber sole features ICE LOCK tread inserts, which are vertically injected micro glass fibers that grip virtually all surfaces. This gives you an all conditions cycling shoe that is sure footed and stable in any situation. Closure : Side mounted L6 BOA® Push/Pull lacing system with A power strap in the forefoot.
Shimano's flagship downhill/enduro flat pedal shoe with improved protection, comfort and pedal contactReinforced synthetic leather upper with mesh inserts provide protection and breathability,Lace closure with elastic securing strap for stress-free comfort,Integrated debris cuff and reinforced toe and heel protection to ensure rider safety,Reengineered last to cover wider range of foot shapes,ULTREAD™, Shimano's brand new proprietary outsole compound and pattern, developed for maximum grip and durability with a improved pattern to maximise arch contact and secure pin engagement,Weight: 385g (size 42),Stiffness rating: 5,,Reinforced synthetic leather upper with mesh inserts provide protection and breathability,Lace closure with elastic securing strap for stress-free comfort,Integrated debris cuff and reinforced toe and heel protection to ensure rider safety,Reengineered last to cover wider range of foot shapes,ULTREAD™, Shimano's brand new proprietary outsole compound and pattern, developed for maximum grip and durability with a improved pattern to maximise arch contact and secure pin engagement,Weight: 385g (size 42),Stiffness rating: 5.
Key Features:Thermoflex fabric for warmth and comfort,KISS Air2 Donna seat pad for long-distance comfort,Lie-flat waist elastic,Reflective band at bottom of leg.
The Look Keo Blade Carbon improves the performance and experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to the daily input from the greatest of champions. Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours.The Keo Blade Pedals are currently being used by 7 UCI World Tour Teams including Lotto-Soudal, Astana-Premier Tech and AG2R CITROEN LA MONDIALE and more. Lightweight, aerodynamic and powerful, this pedal provides the riders with an incredible platform to keep improving and optimizing performance on the road to victory.Key Features:Technology: Blade Carbon,Tention: 12 or 16 or 20,Body: Carbon,Spindle: Chromoly +,Platform Material: Stainless Steel/INOX,Platform Area: 700mm²,Platform Width: 67mm,Stack Height + Cleats: 14,8mm,Weight Pedal: 110g,Weight Pair + Cleat: 288g,.
Lightweight and RacyA sleek and stylish upgrade to the best mechanical caliper on the market. The BB7S stainless steel hardware and anodized finish make it right at home on any road-disc build.Avid BB7 - Road - S - Black Ano - 160mm HS1 Rotor (Front or Rear-Includes IS Brackets, Stainless CPS & Rotor Bolts)Compatible with Red, Force, Rival and Apex levers.Tech Spec : Weight : 197 grams, Caliper Only,Caliper Design : Mechanical, Forged 2-piece Aluminum,Finish : Black Anodized,Rotor : Centerline 140/160mm,Pad : Organic with Steel Backing Plates,Adjustment : Dual Knob Pad Adjustment, Tri-Align Caliper Positioning System,Intended Use : CX/TRK/URBAN/ROAD.TechnologiesTri-Align™ Caliper Positioning System™Another original Avid technology making your life better—there’s never been an easier brake to install and adjust. With Avid’s Tri-Align™Caliper Positioning System™, aligning the caliper to the rotor literally takes seconds. Just loosen the CPS™ bolts a little, and then squeeze the brake lever while re-tightening the bolts. Perfect caliper alignment—just like that.
The chain tool is fundamental to bicycle mechanics. As drivetrains push the envelope, however, chain tools must evolve to keep pace. The Pedro's Tutto Multi-Chain tool has done just that. The Tutto blends ergonomic, organic design and noticeable industrial stature with patented innovations like the Fit Dial and RPG and novel additions like the 11-Speed Peening Bit, ergonomic set-back handle design, and Guide Pin Sheer Slot you won't find on any other tool. These unique features make the Tutto the most versatile chain tool available, compatible with almost any chain from single speed to Campagnolo® 11 Speed. Lastly, the Tutto was designed with season after season of professional service in mind featuring heat-treated tool steel construction for the ultimate in strength and long-lasting performance, and simple disassembly to make servicing and part replacement a breeze, if its ever needed. Simply put, the Tutto may be the last chain tool you ever need. Backed by Pedro's lifetime warranty.Key Features:Fit Dial - The Fit Dial is used to adapt your Tutto Multi-Chain Tool to almost any modern chain. The Fit Dial wheel has 4 anvil features. Inspecting closely you will find that each anvil feature differs from the other in height or style. Each anvil is marked with a series of dots denoting which setting is in use. A Fit Dial usage guide is laser etched on the Tutto handle for easy reference. Each indexed setting is easily selected by rotating the Fit Dial..RPG - The RPG, or Retracting Pin Guide, is a multi-purpose feature found only on the Tutto Multi-Chain Tool. First, the spring loaded RPG supports the pin up to the face of the chain eliminating broken pins and ensuring perfect alignment every time. Second, for chains with guide pins like Shimano® or Campagnolo®, the RPG encloses the guide pin to prevent loss, bending or breakage, and ensuring perfect installation. Third, the RPG acceppts the 11-Speed Peening Bit required for installation of Campagnolo® 11-speed chains..11-Speed Peening Bit - The 11-Speed Peening Bit is handily stored in the base of the Tutto handle. This bit is used for Campagnolo® 11- speed chain installation which requires a peening operation during installation of the chain rivet. The bit is easily removed from the handle and fits onto the end of the RPG allowing installation of Campagnolo® 11- speed chains..Guide Pin Sheer Slot - For chains that use a guide pin for installation, the Guide Pin Sheer Slot provides an integrated tool to remove the guide section from installation pins. After pressing the master pin into the chain, simply insert the guide section into the sheer slot and rotate the tool up or down..
