The BBB Rollerboys Jockey Wheels are made from composite material provided by EMS Swiss, with 40% glass-fiber mixture. A complete set of bushings for different shifting systems is included.Options:10T - Compatible with Shimano 7 and 8-speed; Campagnolo 8, 9 and 10 speed; SRAM 9.0( 97/ 98), 9.0SL( 98), 7.0( 97/ 98) and 5.0( 98/ 99).11T - Compatible with Shimano 9, 10 and 11-speed / Mega Range and Campagnolo 11 speed11T SRAM - Compatible with the following SRAM systems: 9.0SL ( 01/ 02), 9.0 ( 03), X.9 ( 04), X.O, Force and Rival.12T Compatible with SRAM
The Flow Cage SL is constructed of fibre reinforced Composite Matrix material for an exceptional strength to weight ratio and features an optimised side-load shape for easy bottle access in compact frames as well as oval mounting holes allow fine tuning for perfect positioning. The Flow Cage Side Load offers the perfect to solution to an easily accessible water bottle on a compact frame. High strength composite matrix materialWeight: 48gNB: Cage is left-handed entry, not right as shown.
Carbomove from Effetto Mariposa is a release spray, acting at the same time as penetrating oil and as powerful solvent. It s a great ally to free blocked components.Carbomove is very effective to free any blocked component of the bikeIt s the last resort to remove blocked aerodynamic seat-postsEasily cleans Carbogrip tracesDoesn t damage carbon composites or metalsWhen to use it: If the bicycle components have been mounted professionally, using Carbogrip or other specific assembly products, it's quite easy - for example - to modify the saddle height, even after some time. On the other hand, if the components have been assembled dry or not with the right products, repositioning or removing them can be a real challenge. There are ways to resolve the problem, but they all involve the use of brute force. Carbomove is a great help even in desperate cases, penetrating between the surfaces and facilitating their movement.Typical applications:Removal of a seat-postRemoval of threaded bottom bracketsRemoval of aerodynamic extensions from their clampsRemoval of traces of glue from the frame (vinyl stickers)Removal of CarbogripExample - Using Carbomove for a seized seat-post:Create a funnel by wrapping the seat tube with packing tape, leaving it open around the seized seat-postSpray abundantly Carbomove inside the funnel, in order to have the interface between seat-post and seat tube constantly moistenedLet it rest for a few hours. If needed, spray more Carbomove if neededCheck if the seat-post starts to move. If it s still stuck, repeat from #2The length of insertion of the seat-post into the bicycle frame heavily affects the duration (and success) of the operation: if the seat-post is inserted for more than 20 cm, the task becomes very difficult. It is sometimes useful to turn the bicycle upside down, remove the bottom bracket and spray Carbomove inside the frame from there.The worst case scenario is with aerodynamic seat-posts, whose section is not round. This means that their components cannot be twisted. In this case, Carbomove is the best and only option.
Caliper piston kit for Avid Elixir hydraulic disc brakes. Note: Not suitable for OE Elixir 4 brakes which use Avid Juicy Calipers.
The DMR Flip Pins for Vault Pedals come with 2 varieties. 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. There's also a 2mm allen wrench included.
The DMR Flip Pins for Vault Pedals come with 2 varieties. 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. There's also a 2mm allen wrench included.
This updated cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs. It now also fits the SRAM XX1 11-speed cassettes.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsGuide pin helps to hold the cassette tool in placeThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
The LifeLine Digital Pressure Gauge provides exceptional accuracy and hassle-free performance. Enabling to you achieve the perfect pressure rating for your tyres, it not only can give you an accurate pressure reading within 3 seconds but is compatible with Presta and Schrader valves while also featuring a 'Bleed Valve' enabling you to fine-tune the inflation.Max Pressure: 160 psiValve Type: Presta & SchraderPressure Adjustment: Bleed ValveInflation Units: PSI, BAR, KPA, KG CM2Display: LCD BacklitPower Saving: Auto Power-OffTo increase accuracy and functionality even further it features both 'Calculation Mode' enabling you to measure the inflation of the tyre and 'Adjustment Mode', which allows accurate pressure measurement as you use the bleed valve to achieve the perfect inflation value.
The DMR Flip Pins for Vault Pedals come with 2 varieties. 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. There's also a 2mm allen wrench included.
The DMR Flip Pins for Vault Pedals come with 2 varieties. 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. There's also a 2mm allen wrench included.
The DMR Flip Pins for Vault Pedals come with 2 varieties. 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. There's also a 2mm allen wrench included.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Stackers are compatible with R1 Aero, R1 Track bars and TR2 clip on bars. Constructed of aluminium they have an anodised finish. Available in 10 or 20mm. They are supplied in pairs and include dowels.Compatible with R1 Aero, R1 Track bars & TR2 clip on bars Includes dowels