Peaty s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup Peaty s Rim Tape, MK2 Tubeless Valves and Holeshot Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Includes Peaty's latest silver-printed Tubeless Rim TapeBlack MK2 Tubeless Valves and Holeshot Biofibre Tubeless SealantPresented in specially-designed recycled packaging with a handy setup guide on the box and QR links to step by step videos for each stage of installationIdeal for riders wanting to spend more time on the bike and less time fixing puncturesPeaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: Road, Gravel, XC, Enduro, Downhill all good to go. Every conversion kit features a handy installation guide on the box, with QR links to step by step installation for each stage of installation rest assured that the installation process will be slick and swift.Available in 4 flavours:Road/Gravel: 21mm tape / 60mm valves / 120ml SealantXC/Trail: 25mm tape / 42mm valves / 240ml SealantDH/Enduro: 30mm tape / 42mm valves / 240ml SealantDH Wide: 35mm tape / 42mm valves / 240ml Sealant
The lightest Dynaplug yet, the Racer Ultralight Tyre Repair Kit uses tough glass-reinforced injected nylon construction to get the racer's already low weight down to a barely there 14 grams. Also included is a custom silicon holder, tested for a year in the back country of California and the UK, this lightweight mount fits under your bottle cage and holds your racer securely and rattle-free.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-rideWhen needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done!The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tapeNo need to remove the tyre, no messy glues or solvents, just plug and go, go, GO!The double-ended racer holds two preloaded insertion tubes; one with a standard soft nose plug for standard holes and one with an extra-large Megaplug for fixing more serious tyre damageEach is covered by a waterproof CNC'd cap, so the plugs are kept ready to go at a moment's notice, even after being strapped to your bike for monthsWeighs in at just 23 grams! so even the weeniest of weight weenies have no excuses. The 93 mm length is easy to store in a pocket or strapped to a frame for faster accessA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationKit includes the tool itself with both standard and mega plug stainless steel insertion tubes, 2 x Megaplugs and 3 x soft nose standard plugsMade with pride in the USA with patented technology and warrantied for life under normal usage
Just because it s scaled down from a full-size ratchet doesn t mean it skimps on performance the Blackburn Big Switch Ratchet Tool takes the same simple necessities from the popular Switch and Big Switch and adds a convenient, ratcheting handle for even quicker, hassle-free adjustments. Extra-long 2.5 through 8mm Allen bits take care of business, along with T25 and T30 Torx, the renowned Wayside chain breaker, 0, 1, and 2 spoke wrenches, a disc-pad spreader, flathead, and a presta valve core tool. You re covered. Fully covered.T25, T30 Torx bitsExtra-long 2.5, 3, 4, 5, 6, 8mm Allen bitsFlathead screwdriverWayside chain breakerSize 0,1,2 spoke wrenchesDisc pad spreaderPresta valve core tool
Perfect for the latest generation of all-purpose road and gravel bikes, the M Part AR2 Rear Pannier Rack is packed with features and ready for your next adventure!Designed for all-purpose road & gravel bikes with tyres up to 40mm wideSlimline design keeps the clean look of your bike intactIntegrated fender plate and rear reflector/light mountIndependently adjustable leg length allows you to get the perfect fitTough anodised finish looks great and resists corrosionFeaturing a stylish, slimline aircraft grade aluminium construction, the AR2 is built to last and features an integrated fender plate and rear reflector/light mount. Not only is it tough as old boots, but the AR2 is suitable for the latest generation of versatile drop-bar bikes with tyres up to 40mm tyres, while the independently adjustable leg length make it easy to get a perfect fit. Durable, versatile and great value, the M Part AR2 is a great choice for riders who want a durable, no-nonsense pannier rack.
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
The Park Tool FR8C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and removes four notch freewheels from flip-flop BMX hubs with 30 x 1mm threads.
Manufacturing since 1989, Flinger Mudguards are specialists in production of high quality, light weight, impact resistant mudguards for road or MTB use.Round profile (compatible with modern frames and brake callipers)Kinked stays front and rear offer clearance for disc brakes or carriersSafety clip on front staysMudflap, reflectorFitting kit includedBlack 700 x 18-25c35mm ProfileAttention to details such as clearance for modern disc brakes or carrier racks, safety release clips, mudflaps front/rear and a CATEYE reflector make these guards the choice of the discerning all weather cyclist, keeping you dry and safe.Made from lightweight, flexible, impact resistant, polycarbonate with stainless steel v-stays and brackets. We increased the diameter of the stays to 4mm, this dramatically increases the overall stiffness of the guards. Flinger mudguards are the most rigid, stable guards on the market.
Manufacturing since 1989, Flinger Mudguards are specialists in production of high quality, light weight, impact resistant mudguards for road or MTB use.Round profile (compatible with modern frames and brake callipers)Kinked stays front and rear offer clearance for disc brakes or carriersSafety clip on front staysMudflaps, reflectorFitting kit includedBlack 700 x 32-40c50mm ProfileAttention to details such as clearance for modern disc brakes or carrier racks, safety release clips, mudflaps front/rear and a CATEYE reflector make these guards the choice of the discerning all weather cyclist, keeping you dry and safe. Made from Lightweight, Flexible, Impact resistant, Polycarbonate with Stainless steel V-stays and brackets. We increased the diameter of the stays to 4mm, this dramatically increases the overall stiffness of the guards. Flinger are the most rigid, stable guards on the market.