The funky, stripe-bedecked, printed Castelli Endurance Pro Jersey earns its endurance tag by offering comfort, sun protection, aerodynamic excellence and versatility, all in one multi-faceted garment.It is constructed from a mixture of 4 different fabrics that are stretchy enough to be form-fitting yet flexible and work together to keep you dry and fresh. Raw cut sleeve endings and a protective flap behind the YKK® Vislon® zipper further promote your comfort. The multifilament fabric at the back will block 94% of the sun’s rays as you lean over the handlebars, while the sleeves and shoulders feature the same speedy, highly aerodynamic fabrics used in Castelli’s pro-level race jerseys. Add in an exceptionally quick-drying front and the Endurance Pro Jersey has something to offer cyclists at any temperature. Finally, 3 easy-to-access drop pockets and a zippered pocket for storing keys or valuables make this jersey suitable for short training runs and weekend epics alike. It’s an all-rounder to pull on when you don’t know what challenges or conditions you’ll meet on your ride!Key Features:Eye-catching printed graphic,Fast- drying velocity dimpled fabric at front and shoulders,Fabric at back blocks 94% of UV rays,Air Mesh Sleeves with raw cut sleeve ends,Nervato fabric at armholes for improved aerodynamics,3 drop pockets and 1 zippered pocket,YKK® Vislon® zipper with neck protector,Weight: 147g (M).
The Aero Race 6.0 Jersey is Castelli’s most aero jersey to date. Engineered for aero efficiency at 30 to 55kmph it is designed for the fastest riding giving anyone a pro-level advantage.Castelli’s first aero race jersey debuted in 2006 and was called the Split Second. Back then, aero was only for TTs and performance clothing meant moisture management. Castelli changed this for good, and in the process transformed the appearance and apparel of the pro peloton.The Aero Race 6.0 is the sixth major revision of Castelli’s aero jersey. Each generation has become more aero and better fitting. The Aero Race 6.0 benefits heavily from Computer Fluid Dynamic research and input from Team Ineos who have tested the jersey in the crucible of pro racing.Velocity Rev2 fabric on the front and sleeves leads to exceptional aerodynamics, and a mesh rear provides ventilation. A YKK zipper allows smooth opening and closing, and a drop tail means perfect pocket placement and no riding up when pushing hard on the drops and on the rivet.Key Features:CFD-based fabric placement and seam construction,Engineered for aero efficiency at 30 to 55 km/h,Airflow shoulder construction,Velocity Rev2 fabric on front and sleeve,3D mesh back for breathability,Elbow-length stretch sleeves with a raw-cut edge,YKK® Vislon® zipper,Drop tail allows perfect pocket placement while keeping the jersey fitting well at the waist,Temperature comfort range of 18° – 32°C,Weight 119g (Large).
Key Features:Any Race Face Cinch™ System Crankset.,Compatible With Shimano 12-speed Hyperglide+ Chains.
Featuring more tunability than ever before, the Megneg air can provides an even larger negative volume giving you more mid-stroke support, a plusher initial feeling, and more bottom out force using less tokens. Go ahead and tune your shock exactly to your ride.Includes air can, tokens, seals & decals,Compatible with Deluxe and Super Deluxe shocks.
In collaboration with the Skydive Team the model RAZE was developed. True to the motto "Designed to perform", RAZE is a sophisticated pair of sports glasses for a wide range of sports. The aerodynamic design is the result of seamless lens construction - Seamless Lens Construction. The sporty shape keeps wind and drafts away from the eye. The polarized lenses prevent glare and ensure best vision even in strong sunlight. Rubberised contact points on the nose and temples guarantee extreme grip and comfort. Key Features: Material: Lens - Polycarbonate; Frame - TR90 , Red Bull SPECT Eyewear logo on the arm,Completely polarised polycarbonate lenses with 100% UV protection,Unisex .
From the playground to the racetrack, the Driftbrothers bring their passion for drifting to the world! Now they have a brand new project – Red Bull SPECT Eyewear X Driftbrothers: brand new signature sunglasses, designed by Elias and Joe. Combining precision, performance and style, the new DRIFT shades put you firmly in the driver’s seat.Whatever your day holds, make the most of the view in the Red Bull SPECT Eyewear Drift sunglasses. The classic rectangular frame in a fresh X'tal grey shade is lightweight but robust, while the polycarbonate lens delivers 100% UV protection. Meanwhile, Red Bull SPECT Eyewear branding on the arms completes the look. Key Features: Material: Lens - Polycarbonate, Red Bull SPECT Eyewear logo on the arm,Completely polarised polycarbonate lenses with 100% UV protection,Unisex .
The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space.With its 3 or 4-litre payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools and food supplies, while also helping to secure a low centre for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet.The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps.Specification:3L Pack:Fabric: PS21R,Height: 15cm,Width: 40cm,Depth: 6cm,Volume: 3L,Weight: 170g.4L Pack:Fabric: PS21R,Height: 13cm,Width: 50cm,Depth: 6cm,Volume: 4L,Weight: 170g.