The Savix™ II road shoe offers the comfort you’d expect from Giro with the quick adjustment provided by a Boa® dial. With a single dial and a set-and-forget front strap, you can quickly get in your shoes and get on the road. The Boa® L6 dial offers 1mm adjustment increments when tightening, and a macro-release function to get out of the shoe. The universal 3/2 nylon composite outsole allows you to mount either mountain bike or road cleats depending on your pedal preference. Upper: Boa® L6 (1mm + with macro release) retention with lower-volume strap Synthetic upper Outsole: Nylon composite outsole with universal cleat mount (2- or 3-bolt) Dual injected TPU toe and heel pad Footbed: Die-cut EVA footbed
The Sorpasso RoS Bibtight from Castelli is made for long ride in the widest range of conditions. The tight features the ultra-stretchy, warm and water repellent Nano Flex 3G fabric. The fabric uses the third generation of Castellis nanotechnology fabric treatment that adds a high level of water repellency without affecting breathability, stretch or warmth. The fabric also offers a compressive fit that moves with you for all-day comfort. On the thighs and rear of the tights there are panels of Nano Flex Xtra Dry fabric to provide a bit more wind protection and warmth, as well as protection from any road spray. Its not only about the fabrics. Anatomical patterning gives a bend at the knee and the hip, while seamless bib straps lie flat and hold the tights and seat pad perfectly in place so you can concentrate on your efforts. Multiple reflective panels keep you visible and YKK Camlock zippers at the ankles make for easy on and lock and a secure closure. The Bibtight uses Castellis Progetto X2 seat pad. This pad features two isolated layers that work in tandem with your body and saddle to eliminate friction while still offering substantial cushioning whereitsneeded most. Key Features Rain or Shine engineering Nano Flex 3G fabric for the ideal mix of warmth, stretchy compression, softness, and water repellency Nano Flex Xtra Dry fabric panel on upper front and thighs for extra warmth, and on the back to protect from road spray Anatomic cut to hips and knees Reflective inserts for visibility from behind Lie-flat elastic bib straps YKK Camlock zippers at ankles Progetto X2 Air seamless seat pad for long hours in the saddle 0 12C / 32 54F Weight: 302g (Large)
Our new performance helmet is designed to deliver coolness in ways like never before. With precise ventilation ports and internal channels to control air intake and release at both low and high speeds, the helmet provides a supreme cooling effect over the whole head. Ideal for long rides in the mountains or hotter days in the saddle. Winner of the coveted Design and Innovation Award 2019, the Ventral Air SPIN works to enhance a riders aerodynamic profile and minimize drag. Specific airflow zones enhance ventilation and cooling, while the aerodynamically optimized trailing edge reduces turbulence. The exceptionally lightweight Ventral Air SPIN has been developed according to our wholehelmet approach. It features a fully wrapped unibody shell construction and an EPS liner, delivering an ideal balance between weight and safety. Our patentpending silicone pad technology system SPIN also features. Practical features include a lightweight size adjustment system that guarantees a personalized fit, and an eye garage for easy and secure storage of eyewear when not in use.
High performance trail-conqueror. All new Tallac combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. The Cordura® upper is breathable and lightweight, but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. Features: MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. Traditional lacing for a tailored fit. Elastic lace tuck to keep laces secure. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt, debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
Our Hydromatic collection of outerwear incorporates key features to battle tough riding conditions with a lightweight, aerodynamic fit. Stay warm and dry without sacrificing style and comfort. Features Mechanical Stretch Woven with 2.5 layer 10k/10k waterproof/breathable laminate. Water Resistant Coating to minimize liquid penetration. Boa system dial and lace technology for a lightweight, incrementally adjustable waist closure for ideal fit. Stablilization pocket to store device or tool.
Our Hydromatic collection of outerwear incorporates key features to battle tough riding conditions with a lightweight, aerodynamic fit. Stay warm and dry without sacrificing style and comfort. Features Mechanical Stretch Woven with 2.5 layer 10k/10k waterproof/breathable laminate. Water Resistant Coating to minimize liquid penetration. Boa system dial and lace technology for a lightweight, incrementally adjustable waist closure for ideal fit. Stablilization pocket to store device or tool.
