The Wolf Tooth Direct Mount Flattop Chainring for SRAM Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with SRAM Cranks and 12-speed Flattop chains, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
For pro riders, the weather is no excuse. Sportful developed the Fiandre Pro Jacket to protect the pros when they’re heading out into foul weather. The same jacket is available to you for when getting out on the bike is a must, no matter how bad it is outside.Made from from Polartec® NeoShell® fabric the jacket is windproof and waterproof. It is also highly breathable, stretchy, and the jackets construction matches your position on the bike for ultimate comfort. When you’re preparing for the worst, only the best will do. Key Features Polartec® NeoShell® fabric is windproof, waterproof, and highly breathable ,Fully taped seams for waterproofing ,Waterproof YKK® zipper ,Reflective detailing on back ,3 rear pockets ,5°+ C ,Weight: 332g.
The Ridge Waterproof Jacket does it all thanks to the Pertex ™ 2.5 layer fabric with its waterproof, windproof and breathable features meaning you're covered when it comes to hitting the trails in the colder, wetter months. The durable water-repellent coating will keep out the rain whilst the highly breathable fabric and venting system will allow heat out when you want to let off steam. The handy adjustable hood is helmet compatible and there's also room for elbow protection too, whilst the jacket's relaxed styling will keep you looking good at all times on and off the bike.FEATURESPertex™ 2.5 layer waterproof, windproof, breathable fabric,Durable water repellant coating,Venting system to let hot air out,Adjustable helmet compatible hood,Elbow protection compatible,Elasticated cuff and cuff tab,Relaxed fit,100% Nylon Mini Ripstop.
Key Features:Tough genuine Shimano toolsHardened steel for longevity and durability.
Comfort and speed are two things that triathletes always seek. Being aerodynamic while ensuring ease of movement across triathlon disciplines is something the Castelli Free Tri 2 Sleeveless Top has been designed to do.The super-light Velocity Rev2 main body fabric ensures a great fit, while the sleeveless cut maximises your range of movement when it’s worn under a wetsuit or swimsuit and will help you to stay cool during your run. The SnapLock fastener works to anchor the top firmly to the Castelli Free Tri 2 Short, to maximise the speed of the ensemble in the water and on the bike. Once you start to run, it can be released for improved ventilation and greater ease of core rotation.You’ll particularly appreciate the highly breathable, cooling Velocity mesh fabric at the back that nonetheless blocks 94% of UV rays as you adopt ride position, at which point the GIRO³ flat gripper elastic will keep the bottom of the Free Tri 2 Sleeveless Top firmly in place.The two rear pockets lie flat, facilitating swimming speed by keeping water out, while offering enough room to store plenty of nutrition to perk you up during your ride or run and holding your gels still. When things really start to heat up on your run, you’ll be very glad of the YKK® Camlock® zipper that can be opened with just a tug of the shirt, though one click will ensure it stays firmly in place for the other segments.Key FeaturesOffers freedom of movement in the water, aerodynamics on the bike, comfort on the run,Front surface Velocity Rev2 fabric delivers aerodynamics, fit, moisture management,Back surface Velocity mesh is breathable yet blocks 94% of UV rays,Armholes constructed to lie flat and promote comfort,2 roomy but flat pockets,GIRO³ flat gripper elastic on lower back,SnapLock fastener clips into shorts during bike ride and cycle, unclips for run,YKK® Camlock® zipper for effortless opening, paired with total security,Weight: 85g (M).
Never lose a bottle again with these incredible Silca Sicuro anodised titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain.In Silca's quest to create the ultimate bottle cage, they found themselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets.Cleaning and care: Oils from your hands and fingers can change the anodized colour. To revive colour and/or clean the cages, use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodised finish. Please note, bolts are not included with the bottle cage.Key FeaturesSingle Cage,Rainbow anodized finish,Seamless 3-2.5 titanium tubing,30 g,21mm fore/aft adjustment,Hand bent in Indianapolis,Easy in-and-out,Extremely secure design,Laser welded,Optimized for purist bottles .