The PRO Cassette Removal Set is for installing and removing all types of Shimano Cassettes. Both are heat treated for durability and have rubberised handles to provide a comfortable and safe grip.Chain whip and lock ring tool remover set for holding cassettes and Freehubs when removing the lockingHeat treated tools for increased durabilityRubberised handles for comfortable gripIntegral safety pin on cassette remover reduces the risk of tool slipping when under loadDesigned to fit all Shimano cassettes
The FastFuel TriBag is ideal for those longer time trial or triathlon events where nutrition is a concern or simply a neat solution for the latest generation of aerodynamic road bikes and any rider looking to go fast! With a simple, stylish and aerodynamic design, the FastFuel TriBag allows easy access to your stored contents like energy gels, smartphone, wallet or tools.Aerodynamic Top Tube Bag Allows Easy Access To ContentsDivided Main Compartment600 Denier Polyester TPU ConstructionAdjustable Nylon StrapsSize (L x W x H) 24 x 8.5 x 5.5cm0.6L capacityWeight: 145g
The best solution in the case of all eventualities: the SKS Mudrocker Rear Mudguard is made of high-performance impact-resistant plastic in a black, matt-gloss design is integrated on the rear wheel in such a way that the frame and wheel form a single unit. The very long mudguard perfectly deflects dirt and spray water. Made of fiberglass reinforced plasticMounting with rubberised hook and look fastenersIdeal for mountain bikes, also those with a Vario seat postClip-on extender and extensionMade in GermanyWeight: 283 + 35gLength: 840mmWheel size: 27.5" (650b)", 28", 29 "Tyre width in inches: 2.2"-3.0"Tyre width in mm: 59-76mmLength rear fender: 840mmAnother advantage: the Mudrocker is also suitable for full suspension bikes and mountain bikes with a Vario seat post. It is mounted on the seat bars of the rear fork with rubberised hook and loop fasteners. The soft, wedge-shaped pad in the mounting brackets protects the frame, can be rotated and used in two different positions for height adjustment. Like this, the distance to the tyre can be perfectly adjusted. Another type of protection is provided by the extender which can optionally be inserted and slid towards the seat bar. It can be specifically adapted using scissors and provides protection against dirt in the bottom bracket area and on the derailleur. In addition, a further extension provides even more protection against splashing water. If necessary, it can be easily attached to the lower rear end of the mudguard. Hook and loop fasteners and a frame protection film are included.
The Power Weight Bag range from Athletic Vision are the perfect choice for gym & home workouts. Featuring padded straps for ease of use and a durable PVC design means these bags will last the test of time. Perfect choice for gym & home workoutsWide straps for ease of use and a durable PVC designIdeal for developing core strength, power and balanceGreat for targeting the legs with squat & lunge exercisesThese weight bags are ideal for developing core strength, power and balance as well as being great for targeting the legs with squat & lunge exercises. Also a great versatile option when training CrossFit. The Athletic Vision Power Weight Bag range is available in the following options 10kg, 15kg, 20kg & 25kg. So, there are plenty of options that allow you to find the correct weight to suit your workout. Sold Individually.
The Medicine Ball range from Athletic Vision are the perfect choice for gym & home workouts. Manufactured using premium rubber, these medicine balls offer great durability and with a textured finish to aid grip. The medicine balls are also colour co-ordinated, so each weight is easily identifiable. The Medicine Balls are ideal for developing core strength as well being used for challenging full body work outs. They also offer low bounce so are ideal for functional training such as throwing against walls and slamming into floors. A great all-round piece of kits that should form part of any gym range. The Athletic Vision Medicine Ball range is available in the following options 4kg, 6kg, 8kg & 10kg. So, there are plenty of options that allow you to find the correct weight to suit your workout. Sold Individually.
The Master Lock U-Lock + Cable with End Looped Cable features a 11cm wide hardened steel body for maximum strength and reliability. The 16mm diameter double locking shackle is 21cm long and made of hardened steel, offering extra resistance to prying, cutting and sawing. The disc key cylinder prevents picking. The end looped cable is 1,2m long and features 10mm diameter for additional security. The Limited Lifetime Warranty provides peace of mind from a brand you can trust.Hardened steel body resists cutting, sawing and pryingDouble locking shackle withstands 2 tons of pull forceProtective vinyl coating helps prevent scratchingIntegrated disc keyed locking mechanism for maximum pick resistanceSliding dust cover protects keyway from dirt and moistureSoft grip for comfortable use, weather and scratch resistanceBraided steel end looped cable for additional securityCarrier bracket included for easy transportationCertified: Sold Secure Gold, Vds, SBSC, Secured by Design
The Master Lock Hardened Steel U-Lock features a 10.4cm wide hardened steel body for maximum strength and reliability. The 14mm diameter double locking shackle is 21cm long and made of hardened steel, offering extra resistance to prying, cutting and sawing. The disc key cylinder prevents picking. The Limited Lifetime Warranty provides peace of mind from a brand you can trust.Hardened steel body resists cutting, sawing and pryingDouble locking shackle withstands 2 tons of pull forceProtective vinyl coating helps prevent scratchingIntegrated disc keyed locking mechanism for maximum pick resistanceSliding dust cover protects keyway from dirt and moistureCarrier bracket included for easy transportationInsurance approved: Sold Secure, VDS
The Master Lock U-Lock features a 11cm wide hardened steel body for maximum strength and reliability. The 13mm diameter double locking shackle is made of hardened steel, offering extra resistance to prying, cutting and sawing. The disc key cylinder prevents picking. The Limited Lifetime Warranty provides peace of mind from a brand you can trust.Two lengths available with an extra length shackle (28cm) to fit more applicationsHardened steel body resists cutting, sawing and pryingDouble locking shackle withstands 2 tons of pull forceProtective vinyl coating helps prevent scratchingIntegrated disc keyed locking mechanism for maximum pick resistanceSliding dust cover protects keyway from dirt and moistureSoft grip for comfortable use, weather and scratch resistanceCarrier bracket included for easy transportationCertified: Sold Secure Gold, VDS, SBSC, Secured by design