The Bricktown LTD features a strong and lightweight steel frame that is equipped it with a Shimano Nexus 7-Speed internal gear hub, powerful V-brakes and high-grip Veerubber City tyres. It is also adorned with a dynamo-powered front light, rear LED light and a front cargo carrier rack. The Bricktown LTD model from Ortler offers a modern spin on a classic vintage model. It features a slender look with the strikingly large front luggage rack which harks back to a style reminiscent of the middle of the last century. At that time, the so-called 'Porteur' bicycles features a sturdy front luggage rack, a necessity in an era where not every household had access to a car. With the Bricktown LTD, Ortler revives this concept again. This practical and elegant bicycle will appeal to urban cyclists who require a vehicle that can confidently and comfortably transport them through the city. The bike features a comfortable saddle seat, 7 gears and modern components. Bags, backpacks and groceries can be safely transported on the luggage rack, in full view of the rider. With its attractive looks and practical features, the Ortler Bricktown LTD is the obvious choice for urban riders. Additional Features: Pedals: Marwi SP-687 Luggage Rack: Ortler front carrier, Hi-Ten steel Stand: Central stand Mudguards: Aluminium Front Light: Shimano DHC3003, 6V 3.0W, Hub dynamo Rear Light: Büchel Retro Sport LED Chrome Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Bricktown LTD Trapeze features a strong and lightweight steel frame with trapeze geometry for reliability and easy access for convenient mounting on and off the bike. Ortler has also equipped it with a Shimano Nexus 7-Speed internal gear hub, powerful V-brakes and high-grip Veerubber City tyres. It is also adorned with a dynamo-powered front light, rear LED light and a front cargo carrier rack. The Bricktown LTD model from Ortler offers a modern spin on a classic vintage model. It features a slender look with the strikingly large front luggage rack which harks back to a style reminiscent of the middle of the last century. At that time, the so-called 'Porteur' bicycles features a sturdy front luggage rack, a necessity in an era where not every household had access to a car. With the Bricktown LTD, Ortler revives this concept again. This practical and elegant bicycle will appeal to urban cyclists who require a vehicle that can confidently and comfortably transport them through the city. The bike features a comfortable saddle seat, 7 gears and modern components. Bags, backpacks and groceries can be safely transported on the luggage rack, in full view of the rider. With its attractive looks and practical features, the Ortler Bricktown LTD is the obvious choice for urban riders. Additional Features: Pedals: Marwi SP-687 Luggage Rack: Ortler front carrier, Hi-Ten steel Stand: Central stand Mudguards: Aluminium Front Light: Shimano DHC3003, 6V 3.0W, Hub dynamo Rear Light: Büchel Retro Sport LED Chrome Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-509 Black 6.5x1.5" 972-01-512 Black 7.25x1.75" 972-01-508 Black 7.5x2.0"
This mountain bike (MTB) rear shock features a lightweight EVOL air spring, which offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"
Providing intuitive shifting, easy setup and reliability on every mile of road, this rear derailleur is engineered for performance. It features a tough aluminium cage, which allows it to handle all of the demands and challenges associated with long days on your road bike. SRAM has also equipped this model with ceramic pulley bearings, so riders can enjoy smooth and dependable shifting operation as they change gear. Coming kitted out with some of the finest technologies available from SRAM such as eTap shift logic, AXS, Orbit chain management and larger X-Sync pulleys, this is a great choice of upgrade for benefitting from a more rider-tuned and customisable feel as you clock up the miles. Road Bike Rear Derailleur with AXS Connectivity If your ride doesn’t feel complete until you get a little dirt on your tyres, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal assurance. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - Orbit chain management technology keeps the drivetrain quiet and secure - 1x specific for use with 10-44 XPLR and 10-36 cassettes - SRAM AXS enabled, allowing easy personalisation - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments. X-Sync: SRAM X-SYNC chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation. Orbit: Orbit technology is an innovative form of derailleur motion control. It utilises silicon fluid as part of an elegant and ultra-lightweight damper system. Compared to a standard friction clutch system, Orbit technology places no additional resistance on the rear derailleur’s spring when under slow or light movement. This means easier shifting and rear wheel removal. And while riding, the fluid damper reduces chain bounce. Manufacturer's Part Number: 00.7518.157.000
The Robens Double Dreamer 5 Tent sleeps up to five campers, perfect for adventurers looking for base tent comfort with standing height and all-weather performance. Key features include a rain safe side door for water-free access, double rear and low vents to control air flow, also enhanced by mesh panels behind external doors for insect-free ventilation, and an adaptable inner tent that can fold back and enhance living space. Plus, the mesh panel window is backed by a zip-up waterproof curtain with upper PVC panel to balance privacy, ventilation and light entry. Robens Wind Test The determination of the performance of a Robens tent in wind is based on the knowledge and technique available to Robens at the time of testing. During the test they register the maximum (MAX) speed impact a tent was subjected and the average (AVG) wind speed at which structural instability occurred. This may appear as a broken/deformed pole, or the collapse of the tent and subsequent return to shape when the wind drops. At no point was any form of catastrophic failure experienced up to the maximum wind speed. The MAX speed for this tent is 195 km/h, and AVG 160 km/h.