SHARPENED FOR SPEEDThe STYLO 6K crankset delivers consistent performance every time out. Featuring SRAMs X-SYNC™2 tooth profile chainring, the STYLO crankset is engineered for complete chain control. Each tooths thickness is precisely toleranced and controlled to work seamlessly with the SRAM chains inner and outer links. DUB™ technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability.THINGS TO REMEMBER• The STYLO 6K crankset is compatible with the SRAM 1x™ drivetrain systems • Featuring SRAM’s X-SYNC™2 tooth profile • The STYLO crankset is engineered for complete chain control • Most affordable aluminum X-SYNC™2 direct mount cranksetFEATURES AND BENEFITS• 6000 series forged aluminum arms • DUB™ technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible. • ISO 4210 compliant. See Declaration of Conformity for details SPECIFICATIONSSpeeds: 11/12BB Compatibility: DUB BSA73, DUB PF89.5, DUB PF92, DUB PF30 MTB73, DUB BB30 MTB73Chainring Size: 32Crank arm length: 170mm, 175mmChain line: 49.0mm, 52.0mmBB Spindle Interface: DUBChainring material: SteelGuard: No GuardBolt Circle Diameter (BCD): Direct Mount (DM)Crank arm material: AluminiumColour (Crank arm): Black
Comfort and speed are two things that triathletes always seek. The Castelli Free 2 Women’s Short Shorts share many of the aerodynamic features of the Castelli Free 2 Women's Tri Shorts, while ensuring even greater ease of movement, since they’re a few centimetres shorter in both the waist and legs.The speed comes from Instadry Speed fabric, which is naturally feather light, slow to absorb water, and cut to offer an anatomic fit that will support your muscles. Meanwhile, the back pocket is flat enough to let air and water stream past it freely, yet large enough to keep a gel close at hand for a timely energy boost.Comfort is achieved through flatlock seams that ensure the whole short is smooth and a pleasure to wear, along with the GIRO³ leg grippers that will hold the legs firmly but lightly in place as you push on the pedals or pound the ground. These shorts also feature the renowned KISS Tri seat pad, which offers ample cushioning to keep you feeling great on your bike, whether on race day or in training, but with minimal bulk, so that you’ll barely notice it’s there during the swim and run. After you’ve left the water, you’ll mount the bike ready to roll thanks to the pad’s extra fast drying foam.Key Features: Instradry Speed fabric sheds water ,Free construction and flat lock stitching results in a comfy anatomic fit,KISS Tri seat pad is slim but artfully padded for maximum cycling comfort ,Pocket at centre back for gel,GIRO³ leg gripper keeps legs lightly in place,Weight: 106g (S).
Now with two-tone graphics, our popular AEffect crankset is designed to handle aggressive trail riding at an XC crank weight and attractive pricepoint. Featuring the Cinch System with its interchangeable spider options, our trusted 24mm EXI interface spindle and additional 165mm length, AEffect is a rock solid crankset for today's modern XC and trail rider.Key Features:Black satin finish.,New 165mm length.,Alloy or Steel DM Ring.,CINCH removable spider interface.,Deep pocket net forged from 6066 AL to optimize stiffness..SpecificationColour: Black.,Built for: XC / Trail / Enduro / Fatbike.,Spindle size: 24mm - 5 lengths available.,Spiders: 2x 104/64MM BCD (Boost option available).,Cinch Direct Mount:,Alloy: 26T, 28T, 30T, 32T, 34T, 36T, 38T.,Steel: 28T, 30T, 32T.,.Weight: 650g (32T Alloy DM, W/O BB), 714g (32T Steel DM, W/O BB).,Size: 165, 170, 175..
