Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Just drop in! The EVOC Ride Performance 8 Backpack + 2L Hydration Bladder is a versatile mountain bike allrounder with comfortable back padding and is at home on all trails, but just as much in school, uni or your regular daily routine. Includes a 2L hydration bladder to keep you hydrated and and exterior flap to store your helmet.Intelligently positioned pockets offer a lot of storage spaceInternal tool compartment with organiser functionalityExterior transport flap for your bike helmetVolume: 8LWeight: 500gMeasures: 24 x 43 x 8cm
Just drop in! The EVOC Ride Performance 8 Backpack + 2L Hydration Bladder is a versatile mountain bike allrounder with comfortable back padding and is at home on all trails, but just as much in school, uni or your regular daily routine. Includes a 2L hydration bladder to keep you hydrated and and exterior flap to store your helmet.Intelligently positioned pockets offer a lot of storage spaceInternal tool compartment with organiser functionalityExterior transport flap for your bike helmetVolume: 8LWeight: 500gMeasures: 24 x 43 x 8cm
Di2 charger for the internal battery that will keep your Di2 system shifting. Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger.1.5 hour charge timePlugs in directly to the SM-EW90 handlebar junction ACan also be used for completing firmware updates when linked to E-tube software on your PCPlease note: Does not include power lead
The popular Altura Dryline range has been brought up to date with a fresh new look and the introduction of 100% polyester with recycled content. Yet it still retains its tough water-resistant features, high quality Rixen & Kaul fittings and patented Dryline taped lining to help keep your belongings dry.100% Polyester with recycled contentWaterproof inner drybagRixen Kaul Klickfix Pannier fittingLower kickplateZipped lid pocket with key clipAdjustable, removable shoulder strapDual SR buckle closureThree side stash pocketsInternal patented Dryline taped liningMolle webbing compatible with Altura Anywhere DrybagsLight loopsWeight: 950g eachDimensions: 27x13x36cmTotal Capacity: 32 LitreReady for adventuring the Altura Dryline 32 Waterproof Cycling Panniers are a compact 32L pannier set perfect for adventures with a water-resistant finish, zipped lid pocket, two side stash pockets and Molle webbing compatible with Altura Anywhere Drybags. A smart Rixen & Kaul Klickfix fitting allows for a quick attachment and removal for use off the bike as a shoulder bag thanks to an adjustable, removable shoulder strap and can be used with most racks. Complete with a reinforced lower kickplate to avoid damage to the base of the bag.
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience and shifting security and precision on mixed terrain.Adjustable chain stabilizer prevents chain slapping and dropsSwitch stabilizer ON/OFF to match the terrainSilent and uninterrupted rear shifting on rough terrainLow sprocket: Max. 34T/Min. 30T / Total capacity: 40TSmooth and reliable mixed surface shiftingCompatible with current road DUAL CONTROL LEVERMaximum front difference: 17T / Top sprocket: Max. 11T/Min. 11TFor rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain tensioner allowing you to adapt to the type of surface ahead. The adjustable chain stabiliser prevents chain slapping and drops and gives you silent and uninterrupted shifting on rough terrain.
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience and shifting security and precision on mixed terrain.Adjustable chain stabilizer prevents chain slapping & dropsSmooth and reliable mixed surface shiftingCompatible with current road dual control leverTop sprocket: Max. 11T/Min. 11TLow sprocket: Max. 42T/Min. 40TTotal capacity: 31TWith an integrated chain stabilizer mechanism, the SHIMANO GRX derailleur provides a quieter experience and shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features an ON/OFF switch for the chain tensioner. Its compatible with current road dual control lever and gives you precise shifting every time.