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
The Cadet™ combines a supple, breathable Synchwire™ upper with a stout carbon fiber reinforced plate for pedaling efficiency, plus a supportive footbed with Aegis® anti-microbial treatment for optimal comfort and fit. The single BOA® L6 dial offers micro-adjustable tuning in 1 mm increments, and combined with the adjustable forefoot strap, cradles your foot securely. This shoe is a great choice for riders looking for inspired performance, lasting comfort and value. Upper: One-piece Synchwire™ upper with thermo-bonded exo-structure Laser-perforated ventilation throughout BOA® L6 dial featuring 1mm adjustment and macro release,with steel lace and soft lace guides Reflective heel tab Outsole: Carbon fiber reinforced outsole with universal cleat mount (2- or 3-bolt) Dual injected TPU toe and heel pad Footbed: Die-cut EVA footbed with medium arch support Weight: 265 grams (size 42)
The Cadet™ combines a supple, breathable Synchwire™ upper with a stout carbon fiber reinforced plate for pedaling efficiency, plus a supportive footbed with Aegis® anti-microbial treatment for optimal comfort and fit. The single BOA® L6 dial offers micro-adjustable tuning in 1 mm increments, and combined with the adjustable forefoot strap, cradles your foot securely. This shoe is a great choice for riders looking for inspired performance, lasting comfort and value. Upper: One-piece Synchwire™ upper with thermo-bonded exo-structure Laser-perforated ventilation throughout BOA® L6 dial featuring 1mm adjustment and macro release,with steel lace and soft lace guides Reflective heel tab Outsole: Carbon fiber reinforced outsole with universal cleat mount (2- or 3-bolt) Dual injected TPU toe and heel pad Footbed: Die-cut EVA footbed with medium arch support Weight: 265 grams (size 42)
The Cadet™ combines a supple, breathable Synchwire™ upper with a stout carbon fiber reinforced plate for pedaling efficiency, plus a supportive footbed with Aegis® anti-microbial treatment for optimal comfort and fit. The single BOA® L6 dial offers micro-adjustable tuning in 1 mm increments, and combined with the adjustable forefoot strap, cradles your foot securely. This shoe is a great choice for riders looking for inspired performance, lasting comfort and value. Upper: One-piece Synchwire™ upper with thermo-bonded exo-structure Laser-perforated ventilation throughout BOA® L6 dial featuring 1mm adjustment and macro release,with steel lace and soft lace guides Reflective heel tab Outsole: Carbon fiber reinforced outsole with universal cleat mount (2- or 3-bolt) Dual injected TPU toe and heel pad Footbed: Die-cut EVA footbed with medium arch support Weight: 265 grams (size 42)
The Rincon™ combines a supple, breathable Synchwire™ upper with a stout carbon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won’t de-laminate or break down. A supportive 3D molded footbed with Aegis® anti-microbial treatment enhances comfort and fit, which is adjustable via a single BOA® L6 dial featuring 1 mm adjustment and and an adjustable forefoot strap. It’s a great choice for riders looking for inspired performance that’s capable on the course or Off the-beaten track. Upper: One-piece Synchwire™ upper with thermo-bonded exo-structure Rubber reinforced heel and toe sections BOA® L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides Reflective heel tab Outsole: Nylon-composite 2-bolt plate with dual-injected rubber outsole Stainless steel hardware Footbed: 3D Molded footbed with medium arch support Weight: 340 grams
Unrivalled lightweight control and durability Oversized 35mm clamping diameter for extra strength Robust, featherweight carbon fibre layup tuned for the perfect balance of stiffness and compliance Rise: 5mm Width: 740mm
The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm. Technical Specification: Material: 2014 Alloy Bolts: Titanium with black PVD finish Top Cap: Aero top cap with alloy screw included Faceplate: 2-piece Stack Height: 36mm Angle: 82 degrees Clamp diameter: 31.7mm Fork Steerer Diameter: 1 1/8” (28.6mm) Sizes: 90mm, 100mm, 110mm, 120mm, 130mm Cable Routing: DCR System, suitable for up to 4 cables Compatible with: All Deda Elementi handlebar extensions Weight: 140g (110mm size)