The Sportful Fiandre Light NoRain Short Sleeve Jacket was developed for top-level performance in bad weather. Tested on the Flemish cobbles by highly experience cyclists and the pros.The Fiandre Light Jacket provides protection and resistance from the rain with Sportful’s NoRain Light fabric built into the back. NoRain allows moisture to escape while stopping rain from getting in, making a highly breathable and versatile jersey. A long back provides coverage from wheel spray and creates a comfortable fit. Short sleeves make it ideal for in between days. Perfect for racing in Belgium, and perfect for Britain’s inclement weather too.Key FeaturesStretch windproof fabric on front, shoulders and upper arms,NoRain Light fabric on back for water-repellent breathability and stretch,Unidirectional stretch back construction for pocket support,3 rear pockets,Long back for coverage and comfortable fit,Reflective detailing,10°+ C,Weight: 161g.
Perform at your best, even in the coldest conditions. The Fiandre Warm Jacket is made with GORE-TEX INFINIUM™ fabric to provide the right level of thermal protection on the most exposed areas, and a lighter, perforated back for breathability.Part of what makes the Warm Jacket so great is the attention to detail. Zippered openings on the front with easy-to-pull grips allow you to increase ventilation, even with gloves on. Raw-cut fabric on the cuffs reduce bulky seams and improve comfort. Reflective logos aid visibility in low light. Key Features Jacket in GORE-TEX INFINIUM™ fabric with a lighter, perforated back ,Raw-cut stretch fabric on cuffs ,YKK® WR front zip ,Zippered openings on chest for ventilation, with easy-grip zippers ,Reflective logos ,0°+ C.
The Goccia Jacket from Castelli is a pared back design that focuses on doing three things superbly: it is fully waterproof, the four-way stretch provides ultimate comfort regardless of body shape, and it provides an aerodynamic advantage even in the wet.At the core of the jacket is the Tempesta Stretch fabric, which gives the Goccia its rain protection and stretch fit, as well as making it durable and packable enough to fit in a jersey pocket. The fabric has a windproof PU membrane that provides 10,000mm waterproofness, as well as first-class breathability for warmer temperatures or when your body is working harder.Taped shoulder seams prevent water entering the jacket at one of the most exposed points, and a covered YKK® Vislon® zipper stops water getting in on the front. An extended tail provides protection from wheel spray.Designed to be worn over a jersey, the shell jacket has foregone rear pockets to keep the construction simple and reduce seams. The other upside of the minimal design is it looks great on and off the bike. Key Features: Tempesta Stretch fabric with windproof PU membrane provides 10,000mm waterproofness,20,600g/m2/24h breathability,Taped shoulder seams for waterproofing,Stretchy for extremely comfortable fit that moves with you,Packable enough to fit in jersey pocket,Covered easy-sliding YKK® Vislon® zipper,Extra-long tail for protection from wheel spray,Vented back,Reflective stripe on lower back,5° – 14°C / 41° – 57°F,Weight: 204g (Large).
The Crankbrothers Mallet clip-in shoe plays nice on the race track and at the bike park. Our innovative Match System optimizes engagement for any MTB clip-in system, whether that’s Crankbrothers or SPD. It comes with Match shim and Crankbrothers cleat pre-installed in a neutral position so they are ready to ride with Crankbrothers pedals right out of the box. Key Features: Outsole Match Box optimized for any MTB pedals, Race Zone for control and stability,Ramp for easy clip-in / out and mud clearance,Pre-installed Match Shim for Crankbrothers pedals,Pre-installed cleat for Crankbrothers pedals,MC1 mid-friction compound for easy exit,Directional angled & spaced toe / heel lugs for traction while hiking,Ramped toe for walkability,Stiff shank for power transfer,Cushioned EVA midsole for shock absorption,. Upper Round laces for smooth closure, Lace pocket for safety and style,Ventilated windows with perforated mesh material for breathability,Padded tongue for protection,TPU reinforced areas for protection and abrasion resistance,Heel dots for grip and superior heel hold,Hidden eyelets for durability and clean design.