The new Ergon SM Men saddles are specifically tailored to the features of the male anatomy and optimized for the requirements of mountain biking. With the assistance of the latest scientific studies and intensive prototyping Ergon s interdisciplinary development team consisting of sports scientists, industrial designers, engineers and test riders have come up with a new generation of pressure-relief men s saddles. Relief Inlays: Increased comfort due to OrthoCell-Inlays in the seating area, which help distribute pressure betterLarge-Area Pressure Distribution: Perfect pressure distribution in the sit and pubic bones by means of a flat, even contact area and high-end padding foamsFlat Rear: The narrow, slightly inclining rear with a flat contour and a minimal ramp-up give great freedom of movement on the downhillsFlat contour: Due to the more upright pelvic orientation the saddle surface is flat with great freedom of movementShape: Through its Y-Shape the freedom of movement and legroom are maximized, while at the same time all bone structures are ideally supportedIntegrated Mount: Convenient removable mount for accessories like Topeak saddle bagsThe SM Men saddles effectively avoid discomfort and numbness for most applications in mountain biking for most types of mountain bike riders. The extremely deep and rearward increasing relief channel is complimented by a proper cut-out in the deepest spot. This construction combines all the benefits of a standard cut-out saddle without its drawbacks (often a very stiff shell) producing a particularly high degree of pressure relief of the sensitive perineal area. Exceedingly high pressures often are the cause for discomfort and numbness in the genital area.Shell: Nylon CompositeRails: TiNoxCover: MicrofibrePadding: Orthopaedic AirCell Foam with OrthoCell PadsWeight: 235g (S/M), 245g (M/L)Size guide:Small/Medium: 9-12cm Sit bone widthMedium/Large: 12-16cm Sit bone width
The Ergon design team has analysed the requirements of E-Mountain bikers in detail. Longer periods of sitting, steeper uphill s and greater levels of impact characterise the E-MTB experience. After intense development, the optimal saddle shape was found. The rear ramp better supports the rider in steep uphill riding situations when seated. The V-shape offers freedom of movement across the wide flanks up to the padded nose important for particularly steep climbs.Shell: Nylon CompositeRails: CroMoCover: MicrofibrePadding: Orthopaedic Comfort Foam with OrthoCell InlaysWeight: 335g (S/M), 350g (M/L)Sizing guide:Small/Medium: 9-12cm Sit bone widthMedium/Large: 12-16cm Sit bone widthSupporting Ramp: Strongly raised ramping for maximum support from behind helps stabilizing your position on the bike and saves energy when riding uphill.Soft Comfort Padding: Maximum comfort when seated due to a thicker padding even on long rides.Pronounced Relief Channel/Cut-Out: The Relief channel helps to avoid numbness and provides increased protection for soft-tissue areas. Specially adapted for men and women.Pressure Relief Inlays: More comfort thanks to the OrthoCell-Inlays in the seating area, which helps distribute pressure better.Wide Front: In particularly steep trail sections, the position often is shifted towards the front. That s why the E-Mountain s saddle nose is deliberately designed wide and comfortable.Integrated Mount: Convenient removable mount for accessories like Topeak saddle bags.
The Ergon design team has analysed the requirements of E-Mountain bikers in detail. Longer periods of sitting, steeper uphill s and greater levels of impact characterise the E-MTB experience. After intense development, the optimal saddle shape was found. The rear ramp better supports the rider in steep uphill riding situations when seated. The V-shape offers freedom of movement across the wide flanks up to the padded nose important for particularly steep climbs.Shell: Nylon CompositeRails: CroMoCover: MicrofibrePadding: Orthopaedic Comfort Foam with OrthoCell InlaysWeight: 335g (S/M), 350g (M/L)Sizing guide:Small/Medium: 9-12cm Sit bone widthMedium/Large: 12-16cm Sit bone widthSupporting Ramp: Strongly raised ramping for maximum support from behind helps stabilizing your position on the bike and saves energy when riding uphill.Soft Comfort Padding: Maximum comfort when seated due to a thicker padding even on long rides.Pronounced Relief Channel/Cut-Out: The Relief channel helps to avoid numbness and provides increased protection for soft-tissue areas. Specially adapted for men and women.Pressure Relief Inlays: More comfort thanks to the OrthoCell-Inlays in the seating area, which helps distribute pressure better.Wide Front: In particularly steep trail sections, the position often is shifted towards the front. That s why the E-Mountain s saddle nose is deliberately designed wide and comfortable.Integrated Mount: Convenient removable mount for accessories like Topeak saddle bags.
