The Topeak Pakgo X is the ultimate bike travel case. It comes with a mounting system that converts to a mini-workstand, all the protective sleeves you need and two wheel bags.Mounting system converts to mini-workstand and allows easy re-assembly and fine tuningDrivetrain cover protects crankset, chain and rear derailleur from scratches and grease stains. Protective sleeves and frame pads prevent abrasion on frame from other components and helps keep them secureIncludes 2 wheel bags (Tyre size up to 26 x 2.35 or 700 x 40C)Includes a built-in TSA lockReserved name tag for personalizationFour large ø60 mm multi-directional wheelsCarry handles for easy transportFour bumpers on each side protects case from ground contact when openedInner mesh pockets keep tools and gear organizedPadded foam case offers impact protectionAn easy to pack / unpack bike transport system featuring a lightweight and flexible Makrolon polycarbonate shell with high-impact strength and reinforced with an aluminum mounting system. The upright case design with four large ø60mm multi-directional wheels delivers luggage-like ease while rolling and includes carry handles and a built-in TSA lock for safe and secure transport. Two wheel bags, protective sleeves, and drivetrain cover provide protection against scratches and grease stains while inner pockets help keep your gear organized all the way to your final destination. When you arrive, the mounting system unfolds to form a mini workstand to hold your frameset steady during re-assembly and fine tuning.Specification:Capacity: Fits most bikes with wheelbases up to 112 cm / 44 , Not compatible with 27.5 & 29 bikesMaterial: 100% Makrolon polycarbonate shell / Reinforced aluminum internal frameCompatibility: Front: Compatible with QR skewer or 12 mm x 100 mm thru axle (Road bike disc)Rear: Compatible with 130 / 135 mm QR skewer or 12mm thru axlesAdded Features: Upright case design, TSA lock, Carry handles, Four large ø60mm multi-directional wheels, Inner pocketsIncludes frameset mounting system, 2-wheel bags, Drivetrain cover, Protective sleeves, and Protective frame pads for frame tubes and fork bladesSize: 127 (H) x 85 (L) x 35 (W) cm / 50 (H) x 33.5 (L) x 13.8 (W)Weight: (APPROX)10 kg / 22 lb (Case only) / 12.8 kg / 28.2 lb (With component protective covers)Max Mini-Stand Capacity: 17 kg / 37.5 lb.
The new GRX wheel supports gravel rides that are faster, further, and more fun. Wider tyres need wider rims to maintain lateral tyre stability at low air pressures. Shimano studied the complicated relationship between tyre size, rim width, air pressure, and tyre lateral rigidity to optimize the GRX rim width for 32-50c tyres. In addition, we pursued the best balance of rim weight, strength, and profile in order to deliver an exceptional gravel wheel.RX870 gravel tuned 12/11-speed 700c tubeless wheelset offering all the technology of Shimano wheels balancing the best combination of rim weight and strength to deliver an exceptional gravel wheelset32mm high profile full carbon rim for improved aero dynamics and durability25mm internal rim width to accommodate a wider section tyre from 32-50mmEasy to use Centre Lock rotor mount for use with disc brakes24 stainless steel butted and bladed straight pull spokes with a 2-cross lacing pattern improve lateral and torsional (power transmission) rigidityElbow-less spokes with alloy nipples make for a strong yet compliant wheelThe hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenanceFree hub utilising a pawl ratchet engagement for precise pick upLabyrinth and contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothnessE-thru axle front 100mm rear 142mmWeight front 639gms rear 822gms
The Zipp 202 Firecrest Tubeless Disc Brake Wheels harnesses high technology for high adventure. This wheel is tubeless ready for road riding that doesn t always stay on smooth pavement.New logo and graphics that scream speedFirecrest rim Technology provides world class handling and stabilityTo ensure compatibility with any bike, our versatile ZR1 hubs come with swappable end caps to work with QR s and thru-axlesTubeless ensuring secure performance even when ridden at lower tyre pressures.The Zipp 202 Firecrest Tubeless retains its 32mm rim depth for a classic feel with real aero benefits. The wheel s 21mm internal width is aerodynamically optimised for use with 28mm wide tyres. Its tubeless design lets you run lower tyre pressures for improved grip and rolling resistance without the risk of pinch flats. At the centre of the 202 Firecrest Tubeless Disc-brake is a durable and versatile new hub set. The ZR1 DB hub offers greater bearing durability and quicker engagement with a Centre locking brake interface.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 32mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 21mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColour (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tyre pressure: 100psiMax recommended rider weight: 250lbs
