The Nukeproof Neutron V2 Front Wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm BoostSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedBuild: Hand builtThe 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof s Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.
The Neutron V2 Rear Wheel from Nukeproof has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 142x12mm, 148x12mm, 150/157x12mmConversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)Rear Hub Engagement: 36 points of engagement (every 10°)Freehub Options: Shimano HG, Shimano Micro spline, or SRAM XDSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedSingle or Pair: SingleBuild: Hand builtWeight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeThe 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.
This conversion kit is specifically designed for use with Nukeproof Neutron V2 hubs. It contains all the parts needed to convert your 148mm Nukeproof Neutron HG / XD hub to have a microspline freehub. Please note this kit requires the hub to be stripped.Use: MTBCompatibility: Nukeproof Neutron V2 hubsIncludes: Complete freehub, axle and drive side end capColour: BlackOption: Shimano Microspline
This freehub body set is designed for use with Nukeproof Neutron V2 hubs. A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit.Material: AlloyUse: MTBPawl: 4-pawlHub Compatibility: Nukeproof Neutron V2Cassette Compatibility: Shimano HG 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD SRAM Eagle XD Cassettes or Shimano Microspline Shimano microspline cassettesPoints of Engagement: 36Part Number: Shimano HG Freehub: NUKNEUV236TFHHG; SRAM XD Freehub: NUKNEUV236TFHXD; Shimano Microspline Freehub: NUKNEUV236TFHMSThis freehub is only compatible with Nukeproof Neutron V2 hubsPlease Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Options:Shimano HGShimano MicrosplineSRAM XDIf you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit (Part Number: NUKNEUV236MSCONV).Freehub Installation Instructions:Remove drive side end capPull off old freehub turning anticlockwise as you pullCheck hub seal for damage, if it is damaged remove the sealIf seal was removed, press on new sealApply grease hub ratchet ringApply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwiseRefit drive side end cap
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold bottom headset cups are available in both internal and external types for both standard and tapered steerer tubes, enabling you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight. They include split alloy crown races for easy installation and the 1.5” versions can be easily adapted to work with alternative fork steerer types with the addition of the 1 1/8" to 1.5" crown race adaptor (reducer) if required (sold separately).
The platform now has increased leading and trailing edge height with knurled traction patches above the axle body to increase overall traction. Along with this, an updated pin layout will ensure the rider’s foot remains ‘planted’ on the pedal to provide improved grip and performance. Light and Tough Flat Pedals These Neutron Evo Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair. Durable and Grippy Built using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip. Installation is done using an 8mm hex key. Click here for a Step by Step Installation Guide Spares Available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap
It features extensive CNC machining to shave off excess material and is specifically built to tackle the gnarliest of DH trails while staying light enough for all-round trail riding. Ultimate Strength and Stiffness Nukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength, which offers maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the low stack height provides more cockpit tuning possibilities.
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold top headset cups are available in both internal and external types for both standard and tapered steerer tubes, which enables you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight.
The Neutron grip's design ensures they offer optimised trail feedback without sacrificing on comfort. The locking mechanisms on either end ensure the grips are going nowhere. Plus, with these MTB grip's durable A25 Kraton rubber, they not only offer excellent grip, they're also super-durable too.
Featuring extensive CNC machining to shave off excess material, this stem is specifically built to tackle the gnarliest of DH trails. Ultimate Strength and Stiffness Nukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength to offer maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the direct mount attachment provides a clean finish when mounted to your dual crown DH forks.
Compatible with Shimano 9, 10 and 11-speed MTB cassettes.
Genuine, high-quality replacement Nukeproof parts.