This off-road rear mech can be used for MTB or enduro riding as it features a hard-wearing forged aluminium and stainless-steel construction, that's more than capable of handling all the abuse that's associated with long days on the trails. SRAM has packed this model with its finest technologies such as Overload Clutch protection, where in the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. SRAM has also equipped this trail-ready rear mech with its renowned AXS technology. AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the bike of your dreams. Part of the top-level Eagle series, this MTB rear derailleur is a lighter, simpler, more durable, and easier to use model. Eagle features 1x components, engineered for even greater durability and performance while maintaining a significant weight advantage over other drivetrain solutions. Eagle technology also provides an expanded gear range of 500%, while is equal to 2x11 drivetrains. - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalise SRAM and RockShox components - System is completely water and dust proof to IP69K - Battery sold separately It’s a MTB derailleur that’s specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider’s liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings. Technologies: AXS: When SRAM launched the original RED eTap in 2015, one of its most exciting features was that it was wireless. Now, we’ve taken eTap wireless to the next level with AXS. AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Wireless controls open the door to new levels of customization. With AXS, you can personalize your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyzes your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments. Cage Lock: With Cage Lock technology in the rear derailleur, wheel removal and installation - as well as chain installation - becomes faster and simpler. Just push the cage forward to create slack and lock it into place. Overload Clutch Protection: The Eagle AXS™ derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The primary purpose of the Overload Clutch is to protect the derailleur shift motor, but it serves to protect your derailleur and derailleur hanger from damage as a by-product. A very helpful by-product. X-Horizon: This rear derailleur's "straight parallelogram" design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain hap across all gears. X-Sync: SRAM X-Sync™ 1X chain rings provide the highest level of performance and durability. The SRAM X-SYNC™ tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC™ chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC™ rings are an integral part of the SRAM 1X™ drivetrain. Eagle: Eagle technology represents our newest 1x drivetrain technology. Eagle is a lighter, simpler, more durable, and easier to use drivetrain. Eagle features all-new 1x components, engineered for even greater durability and performance while maintaining a significant weight advantage over other drivetrain solutions. Eagle technology also provides an expanded gear range of 500%, while is equal to 2x11 drivetrains.
Top-Level Design and Construction Featuring top-level design and construction, SRAM has made a lightweight carbon crankset, which is specifically designed for Boost 148mm rear spacing and the rigours of a modern mountain biker. It can tackle any terrain, in any condition and at speeds a mountain biker can only dream of. DUB Technology DUB technology is the foundation for optimising and enhancing the XX1 crankset design further, purely by simplifying the interface between the spindle and the bottom bracket. DUB-powered cranksets are designed with simplicity, compatibility and durability in mind, are much more functional and higher performing.
These MTB forks feature an updated DebonAir air spring that's paired with a Charger RC2 damper for amazing control and precision on your adventures. RockShox has also added SKF wiper seals and Maxima Plush damping fluid, which all work overtime to reduce friction, silence noise and provide you with excellent suspension performance on every ride. Coming complete with a sleek appearance, these forks look as awesome as they perform as you blast across the rock gardens, tree roots and debris in style. Updated highly tunable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Designed to reduce hand fatigue and fight unwanted friction, the Charger™ 2.1 damper increases confidence and control over every trail. Charger™ 2.1 RC2 damper featuring independent high and low speed compression adjust. Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. Maxima Plush damping fluid reduces friction and silences damper noise. Ultimate foil graphics package.
This trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders. Adjustable Coil Spring Rear Shock Benefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a high-quality coil spring ready design and an updated damper. The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate. Please note: A coil spring is not included with this model but is available to purchase separately. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off. Manufacturer's Part Numbers: 978-01-054 Black 8.5 x 2.5" 978-01-053 Black 7.875 x 2.0"
Ideal for riding singletrack trails, dirt jumps and woodland trail sessions, the Clash Dirt Jump is a superb go-anywhere hardtail for the adventurous rider, this Clash mountain bike by NS Bikes uses its slick 8-speed transmission and sturdy aluminium construction to push you from the city to the trails and beyond. This versatile MTB is ideal for honing your MTB skills thanks to its tough and lightweight frame and Shimano Altus drivetrain. Whether commuting, shredding pump tracks or rolling around the streets, the Clash gives a quality feel on every outing. 26" NS Fundamental Wheels and Kenda Small Block 8 Tyres Strong enough to deal with the abuse of off-road riding, this excellent mountain bike (MTB) soaks up every riding impact with its 120mm-travel Suntour XCM fork. Tektro Novela disc brakes ensure reliable all-weather stopping power, reeling in the 26" NS Fundamental wheels with superb control. The in-house cockpit and Octane One Rocker2 saddle add comfort and composure to this string and responsive hardtail mountain bike. Hit the local trails on your way back from school, learn how to bunnyhop, rail berms or clear your first small doubles. Our fun machines are built with the same DNA as their dirt and mountain bikes and come in multi-functional, budget-friendly packages that riders of all levels will love. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Ready to carry you to the top of the podium, this stunning duo features a deep hollow-forged aluminium crown for amazing toughness as you battle through the most aggressive of rides. Additionally, its 7050 butted aluminium legs provide another layer of durability and longevity as you blast across unpredictable terrain conditions against the clock. Adjustable MTB Forks Perfect for tackling every off-road challenge, these forks are equipped with some of the finest adjustable features to have you shredding with style. Their adjustable low and high speed compression damping, hydraulic bottom-out circuit and a fully adjustable air spring gives you the tools to dial in your ride exactly how you want it. As a result, you'll benefit from being able to easily customise these to match your specific riding style, discipline or terrain conditions. Technologies: Reverse Arch: Reverse Arch has equivalent stiffness with less weight. By placing the arch in the rear, behind the high point of the tyre, Manitou’s reverse arch design achieves equivalent stiffness with less weight. The arch is shorter in height, resulting in more efficient use of material. MC² (Multi-Control Compression): Manitou’s MC² (Multi-Control Compression) Damper comes in a fully sealed bladder cartridge offering independent Lo Speed and Hi Speed Compression adjustments. TPC Rebound: Two Stage Shim Stack to better isolate low speed and high speed rebound damping. Optimizes the rebound response for short travel chatter and deep travel hits without the complexity of adding in another adjuster. Bladder Cartridge: The sealed system separates air from the oil in the damper maintaining damping consistency in the most severe riding conditions. The new Mezzer bladder cartridge reduces the oil volume resulting in a lower overall weight. At the same time it assures a low brake away force from optimized shaft seal design. Blow Off Valve: Patent pending bladder blow off valve prevents over pressurisation and rupture of the bladder. HBO (Hydraulic Bottom Out): The internal HBO circuit ramps up damping during the final 30mm of travel protecting you from hard unexpected bottom-outs. Dorado Air: Our lowest weight World Cup proven high performance air spring technology offering ultimate sensitivity, featuring a self equalizing” negative air spring. Originally developed for the Dorado down hill fork, Dorado air has a single fill valve (on the bottom of the fork) that simultaneously fills the positive and negative air chambers, so the pressure is equalised. IRT (Infinite Rate Tune: Infinite Rate Tune (IRT) allows the rider to control mid stroke support and bottom out progressivity independent from initial spring rate to independently tune small bump sensitivity and big hit performance. Hollow-bore Crown: Chassis stiffness and weight optimized with Manitou’s patented Hollow-Bore Crown. Low Friction Wipers: Proprietary SKF low-friction rubber compound and sealing lip profile to further reduce the friction in the Mezzer. New Hexlock SL2: The new tooled Hexlock SL2 axle saves 26g over the previous version). Manufacturer's Part Numbers: 191-36235-A001 Black 27.5" 180mm - 44mm Option 191-35561-A001 Black 29" 180mm - 51mm Option 191-36235-A101 Black 27.5" 180mm - 37mm Option 191-35561-A101 Black 29" 180mm - 44mm Option