What use is full power if it is not steered in the right direction For this reason, Cube have equipped the brand new Aim SL with a smooth and reliable damping 100mm travel in the form of a RockShox fork including a lockout function. In a team with powerful hydraulic disc brakes from Shimano, a confined head tube and grippy 2.25 inch wide Schwalbe tyres, full control is always guaranteed, no matter where in the terrain. The wide range of 2x9 gears from Shimano delivers the perfect gear at the touch of a finger and thus the perfect gear ratio on all trails. And because the cables have been relocated inside the frame, it can even be retrofitted with a dropper seat post. What are you waiting for Get on and off you go!Aluminium Lite frame, AMF, Double Butted with internal cable routingRockShox Judy Silver TK Coil with 100mm travel & lockoutShimano 2x9 speed drivetrainPowerful Shimano hydraulic disc brakesSchwalbe Smart Sam tyres 2.25NB: XS and S sizes use 27.5" wheels, M, L, XL and XXL sizes use 29" wheelsSize Chart:
What use is full power if it is not steered in the right direction For this reason, Cube have equipped the brand new Aim SL with a smooth and reliable damping 100mm travel in the form of a RockShox fork including a lockout function. In a team with powerful hydraulic disc brakes from Shimano, a confined head tube and grippy 2.25 inch wide Schwalbe tyres, full control is always guaranteed, no matter where in the terrain. The wide range of 2x9 gears from Shimano delivers the perfect gear at the touch of a finger and thus the perfect gear ratio on all trails. And because the cables have been relocated inside the frame, it can even be retrofitted with a dropper seat post. What are you waiting for Get on and off you go!Aluminium Lite frame, AMF, Double Butted with internal cable routingRockShox Judy Silver TK Coil with 100mm travel & lockoutShimano 2x9 speed drivetrainPowerful Shimano hydraulic disc brakesSchwalbe Smart Sam tyres 2.25NB: XS and S sizes use 27.5" wheels, M, L, XL and XXL sizes use 29" wheelsSize Chart:
What use is full power if it is not steered in the right direction For this reason, Cube have equipped the brand new Aim SL with a smooth and reliable damping 100mm travel in the form of a RockShox fork including a lockout function. In a team with powerful hydraulic disc brakes from Shimano, a confined head tube and grippy 2.25 inch wide Schwalbe tyres, full control is always guaranteed, no matter where in the terrain. The wide range of 2x9 gears from Shimano delivers the perfect gear at the touch of a finger and thus the perfect gear ratio on all trails. And because the cables have been relocated inside the frame, it can even be retrofitted with a dropper seat post. What are you waiting for Get on and off you go!Aluminium Lite frame, AMF, Double Butted with internal cable routingRockShox Judy Silver TK Coil with 100mm travel & lockoutShimano 2x9 speed drivetrainPowerful Shimano hydraulic disc brakesSchwalbe Smart Sam tyres 2.25NB: XS and S sizes use 27.5" wheels, M, L, XL and XXL sizes use 29" wheelsSize Chart:
The Thule 933 EasyFold 2-bike cycle carrier has all of the great features you would expect of a flagship Thule carrier but with the added advantage of a folding mechanism for easier storage and carrying. When folded, the dimensions are just 633 x 310 x 680mm, meaning the EasyFold will fit easily into most car boots when not in use. The carrier features a foot operated smart tilt function which enables you to access your boot without the need to remove the carrier or bikes. Another great feature is AcuTight Torque knobs which click when optimum tension is reached, which is great for protecting lightweight bikes from excessive clamping force. Built out of lightweight aluminium, the EasyFold carrier is impressively strong and rigid, with a maximum weight capacity of 60kg. The EasyFold carrier locks directly to the towball to prevent against theft and features a foot operated smart tilt function which enables you to access your boot without the need to remove the carrier or bikes. 13 pin power socket and additional rear numberplate for installationSuitable for 2 bikesLoad capacity (kg): 60kgMax bike weight: 30kgLength: 123cmWidth: 61cmWeight: 17.1kgCovered By Thule's 5-Year Warranty
A lifetime of mountain biking starts with a first, a bike that will look after you on your journey and won t limit your adventures. The Orbea Onna is the ideal companion for any rider who is learning to love mountain biking, with a perfect blend of efficiency, comfort, and control.Light and capable alloy XS frameNimble 27.5 wheels for junior ridersPlush SR Suntour XCE 28 Coil 100mm forksSmooth and reliable Shimano 2x8 gearingPowerful Shimano hydraulic disc brakesSize Chart:
Got an off-road itch that needs scratching The Aim Pro could be the relief you're looking for. With its grippy tyres and 100mm suspension fork, it's got the comfort and control you'll need to keep riding when you reach the end of the road. Aluminium Lite, AMF, Double Butted, Internal Cable Routing, Tapered Head Tube, Flat Mount Brake, SIC Mount, FM Kickstand MountSR Suntour XCT Disc, 100mm suspension fork2 x 8 Speed Shimano drivetrainTektro hydraulic disc brakesCube Impac Smartpac, 2.25 tyresWide-ratio Shimano 2x8 gears will help you see off the steepest climbs, and strong hydraulic brakes put you in control on the descents. Best of all, SizeSplit makes it easy to find the perfect fit for every rider and the frame is even ready to accept a future dropper post upgrade.Beauty is more than skin deep: the Aim's sleek looks are thanks to its smooth-welded head tube and seat tube junctions. It incorporates a threaded bottom bracket and internal cable routing for long-lasting service and simple maintenance. There's even a flat disc mount that integrates seamlessly with Cube s kickstand mount, and integrated mounting points for ACID mudguards and carrier. Updated geometry includes a lower top tube for more confident handling, and there's plenty of room to run wide, grippy and comfortable 2.25in tyres. Cube s SizeSplit system has an expanded range, too, so however tall you are there'll be an Aim that fits perfectly.Size Chart:
Got an off-road itch that needs scratching The Aim Pro could be the relief you're looking for. With its grippy tyres and 100mm suspension fork, it's got the comfort and control you'll need to keep riding when you reach the end of the road. Aluminium Lite, AMF, Double Butted, Internal Cable Routing, Tapered Head Tube, Flat Mount Brake, SIC Mount, FM Kickstand MountSR Suntour XCT Disc, 100mm suspension fork2 x 8 Speed Shimano drivetrainTektro hydraulic disc brakesCube Impac Smartpac, 2.25 tyresWide-ratio Shimano 2x8 gears will help you see off the steepest climbs, and strong hydraulic brakes put you in control on the descents. Best of all, SizeSplit makes it easy to find the perfect fit for every rider and the frame is even ready to accept a future dropper post upgrade.Beauty is more than skin deep: the Aim's sleek looks are thanks to its smooth-welded head tube and seat tube junctions. It incorporates a threaded bottom bracket and internal cable routing for long-lasting service and simple maintenance. There's even a flat disc mount that integrates seamlessly with Cube s kickstand mount, and integrated mounting points for ACID mudguards and carrier. Updated geometry includes a lower top tube for more confident handling, and there's plenty of room to run wide, grippy and comfortable 2.25in tyres. Cube s SizeSplit system has an expanded range, too, so however tall you are there'll be an Aim that fits perfectly.Size Chart:
Got an off-road itch that needs scratching The Aim Pro could be the relief you're looking for. With its grippy tyres and 100mm suspension fork, it's got the comfort and control you'll need to keep riding when you reach the end of the road. Aluminium Lite, AMF, Double Butted, Internal Cable Routing, Tapered Head Tube, Flat Mount Brake, SIC Mount, FM Kickstand MountSR Suntour XCT Disc, 100mm suspension fork2 x 8 Speed Shimano drivetrainTektro hydraulic disc brakesCube Impac Smartpac, 2.25 tyresWide-ratio Shimano 2x8 gears will help you see off the steepest climbs, and strong hydraulic brakes put you in control on the descents. Best of all, SizeSplit makes it easy to find the perfect fit for every rider and the frame is even ready to accept a future dropper post upgrade.Beauty is more than skin deep: the Aim's sleek looks are thanks to its smooth-welded head tube and seat tube junctions. It incorporates a threaded bottom bracket and internal cable routing for long-lasting service and simple maintenance. There's even a flat disc mount that integrates seamlessly with Cube s kickstand mount, and integrated mounting points for ACID mudguards and carrier. Updated geometry includes a lower top tube for more confident handling, and there's plenty of room to run wide, grippy and comfortable 2.25in tyres. Cube s SizeSplit system has an expanded range, too, so however tall you are there'll be an Aim that fits perfectly.Size Chart:
Got an off-road itch that needs scratching The Aim Pro could be the relief you're looking for. With its grippy tyres and 100mm suspension fork, it's got the comfort and control you'll need to keep riding when you reach the end of the road. Aluminium Lite, AMF, Double Butted, Internal Cable Routing, Tapered Head Tube, Flat Mount Brake, SIC Mount, FM Kickstand MountSR Suntour XCT Disc, 100mm suspension fork2 x 8 Speed Shimano drivetrainTektro hydraulic disc brakesCube Impac Smartpac, 2.25 tyresWide-ratio Shimano 2x8 gears will help you see off the steepest climbs, and strong hydraulic brakes put you in control on the descents. Best of all, SizeSplit makes it easy to find the perfect fit for every rider and the frame is even ready to accept a future dropper post upgrade.Beauty is more than skin deep: the Aim's sleek looks are thanks to its smooth-welded head tube and seat tube junctions. It incorporates a threaded bottom bracket and internal cable routing for long-lasting service and simple maintenance. There's even a flat disc mount that integrates seamlessly with Cube s kickstand mount, and integrated mounting points for ACID mudguards and carrier. Updated geometry includes a lower top tube for more confident handling, and there's plenty of room to run wide, grippy and comfortable 2.25in tyres. Cube s SizeSplit system has an expanded range, too, so however tall you are there'll be an Aim that fits perfectly.Size Chart:
