This revised Neutron riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering. Coming equipped with a shot-peened alloy construction, it gives you fantastic durability and strength on the roughest of rides. Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won’t lose any reach, like you would on a standard bar. Complete with technical markings on its top, this riser is also simple to set up while sitting on your bike. Handlebar instructions available to download here
This MTB riser bar features a rock-solid alloy construction, which makes it incredibly tough as you blast across the mountain bike trails. Nukeproof has also put this trail-ready riser bar through a shot-peening process, which gives it extra durability as you tackle all the challenges that are associated with all-day epics in the mountains. Coming equipped with a revised design, this version gives you an updated profile with the same angles and rise options as before. This allows you to enjoy its unique offset as well as its technical marking on the top for easy setup. Handlebar instructions available to download here
This front wheel features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately). The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Driveside Spoke Length Driveside Spoke Length Front 27.5" 272 273 Front 29" 291 292 Conversion kits and replacement end caps available separately. Please click here to view how to change your hub spacing with end caps. Full range of spare parts available.
A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
142mm, 148mm and 150mm axle options available. You will need to choose the correct axle to suit your hub spacing. Please note that the 148mm axle you require will depend if you are using a HG / XD or Microspline freehub.
These end caps can be used to convert your hub to a different spacing or replace a lost cap. Compatibility Chart & How to Fit End Caps Please click here to determine which hubs can be converted, as the caps only fit the original specific hub options. End Caps: Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.
This rear wheel features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future. The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke. The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Full range of spare parts available.
This set contains four pawls and four springs, plus a plastic cover for the freehub.
This kit contains all the parts needed to convert your 148mm Nukeproof Neutron HG / XD hub to have a microspline freehub. Please note this kit requires the hub to be stripped, a step by step guide to do this can be found here.
This non-driveside seal fits all Nukeproof Horizon and Neutron v2 rear hubs. Hub Seal Changing this seal is easy by following the instructions below: 1. Remove non-driveside end cap 2. Take a thin flat head screwdriver and gently prize off the old seal 3. Push new seal in place 4. Refit non-driveside end cap
This MTB rim features a 28mm internal diameter and it's constructed from a 6066 alloy, which makes it light enough for aggressive trail-riding as well as strong enough for DH. This rim can be setup tubeless by using tubeless tape and is for disc brake use only. Rim Size ERD Approx Weight 27.5" 560.9 470g 29" 598.9 500g
The additional padding of this Neutron Saddle ensures maximum comfort even during the most epic days in the mountains, hills and forests. The Neutron saddle features tough CrMo rails and as durability is a key consideration, Nukeproof has utilised a tough microfabric cover within its construction. This saddle is lightweight and suits a wide range of rider shapes and sizes, which makes it an ideal saddle for any trail riding discipline.