The Crankbrothers Mallet E clip-in shoe excels for enduro races or all-day adventures. Featuring a carbon-injected nylon shank, the Mallet E shoe offers pedaling efficiency without compromising on shoe-to-pedal interface. Our innovative Match System optimizes engagement for any MTB clip-in system, whether that’s Crankbrothers or SPD. It comes with Match shim and Crankbrothers cleat pre-installed in a neutral position so they are ready to ride with Crankbrothers pedals right out of the box. Key Features: Outsole Match Box optimized for any MTB pedals,Ramp for easy clip-in / out and mud clearance,Pre-installed Match Shim for Crankbrothers pedals,Pre-installed cleat for Crankbrothers pedals,MC1 mid-friction compound for easy exit,Directional angled & spaced toe / heel lugs for traction while hiking,Ramped toe for walkability,Stiff shank for power transfer,Cushioned EVA midsole for shock absorption,. Upper Round laces for smooth closure,Lace pocket for safety and style,Ventilated windows with perforated mesh material for breathability,Padded tongue for protection,TPU reinforced areas for protection and abrasion resistance,Heel dots for grip and superior heel hold,Hidden eyelets for durability and clean design.
Womens road cycling shoes with race-inspired style and features. Key Features: Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance.,Low stack height midsole stabilizes foot and maximizes power transfer efficiency.,T1-Quick strap and extra-wide collar simplifies foot entry and quickens transitions.,Quickly secure shoe during transitions with easy to grab asymmetrical heel loop.,3D breathable mesh improves airflow and dries quicker.,Women’s specific last for a natural, comfortable fit.,Lightweight glass fiber reinforced nylon sole for power transfer.,Adaptable Cup Insole..
Description will appear here shortly...
Singletrack TrailblazerThe last thing you want to be thinking about in the middle of a long backcountry ride is your helmet. It should be well ventilated. It should protect your head. And it should fit so well that you don’t know it’s there. The Sixer takes to the trail with our integrated MIPS technology, resulting in a sleeker, closer-to-the-head fit that combines with our Float Fit system and proprietary Sweat Guide to ensure unprecedented comfort in a helmet. Goggle compatibility complete with a strap gripper at the rear of the helmet, adjustable visor height, integrated camera/ light mount and a full hard shell rounds out the package. We’ve sweated every detail on the Sixer so that out on the trail, the only sweating you’ll have to worry about is your own.Key Features:Weight: 395 grams,Vents: 26 vents, 4 brow ports,Certifications: CPSC Bicycle, CE EN1078,Dual Flow Ventilation,Construction: Fusion In-Mold Polycarbonate Shell, Exposed Polycarbonate Roll Cage, Progressive Layering,Float Fit Race (integrated with MIPS),4-Position Adjustable Visor,Integrated Breakaway Camera Mount,Goggle Gripper,No-Twist Tri-Glides,Sweat Guide,X-Static Padding,MIPS (integrated with fit system).
High tech, back-free, ventilation optimised carry device for hydration and other essential needs on shorter rides. With enough space for a tube, some tools and a 1,5l hydration system it comes with a very dialled system that is an extra in comfort, that we call Ventiflap: increase the back distance for climbing and tighten it to the hip for the downhill, simply by pulling a string! Key Features:Hydration bladder 1,5L ,Airflow Contact System offers perfect back ventilation ,Ventiflap for uphill- and downhill mode adjustment ,2 Bottle Carriers with extra safety fixation - easy to reach ,Material: N 210D RIPSTOP HD, 3D AIR MESH, AIROFLEX ,3L, 430g + 130g Bladder, 28 x 18 x 8 cm.
Gusset Hunter Crank ArmsClassic style multi-purpose BMX type 3-piece pro cranks with 48 spline fixing..,Round section taper tubing and welded torque drive boss..,625g (arms only).145mm x 19mm x 48 spline axle included.Black.165, 170 or 175mm.Includes fitting/extractor tool.,
Key Features:1/2" X 11/128".,Pin Length: 5.65 mm.,116 Links.,Weight: Super Light, 243 grams.,Various Colours Available.,Non Directional.,Diamond Like Coating for top Performance.,For Shimano, Campagnolo and SRAM 11-speed derailleur systems.