Zipp s 303 Firecrest Tubeless Disc-brake Front Wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durabilityShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): FrontSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHubZ: R1 Disc BrakeDriver body type: n/aColour (hub): BlackAxle type (Wheels): TA 12x100Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: n/aDriver body material: n/aMax tyre pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 613Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to run regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
The Fenix 6X Pro GPS Watch is the next generation of ultimate outdoor GPS smartwatches. Built on the exploits of athletes and adventurers, the Fenix 6 Pro Series is for those who push past limits and redefine expectations. Extremely Rugged: With their ultra-tough construction all Fenix models are tested to U.S. military standard 810 for thermal, shock and water resistance. Fibre-reinforced polymer body with metal rear coverMulti GNSS: Access multiple global navigation satellite systems (GPS, GLONASS and Galileo) to track in more challenging environments than GPS alonePacePro: A first-of-its-kind PacePro feature helps keep you on pace with grade-adjusted guidance as you run a coursePulse Ox: For altitude acclimation or sleep monitoring, a Pulse Ox2 sensor uses light beams at your wrist to gauge how well your body is absorbing oxygenPerformance Metrics: View advanced training metrics that include running dynamics, heat- and altitude-adjusted VO2 max, recovery advisor and more1Climb Pro: Use ClimbPro ascent planner to see real-time information on your current and upcoming climbs, including gradient, distance and elevation gainBody Battery: Optimise your body energy reserves, using heart rate variability, stress, sleep and other data to gauge when you re ready to be active or when you may need to restConnected Features: Bluetooth sensor support, Wi-Fi, smart notifications, control and play music, ANT+, LiveTrack and moreMusic: Store up to 2,000 songs, or access streaming apps from compatible services, including Spotify, Deezer and Amazon Music, and listen through headphones with BLUETOOTH technologyTrendline Intelligence: Used for routing to assure that you ride and run where the locals go, now also available as one of the map overlays for better guidance during your activities.Garmin Pay: Breeze through checkout lines with Garmin Pay contactless payment solution3 through participating providers such as Mastercard and VisaBattery Life: 6X - smartwatch 21 days, GPS up to 60h, max 120h, Battery saver 80 daysWater Rating: 10 ATM/100 metresWith an all new exciting performance design the Fenix 6X Pro comes with cutting edge feature levels and significantly improved battery life. These rugged, tech-rich wearables are built to take on any challenge and fit any active lifestyle, with enhanced wrist heart rate, Pulse Ox, outdoor navigation sensors, built-in activity profiles, a new power management feature, performance metrics, contactless payments, smart notifications and more. Optimised for the outdoors they are available with sunlight-readable always-on displays with the 6X featuring the larger 1.4-inch display which is 36% larger than previous Fenix models.
Thule's most versatile and robust all round rack, the VeloSpace XT is a premium offering designed to take the most awkward loads such as E-bikes and Downhill MTB rigs.Extra long wheel cradles can handle bikes with a wheelbase of up to 130 cm and an extra wide spacing between the bikes means that extra wide dropouts, forks, handlebars and bottom brackets are less of an issue. Adjustable pump buckles with longer straps give greater adjustability and allow for easy fastening of wheels (up to 4.7'' wheels) enabling transport of fat bikes.The carrier features a foot operated smart tilt function which enables you to access your boot without the need to remove the carrier or bikes. Wide angle tilt means that boot access is possible even on VW vans whose tailgates foul on standard tilting racks. Another great feature is AcuTight Torque knobs which click when optimum tension is reached, which is great for protecting lightweight bikes from excessive clamping force.Thule's one key system lock cylinders allow you to lock your bikes to the bike carrier and your carrier to the tow hitch. Combine with Thule BackSpace XT to create an all-round cargo carrier, giving the car 300L of easily accessed, extra loading space.Carries 3 BikesTowball MountingPre-Assembled, No Tools RequiredLoad Capacity: 60 kgMax Bike Weight: 30 kgDimensions: 135 x 69 x 79 cmFolded Dimensions: 135 x 74 x 25 cmWeight: 18.7 kgCity Crash Test CompliantCovered By Thule's 5-Year Warranty
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.