The new Ergon SM Men saddles are specifically tailored to the features of the male anatomy and optimized for the requirements of mountain biking. With the assistance of the latest scientific studies and intensive prototyping Ergon s interdisciplinary development team consisting of sports scientists, industrial designers, engineers and test riders have come up with a new generation of pressure-relief men s saddles. Relief Inlays: Increased comfort due to OrthoCell-Inlays in the seating area, which help distribute pressure betterLarge-Area Pressure Distribution: Perfect pressure distribution in the sit and pubic bones by means of a flat, even contact area and high-end padding foamsFlat Rear: The narrow, slightly inclining rear with a flat contour and a minimal ramp-up give great freedom of movement on the downhillsFlat contour: Due to the more upright pelvic orientation the saddle surface is flat with great freedom of movementShape: Through its Y-Shape the freedom of movement and legroom are maximized, while at the same time all bone structures are ideally supportedIntegrated Mount: Convenient removable mount for accessories like Topeak saddle bagsThe SM Men saddles effectively avoid discomfort and numbness for most applications in mountain biking for most types of mountain bike riders. The extremely deep and rearward increasing relief channel is complimented by a proper cut-out in the deepest spot. This construction combines all the benefits of a standard cut-out saddle without its drawbacks (often a very stiff shell) producing a particularly high degree of pressure relief of the sensitive perineal area. Exceedingly high pressures often are the cause for discomfort and numbness in the genital area.Shell: Nylon CompositeRails: TiNoxCover: MicrofibrePadding: Orthopaedic AirCell Foam with OrthoCell PadsWeight: 235g (S/M), 245g (M/L)Size guide:Small/Medium: 9-12cm Sit bone widthMedium/Large: 12-16cm Sit bone width
Shimano's RS300 wheels are crammed with technology from their high-end models, all of which comes at an incredible price. With a lightweight aluminium rim teamed to reliable and smooth rolling quick-release, cup and cone hubs, these are great value wheels for winter riding and training.Lightweight 24mm deep aluminium deep is stiff and responsive16 front/20 rear straight-pull spokes are light, durable, easy to replace and improve rigidityAngular contact bearing cup and cone hubs are supremely reliable and easy to maintainRear wheel is compatible with 8,9,10 and 11-speed Shimano/Sram cassettes to help ensure they fit most bikesSupplied with quick-release skewerThe RS300s feature a shallow 24mm aluminium that is lightweight and stiff, yet also provides a smooth, compliant ride. The wheels feature staggered spoke counts; the front has 16 spokes to keep weight low and compliance high, while the rear uses 20 spokes for improved power delivery while stiff offering a light, responsive feel and excellent compliance. These wheels are great for long distance winter rides. The wide 17mm internal width of the rim is also great for larger volume 25-28c tyres.The hubs use Shimano's legendary angular contact bearings that are supremely reliable, easy to maintain and allow precision bearing adjustment to help ensure they run smoothly and drag-free. Labyrinth and contact sealing use low-friction seals to effectively shut out water, mud and dirt as well as helping to keep the wheels feeling lively, with a fast, free-rolling nature.The freehub is compatible with 8, 9, 10 and 11-speed Shimano/Sram style cassettes, so you can be sure these will fit most road bikes. The wheels also come supplied with high-quality Shimano quick-release skewers that will provide years of smooth clamping, making sure your wheels stay tight in the frame and fork regardless of how hard you push them. Lightweight, great value and incredibly durable, Shimano's RS300 Wheels makes the perfect winter training wheels for gritty rides or turbo trainer use.