The Energie 24 Kids CX features a lightweight and durable aluminium frameset that features modern CX-race geometry that's optimised for exceptional pace, stability and all-day riding comfort. Vitus has equipped it with a wide-ranging Microshift R8 8-Speed drivetrain and powerful Tektro disc brakes. It also rolls upon 24" Vitus wheels wrapped in high-grip Kenda Small Block Eight tyres. As the appeal of cyclocross continues to grow, so more clubs and juniors are keen to have a go at this exciting discipline. But it’s not enough to simply scale down adult race bikes. The Vitus Energie Kids is a ground-up rethink of how a bike should be built for growing bodies, smaller hands and new young riders who are keen to practise their handling and control. Cyclocross is a great way for kids to quickly improve their riding skills - the tight corners, hills, mud and obstacles - and doing it on a bike that fits and feels right will fast-track their progression and confidence. Control is everything. The Energie Kids combines flat-mount disc brakes with short-reach shifters, ensuring that smaller hands always have their fingers in the right place for steering and braking. And for narrower shoulders, the handlebar is compact too, with a smaller drop and shorter reach to prevent the instability of over-stretching. 1.5-inch (38mm) Kenda tyres offer plenty of traction for wet days whether racing or simply enjoying a family ride, and bolt-thru axles really help to firm up the feel and efficiency of the bike. A single front chainring combines with a Microshift rear derailleur to keep the shifting light so that even when small hands are wrapped up in gloves on colder days, it’s easy for them to tap through the gears. As adults, we know how awkward and inhibiting it can be to ride a bike that doesn’t fit properly. That’s why everything about the Energie Kids is optimised - from the narrower bottom bracket area to relieve pressure on young hips to the short stem to improve the responsive handling. To have the most fun on a bike, to get the most out of it, to fall in love with riding bikes even, it needs to feel great. The Energie Kids is a cyclocross bike with features that give it the versatility to help your kids grow as riders whether on or off the race circuit. Key Features: CX Specific Build: Versatile and ready to tackle any surface Frame Material: 6061-T6 Aluminium Wheel Size: 24" Intended Use: Road - Cyclocross Lightweight 6061-T6 Aluminium frame CX specific build with race ready performance Huge mud clearance Microshift R8 1x8-Speed groupset Powerful and reliable cable disc brakes Features: Frame: Energie 24 Aluminium, 6061-T6 Aluminium, Disc Brake, Internal Cable Routing, Mudguard Mounts, Flat Mount,12mm x 142mm Hub Spacing, Axle Specifications: 160mm Length, 14mm Thread Length, M12xP1.5 Thread Pitch Fork: Energie 24 Aluminium, 6061-T6 Aluminium, 1 1/8” Steerer, Flat Mount, 100 x 12mm Axle Headset: Neco Semi-Integrated Threadless Headset, 1 1/8”, 44 / 28.6 – 44 / 30 Handlebar: Vitus 6061 Aluminium, Reach: 65mm, Drop: 100mm, Width: 340mm Stem: Vitus 6061 Aluminium, Bar Bore: 31.8mm, Length: 40mm Grip(Tape): Vitus, EVA Cork Wheelset: Vitus, 24", 6-Bolt Disc Brake, HG Freehub, 12mm x 100mm Front, 12mm x 142mm Rear F/rim: Vitus Shining, A-M5, 24", 28 Hole R/rim: Vitus Shining, A-M5, 24", 28 Hole F/hub: Vitus KT, XF1F-12, 28 Hole, 6 Bolt, 142 x 12mm R/hub: Vitus KT, M4ZR, 28 Hole, 6 Bolt, 100 x 12mm, HG Freehub F/tyre: Kenda Small Block Eight, 24" x 1.5" R/tyre: Kenda Small Block Eight, 24" x 1.5" Chain: KMC X9, 8 Speed Crankset: Prowheel A10XPP, 32T, Crank Length: 140mm Bottom Bracket: Cartridge Square Taper, BSA Threaded, 68mm, English F/brake Set: Tektro MD-C510 Disc Brake, Flat Mount, Cable Actuated R/brake Set: Tektro MD-C510 Disc Brake, Flat Mount, Cable Actuated Rotors: Tektro TR160 & TR140, Front: 160mm, Rear: 140mm R/derailleur: Microshift R9, RD-R43M for 8/9/10 Speed R/shifter: Microshift R8, SB-R480, 8 Speed Freewheel: Microshift R8, CS-H081, 8 Speed, 11-34T Saddle: Vitus, Steel Rail Seat Post: Vitus 6061 Aluminium, 27.2mm x 350mm Seat Screw: Aluminium 31.8mm, Stainless Steel Bolt Weight: 8.9kg Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Vitus Razor features an aluminium frame and carbon fork, offering a superb balance of strength, agility and all-day riding comfort. Vitus has also equipped it with a fast-shifting Shimano Claris 2x8-Speed groupset, powerful Tektro caliper rim brakes and a quality aluminium Vitus finishing kit. Feeling a road bike surge forward when you press on the pedals and the excitement that comes from the ease of acceleration - that’s how road cycling should feel. Whether you are stepping over your first road bike or pulling away from lights on a regular commute, the Vitus Razor delivers that same sensation of speed and freedom. And it never gets old. At every level, a road bike should be nimble and comfortable. It should build confidence with stable handling and be equipped with reliable components. The Razor brings the recognisable sleek lines of a lightweight road bike to the everyday cyclist. Shimano Claris 8-Speed Groupset and Tektro Caliper Brakes A closer look sees a high-quality double-butted aluminium frame paired with a lightweight carbon fork. The traditional rim brakes are easy to maintain and the robust 28mm tyres feel stable and grippy. The addition of mudguard mounts and internal cable routing will protect you and the bike from dirt coming up off the road and the 8-speed Shimano Claris gearing offers plenty of range for encounters with hills. The Razor is an honest, reliable road bike that is a great option for both newcomers to the sport or those looking for something robust and nippy for training and commuting. Key Features: Razor Platform: Sporty, comfortable and durable road bike Frame Material: 6061-T6 Double Butted Aluminium Wheel Size: 700c Intended Use: Road - Performance Sporty looks and a comfortable riding position 6061 T-6 double butted aluminium frame with carbon fork Tapered head tube and fork steerer Internal cable routing Shimano Claris R2000 drivetrain Vitus wheels and fast, comfortable 28mm tyres Features: Frame: Razor Aluminium, 6061-T6 Double Butted Aluminium, Rim Brake, Internal Cable Routing, Mudguard Mounts, 130mm QR Axle Fork: Razor Carbon, UD Carbon, Tapered Aluminium Steerer, QR, Mudguard Mounts Headset: ACROS Aix 322 R3, Sealed Bearings, OD46, 1 1/8” – 1 ½”, 41.8 / 28.6 – 52 / 40 Handlebar: Vitus 6061 Aluminium, 80mm Reach, 124mm Drop, XS:400mm S:400mm M:420mm L:420mm XL:440mm XXL:440mm Stem: Vitus 6061 Aluminium, Bar Bore 31.8mm, +/- 7 degrees, XS:80mm S:90mm M:100mm L:110mm XL:110mm XXL:120mm Grip(Tape): Vitus, EVA Cork Wheelset: Vitus, 700c, Rim Brake, HG Freehub, QR Axles F/rim: Vitus Shining, A-X240, 700c, 24 Hole, Eyelets R/rim: Vitus Shining, A-X240, 700c, 28 Hole, Eyelets F/hub: Vitus KT, 515F, 24 Hole, QR R/hub: Vitus KT, GTER, 28 Hole, QR, HG Freehub F/tyre: Kenda Kwick Roller Sport, 700c x 28c R/tyre: Kenda Kwick Roller Sport, 700c x 28c Chain: KMC HG-40, 8 Speed Crankset: Prowheel Ounce, 50/34T, 8 Speed, XS:165mm S:170mm M:170mm L:175mm XL:175mm XXL:175mm Bottom Bracket: Cartridge Square Taper, BSA Threaded, 68mm, English F/brake Set: Tektro R317, Dual Pivot, Long Reach R/brake Set: Tektro R317, Dual Pivot, Long Reach F/derailleur: Shimano Claris R2000, FD-R2000, Braze-On, 2 x 8 Speed R/derailleur: Shimano Claris R2000, RD-R2000, 8 Speed L/shifter: Shimano Claris R2000, ST-R2000-L, 2 x 8 Speed R/shifter: Shimano Claris R2000, ST-R2000-R, 8 Speed Freewheel: Sunrace M66, 8 Speed, 11-32T Saddle: Vitus, Steel Rail Seat Post: Vitus 6061 Aluminium, 27.2mm x 350mm, 12mm Offset Seat Screw: Aluminium 31.8mm, Stainless Steel Bolt Weight: Medium: 9kg Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Razor W features a sporty aluminium frame and carbon fork with comfortable geometry, and it is equipped with superb components and a stylish finishing kit. Vitus fitted it with a Shimano Claris 2x8-Speed groupset, powerful dual-pivot caliper rim brakes and it rolls upon alloy Vitus wheels wrapped in high-grip Kenda Kwick Roller Sport tyres. Ideal for road racing, long-distance endurance events and general fitness cycling, the Razor W is dependable and fun. Feeling a road bike surge forward when you press on the pedals and the excitement that comes from the ease of acceleration - that’s how road cycling should feel. Whether you are stepping over your first road bike or pulling away from lights on a