The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm. Technical Specification: Material: 2014 Alloy Bolts: Titanium with black PVD finish Top Cap: Aero top cap with alloy screw included Faceplate: 2-piece Stack Height: 36mm Angle: 82 degrees Clamp diameter: 31.7mm Fork Steerer Diameter: 1 1/8” (28.6mm) Sizes: 90mm, 100mm, 110mm, 120mm, 130mm Cable Routing: DCR System, suitable for up to 4 cables Compatible with: All Deda Elementi handlebar extensions Weight: 140g (110mm size)
The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm. Technical Specification: Material: 2014 Alloy Bolts: Titanium with black PVD finish Top Cap: Aero top cap with alloy screw included Faceplate: 2-piece Stack Height: 36mm Angle: 82 degrees Clamp diameter: 31.7mm Fork Steerer Diameter: 1 1/8” (28.6mm) Sizes: 90mm, 100mm, 110mm, 120mm, 130mm Cable Routing: DCR System, suitable for up to 4 cables Compatible with: All Deda Elementi handlebar extensions Weight: 140g (110mm size)
The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm. Technical Specification: Material: 2014 Alloy Bolts: Titanium with black PVD finish Top Cap: Aero top cap with alloy screw included Faceplate: 2-piece Stack Height: 36mm Angle: 82 degrees Clamp diameter: 31.7mm Fork Steerer Diameter: 1 1/8” (28.6mm) Sizes: 90mm, 100mm, 110mm, 120mm, 130mm Cable Routing: DCR System, suitable for up to 4 cables Compatible with: All Deda Elementi handlebar extensions Weight: 140g (110mm size)
The RS series represents the most innovative and technological production from Deda Elementi. The application of the best materials and advanced manufacturing process to deliver the lightest possible aero components. An exclusive and elegant finish gives the RS series a unique stylish touch. The Polish on Black finish of this stem matches perfectly with the Superzero RS handlebar. It is constructed from 2014 aluminium and has been manufactured using an innovative 3D forging process to get a completely flat design. Compared to the standard version of the Superzero Stem, this stem also features special titanium screws with black PVD finish. Used in combination with the matching RS handlebar this is the lightest aero bar set-up on the market. The Superzero RS stem is available in 5 lengths from 90mm to 130mm. Technical Specification: Material: 2014 Alloy Bolts: Titanium with black PVD finish Top Cap: Aero top cap with alloy screw included Faceplate: 2-piece Stack Height: 36mm Angle: 82 degrees Clamp diameter: 31.7mm Fork Steerer Diameter: 1 1/8” (28.6mm) Sizes: 90mm, 100mm, 110mm, 120mm, 130mm Cable Routing: DCR System, suitable for up to 4 cables Compatible with: All Deda Elementi handlebar extensions Weight: 140g (110mm size)
Your buddy on the road. Available in four sizes and created with our Advanced Rollsys® fit system, we aim to bring you ultimate comfort in a perfectly-fitting helmet. Eighteen cooling inlet and exhaust ventilation holes connected by carefully engineered air channels are designed to draw air from the front to the rear of your head, keeping you cool and ready to perform for the duration of your ride. On rainy days, the Sphere can be combined with the optional Aeroshell to protect you from the elements. More comfort and convenience come with integrated eyewear docking, lightweight and thin straps, reflective stickering and a ponytail friendly rear head basket design.
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
Thermo-regulating long sleeve jersey made with POLARTEC® Power Wool fabric. Insualtion to keep you body temperature stable during your mid-season rides or as an extra layer over baselayers or under jackets when the temperatures drop. Warm And Multi-season Made of the POLARTEC® Power Wool, thermo-regulating Merino wool and polyamide fabric to keep you warm during your rides. Perfect as a multi-season garment, ADAPT keeps your body temperature stable during mid-season rides or can be used as an extra layer between baselayer and jacket when the temperatures drop. Perfect Fit New level of comfort and fit. Cuffs and waistband in ribbed super-spacer fabric. Coloured elastic gripper with silicon on the rear. High-visibility Reflective tabs on the back for high-visibility in the dark. How to take care of your Santini cycling and triathlon wear Here are a few of the secrets that we've learned over the years to keep your kit performing at its best and last longer. Wash it at 30°C / 86°F Do not use fabric conditioner Avoid the tumble drier Avoid using washing powder, favor liquid detergent Turn the garment inside out Wash similar colours together Wash straight away Do not iron