Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
The Versa is DMR s newest mountain bike pedal, featuring a clip in mechanism on one side and DMR s world famous platform on the other side.Versatile clip in one side, World famous DMR platform on the other sideLight 465g per pairSlim 14mm foot bedLow Profile For great clearanceTough Extruded 6061 Aluminium and 4140 CroMo Steel axlesTuneable 10 pins per Versa pedal. Optional pins included to fine-tune the gripServiceable High load DU bush and cartridge bearingNow you can ride up with the efficiency and control of being clipped in. At the top, flip the pedal and go fully foot out flat out on the way down. A clipless pedal and mtb flat pedal in one!
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
The Versa is DMR s newest mountain bike pedal, featuring a clip in mechanism on one side and DMR s world famous platform on the other side.Versatile clip in one side, World famous DMR platform on the other sideLight 465g per pairSlim 14mm foot bedLow Profile For great clearanceTough Extruded 6061 Aluminium and 4140 CroMo Steel axlesTuneable 10 pins per Versa pedal. Optional pins included to fine-tune the gripServiceable High load DU bush and cartridge bearingNow you can ride up with the efficiency and control of being clipped in. At the top, flip the pedal and go fully foot out flat out on the way down. A clipless pedal and mtb flat pedal in one!
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.