regular commute, the Vitus Razor W delivers that same sensation of speed and freedom. And it never gets old. At every level, a road bike should be nimble and comfortable. It should build confidence with stable handling and be equipped with reliable components. The Razor brings the recognisable sleek lines of a lightweight road bike to the everyday cyclist. A closer look sees a high-quality double-butted aluminium frame paired with a lightweight carbon fork. The traditional rim brakes are easy to maintain and the robust 28mm tyres feel stable and grippy. The addition of mudguard mounts and internal cable routing will protect you and the bike from dirt coming up off the road and the 8-speed Shimano Claris gearing offers plenty of range for encounters with hills. This particular model is equipped with a women-specific Vitus saddle, smaller size range and narrower handlebars. The Razor is an honest, reliable road bike that is a great option for both newcomers to the sport or those looking for something robust and nippy for training and commuting. Key Features: Razor Platform: Sporty, comfortable and durable road bike Frame Material: 6061-T6 Double Butted Aluminium Wheel Size: 700c Intended Use: Road - Performance Sporty looks and a comfortable riding position 6061 T-6 double-butted aluminium frame with carbon fork Tapered head tube and fork steerer Internal cable routing Shimano Claris R2000 drivetrain Vitus wheels and fast, comfortable 28mm tyres Features: Frame: Razor Aluminium, 6061-T6 Double Butted Aluminium, Rim Brake, Internal Cable Routing, Mudguard Mounts, 130mm QR Axle Fork: Razor Carbon, UD Carbon, Tapered Aluminium Steerer, QR, Mudguard Mounts Headset: ACROS Aix 322 R3, Sealed Bearings, OD46, 1 1/8” – 1 ½”, 41.8 / 28.6 – 52 / 40 Handlebar: Vitus 6061 Aluminium, 72mm Reach, 120mm Drop, XXS:380mm XS:380mm S:380mm M:400mm L:420mm Stem: Vitus 6061 Aluminium, Bar Bore 31.8mm, +/- 7 degrees, XXS:70mm XS:70mm S:80mm M:90mm L:110mm Grip(Tape): Vitus, EVA Cork Wheelset: Vitus, 700c, Rim Brake, HG Freehub, QR Axles F/rim: Vitus Shining, A-X240, 700c, 24 Hole, Eyelets R/rim: Vitus Shining, A-X240, 700c, 28 Hole, Eyelets F/hub: Vitus KT, 515F, 24 Hole, QR R/hub: Vitus KT, GTER, 28 Hole, QR, HG Freehub F/tyre: Kenda Kwick Roller Sport, 700c x 28c R/tyre: Kenda Kwick Roller Sport, 700c x 28c Chain: KMC HG-40, 8 Speed Crankset: Prowheel Ounce, 50/34T, 8 Speed, XXS:165mm XS:165mm S:165mm M:170mm L:175mm Bottom Bracket: Cartridge Square Taper, BSA Threaded, 68mm, English F/brake Set: Tektro R317, Dual Pivot, Long Reach R/brake Set: Tektro R317, Dual Pivot, Long Reach F/derailleur: Shimano Claris R2000, FD-R2000, Braze-On, 2 x 8 Speed R/derailleur: Shimano Claris R2000, RD-R2000, 8 Speed L/shifter: Shimano Claris R2000, ST-R2000-L, 2 x 8 Speed R/shifter: Shimano Claris R2000, ST-R2000-R, 8 Speed Freewheel: Sunrace M66, 8 Speed, 11-32T Saddle: Vitus, Steel Rail Seat Post: Vitus 6061 Aluminium, 27.2mm x 350mm, 12mm Offset Seat Screw: Aluminium 31.8mm, Stainless Steel Bolt Weight: Small: 9kg Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Energie 26 Kids features a strong and lightweight aluminium frame equipped with a 1x8-Speed Microshift R8 groupset and powerful Tektro disc brakes. It also rolls upon alloy Vitus wheels wrapped in Kenda Small Block Eight tyres and features a stylish and dependable Vitus finishing kit. As the appeal of cyclocross continues to grow, so more clubs and juniors are keen to have a go at this exciting discipline. But it’s not enough to simply scale down adult race bikes. The Vitus Energie Kids is a ground-up rethink of how a bike should be built for growing bodies, smaller hands and new young riders who are keen to practise their handling and control. Cyclocross is a great way for kids to quickly improve their riding skills - the tight corners, hills, mud and obstacles - and doing it on a bike that fits and feels right will fast-track their progression and confidence. Control is everything. The Energie Kids combines flat-mount disc brakes with short-reach shifters, ensuring that smaller hands always have their fingers in the right place for steering and braking. And for narrower shoulders, the handlebar is compact too, with a smaller drop and shorter reach to prevent the instability of over-stretching. 