When winter comes you need shoes that are up to the job of keeping your feet warm and dry, now thanks to the MW5 (MW501) SPD MTB Shoes from Shimano that problem has been solved. These shoes are packed with technologies that are all geared towards keeping you comfortable during your winter rides.DRYSHIELD membrane with fleece liner keeps feet warm and comfortableInsole with fleece liner for added insulation and heat retentionSpeed lacing system allow fast, easy adjustments and a secure fitLace flap and neoprene ankle collar keep out water and dirtlightweight rubber outsole offers all-conditions traction and gripWeight: 390g (size 42)Every detail of the MW5 has designed to prevent the ingress of water and dirt, making winter rides far more enjoyable. To ensure the best possible performance in winter conditions Shimano have equipped the shoes with a DRYSHIELD membrane that keeps water, mud and cold winds from getting inside and with a fleece lining embracing your foot you'll also enjoy unrivalled warmth as temperatures drop. Speed lacing closure makes it easy to dial in the perfect fit and there's a lace flap to bring additional weather protection. An additional single Velcro strap towards the top of the foot allows you to snug the shoe down further. The two-bolt SPD cleat compatible sole ensures you can clip into your MTB pedals with ease and if you do have to hop off and push, then the durable rubber outsole provides plenty of grip.
When winter comes you need shoes that are up to the job of keeping your feet warm and dry, now thanks to the MW5 (MW501) SPD MTB Shoes from Shimano that problem has been solved. These shoes are packed with technologies that are all geared towards keeping you comfortable during your winter rides.DRYSHIELD membrane with fleece liner keeps feet warm and comfortableInsole with fleece liner for added insulation and heat retentionSpeed lacing system allow fast, easy adjustments and a secure fitLace flap and neoprene ankle collar keep out water and dirtlightweight rubber outsole offers all-conditions traction and gripWeight: 390g (size 42)Every detail of the MW5 has designed to prevent the ingress of water and dirt, making winter rides far more enjoyable. To ensure the best possible performance in winter conditions Shimano have equipped the shoes with a DRYSHIELD membrane that keeps water, mud and cold winds from getting inside and with a fleece lining embracing your foot you'll also enjoy unrivalled warmth as temperatures drop. Speed lacing closure makes it easy to dial in the perfect fit and there's a lace flap to bring additional weather protection. An additional single Velcro strap towards the top of the foot allows you to snug the shoe down further. The two-bolt SPD cleat compatible sole ensures you can clip into your MTB pedals with ease and if you do have to hop off and push, then the durable rubber outsole provides plenty of grip.
Introducing the Mallet Speed Lace MTB Shoes from Crank Brothers. These shoes are ideal for everything from Cross Country epics to Trail, Enduro and Downhill riding. They come with pre-installed cleat for use with Crank Brothers pedals and a straightforward Lace system to dial in the perfect fit.Outsole:Match Box optimised for any MTB pedalsRace Zone for control and stabilityRamp for easy clip-in / out and mud clearancePre-installed Match Shim for Crank Brothers pedalsPre-installed cleat for Crank Brothers pedalsMC1 mid-friction compound for easy exitDirectional angled & spaced toe / heel lugs for traction while hikingRamped toe for walkabilityStiff shank for power transferCushioned EVA midsole for shock absorptionUpper:Speed lace & strap for fast and secure adjustmentLace pocket for safety and styleVentilated windows with perforated mesh material for breathabilityPadded tongue for protectionTPU reinforced areas for protection and abrasion resistanceHeel dots for grip and superior heel holdHidden eyelets for durability and clean designThe Mallet Speed Lace has many great features to give you a premium quality mountain bike shoe. The Speed Lace fit system and strap allows for a perfect fit and there s also a padded tongue which adds protection and comfort. There s also TPU specific reinforced areas which gives you protection against debris and abrasion resistance. For added grip in difficult conditions there s directional angled and spaced heel and toe lugs for extra traction. A cushioned EVA midsole for shock absorption and a stiff shank for excellent power transfer gives a great balance between comfort and pedalling efficiency.