1.5-inch (38mm) Kenda tyres offer plenty of traction for wet days whether racing or simply enjoying a family ride, and bolt-thru axles really help to firm up the feel and efficiency of the bike. A single front chainring combines with a Microshift rear derailleur to keep the shifting light so that even when small hands are wrapped up in gloves on colder days, it’s easy for them to tap through the gears. As adults, we know how awkward and inhibiting it can be to ride a bike that doesn’t fit properly. That’s why everything about the Energie Kids is optimised - from the narrower bottom bracket area to relieve pressure on young hips to the short stem to improve the responsive handling. To have the most fun on a bike, to get the most out of it, to fall in love with riding bikes even, it needs to feel great. The Energie Kids is a cyclocross bike with features that give it the versatility to help your kids grow as riders whether on or off the race circuit. Key Features: CX Specific Build: Versatile and ready to tackle any surface Frame Material: 6061-T6 Aluminium Wheel Size: 26" Intended Use: Road - Cyclocross Lightweight 6061-T6 Aluminium frame CX specific build with race ready performance Huge mud clearance Microshift R9 9-Speed groupset Powerful and reliable cable disc brakes Features: Frame: Energie 26 Aluminium, 6061-T6 Aluminium, Disc Brake, Mudguard Mounts, Flat Mount,12mm x 142mm Hub Spacing, Axle Specifications: 160mm Length, 14mm Thread Length, M12xP1.5 Thread Pitch Fork: Energie 26 Aluminium, 6061-T6 Aluminium, 1 1/8” Steerer, Flat Mount, 100 x 12mm Axle Headset: Neco Semi-Integrated Threadless Headset, 1 1/8”, 44 / 28.6 – 44 / 30 Handlebar: Vitus 6061 Aluminium, Reach: 65mm, Drop: 100mm, Width: 360mm Stem: Vitus 6061 Aluminium, Bar Bore: 31.8mm, Length: 50mm Grip(Tape): Vitus, EVA Cork Wheelset: Vitus, 26", 6-Bolt Disc Brake, HG Freehub, 12mm x 100mm Front, 12mm x 142mm Rear F/rim: Vitus Shining, DB-M3, 26", 28 Hole R/rim: Vitus Shining, DB-M3, 26", 28 Hole F/hub: Vitus KT, XF1F-12, 28 Hole, 6 Bolt, 142 x 12mm R/hub: Vitus KT, M4ZR-C, 28 Hole, 6 Bolt, 100 x 12mm, HG Freehub F/tyre: Kenda Small Block Eight, 26" x 1.5" R/tyre: Kenda Small Block Eight, 26" x 1.5" Chain: KMC X9, 8 Speed Crankset: Prowheel C10Y, 32T, Crank Length: 165mm Bottom Bracket: Cartridge Square Taper, BSA Threaded, 68mm, English F/brake Set: Tektro MD-C510 Disc Brake, Flat Mount, Cable Actuated R/brake Set: Tektro MD-C510 Disc Brake, Flat Mount, Cable Actuated Rotors: Tektro TR160 and TR140, Front: 160mm, Rear: 140mm R/derailleur: Microshift R9, RD-R43M for 8/9/10 Speed R/shifter: Microshift R8, SB-R480, 8 Speed Freewheel: Microshift R8, CS-H081, 8 Speed, 11-34T Saddle: Vitus, Steel Rail Seat Post: Vitus 6061 Aluminium, 27.2mm x 350mm Seat Screw: Aluminium 31.8mm, Stainless Steel Bolt Weight: 10.9kg Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Attaching to the roof or trunk of your car, as well as the back glass found on SUVs, this efficient holder uses four vacuum cups to lock itself firmly in place, for a tool-free and easy to fit performance. Built from a 3/4" thick HDPE and featuring two 6” Rear Wheel Straps, two Delta Hitch Pro heavy-duty fork mounts for 9mm dropouts and a 5g Lube Tube for maintaining the vacuum pump, it has everything you need for safe and secure, dual-bike portability.
Specifically engineered for modern hard-hitting enduro and trail bikes, this Super Deluxe Ultimate rear shock features the ride tuning abilities of a DebonAir air spring with both compression and rebound adjustment to fine-tune to any trail. With a solid threshold adjustment for pedalling performance and Maxima Plush fluid for a buttery smooth feel, riders can now easily dial in a podium-worthy ride. Trail Ready Rear Shock Truly worthy of the latest "super bikes" and changing up the course for rear shocks. Rampant rock gardens, greasy half exposed roots, soft banked corners, loamy goodness — if there was a Holy Grail of shock control — it would be right here with the Super Deluxe family of shocks. Maxima Plush Fluid Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures. Technologies: DebonAir: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. RCT Damper: Separate and independent Open and Threshold pistons tuned exactly for your ride. SAG Gradients: Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won’t find this anywhere else but RockShox. Maxima Plush Fluid: Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures. MEGNEG: The MegNeg (aka Mega Negative) aftermarket air can provides better small bump compliance, reduces the amount of force it takes to get into your bike’s travel, and is harder to bottom out than the standard air can. Counter Measure: Counter Measure reduces the breakaway force of the shock to virtually zero pounds, transforming small bumps into traction-generating performance.
The Cube Acid 240 SL is a lightweight, durable and stylish kid's that's ideal for trail riding over rough terrain and efficient cycling anywhere. It features an aluminium frame with a rigid alloy fork and is equipped with powerful V-Brakes and 1x9-Speed drivetrain with a wide-ranging 11-42T cassette. Suited to climbing steep hills and descending fast trails in all-weather conditions, this bike is a sensational off-road bike for junior MTB enthusiasts. Stable, Efficient and Enjoyable Off-Road Trail Bike Designed for ease of use, this reliable model's Prowheel crankset and MicroShift cassette allows your child to pedal up to speed in seconds. When cornering and tackling steep descents, its V-Brakes provide superb stopping power and control. One final highlight is this SL version comes complete with reflectors and a bell, so your young rider will have everything they need to ride confidently in all conditions. Lightweight, Durable and Easy to Control Hardtail Simplicity can be a virtue. With the Cube Acid 24 SL, they looked at what a keen young mountain biker really needed from a bike - low weight, safe handling and reliable components - and stuck to those principles. That's why it features a lightweight alloy fork, light and simple rim brakes, and a wide-ranging 1x9 transmission with a low enough gear to tackle even tough climbs. We even fitted a thinner handlebar and grips, so that small hands have full control on any trail. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Developed with Team Spectra in search of the marginal gains that could help them in some of the UK's biggest races, this rear wheel is designed for flat time trial/triathlon races and riding. Boasting a reliable carbon rim construction, it offers a superior strength to weight ratio so you can enjoy its fantastic speed, smooth-rolling performance and versatility on your ride. Topped off with a new SR1 CNC machined 6061 alloy hub and upgraded rim graphics, this is a perfect upgrade for powering you to the finish line with precision. Wider = Improved Performance The Prime Primavera 60 Carbon Rear Wheel features a 60mm deep aero rim profile, meaning you get more speed for the same effort. A wider rim profile creates a more linear contour with the tyre to increase the Primavera 60's aerodynamic properties. Greater Strength To Weight Ratio Built-up using an SR1 CNC machined 6061 alloy hub body and DT Swiss straight pull spokes, the Prime Primavera 60 Carbon Rear Wheel creates a stiffer wheel with a greater strength to weight ratio and more reactivity. Its Star Ratchet hub also provides superior reliability, due to each of the ratchets engaging simultaneously every time. Prime has also ensured that tool free freehub conversion is possible. Coming kitted out with an incorporated notch, the newly developed shape of the end caps simplifies disassembly significantly and therefore makes maintenance even easier. Aero Advantage If you're looking for an advantage in your next road race, criterium, TT or Tri event, the Prime Primavera 60 Carbon Wheel is the ultimate choice. Lightweight Rim Prime has experimented with numerous types of resin and tested countless new lay ups before they settled on the new and improved Primavera 60 rim. But, that’s not all, they’ve upgraded to a higher grade of carbon, saving precious grams, and improving on the impact strength/weight ratio making the new Primavera 60 the brand's best rim yet. In The Box: 4 Spare Spokes & Nipples Tubeless Valves QR Skewers 10 Speed Spacer Prime Carbon Brake Pads Spares (available separately) 54 Tooth Star Ratchet Upgrade Kit Black One Size SR Hub Bushing Black 12mm Star Ratchet Grease Neutral <100ml SR1 Rear Axle Silver QR SR1 Rear End Caps Black QR SR Freehub Body - Campagnolo Black 9/10/11 Speed SR Freehub Body - Campagnolo 13 Speed Black 13 Speed SR Freehub Body - Shimano Black 9/10/11 Speed SR Freehub Body - XDR Black 12 Speed Prime Crash Replacement Programme At Prime we understand that a crash or unexpected accident may occur under normal riding conditions. If in the event of a fall or accident where your Prime product sustains damage beyond repair, you can return the damaged component in exchange for a new product at 40% off the RRP. Please note that the Prime Crash Replacement Programme is only valid for the original purchaser within 2 years of purchase.