Trust in these socks featuring the Infiknit fibres that are stronger than the force itself. With lightweight cushioning and a combed cotton blend.
Key Features:More clearance. ,Optimum length, not too short, no longer than needed. ,Subtle kicker to keep length as short as possible without compromising spray protection. ,Strong enough for DH racing at the highest level. ,100% recycled PP..
Are you ready? The worlds fastest mudguard is evolving…The New Mudhugger EVO, designed with the help of DH World Cup and EWS racers.We’ve had the benefit of designing the new Mudhugger EVO around the the latest FOX 36 and 38’s and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost.Please note: For fitting to RockShox Zeb or Ohlins forks the Mudhugger Adapter Kit (Product ID: 234767) is also required. More clearance,Stiffer,Optimum length, not too short, no longer than needed.,Subtle kicker to keep length as short as possible without compromising spray protection.,Strong enough for DH racing at the highest level.,100% recycled PP.,Made and designed in the UK..
Mudhugger decals allow you to customize your ride and make it your own. Sold in packs of 5.
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.
Designed and made in the UK from 100% recycled black polypropylene. Following the tried and tested tyre hugging design of our MTB Mudhuggers the GravelHugger is designed to fit most fork + wheel + tyre combo's for your Gravel Bikes. To reduce single use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Suitable for 700c (Max tyre width 42mm) and 650b wheels (Max tyre width 50mm) depending on wheel/tyre/fork combination. Zipties (sold separately) can be utilised if you'd prefer to fit and leave on at all times. Helitape supplied to protect inside of forks where the GravelHugger could scratch the paint. Weight: approx 70g (without fittings) - Length 490mm - width 60mm
Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed. Weight approx 16g Wheel Size: 26/29 Colour: Black Material: Plastic
Mudhugger Large Rear MudguardAvoid unwanted mud and spray with this Large Rear Mudguard from Mudhugger. Designed for 29" and 27.5+ full-suspension bikes, this is the ideal essential when tackling off-road terrain. The rear fender braces are designed to be custom cut around cable stops/guides and other unique seat stays/swingarm shapes and features. Some frames have asymmetrical stays, like found on EVIL bikes, and may not fit or will require extensive customization to fit.Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seat post the Rear Mudhugger works well on all bikes, providing they have disc brakes.However, attaching the Hugger to the seat stays also overcomes all of the problems normally associated with rear mudguards. They do not move out of line, get in the way getting on or off the bike, do not foul rear suspension travel, and are robust enough to take the rough and tumble of modern trail riding demands.For those of you into your Down Hill, enduro or endurance racing, being able to get out in all weather conditions, train hard and remain comfortable for much longer will undoubtedly pay dividends at the start of the race season.Features:Kit Includes: Fender, zip ties and protective/non-slip heli tape.Compatibility: Ideal for all 29" and 27.5+ full-suspension bikesDimensions: Approx. 760mm longDimensions: Approx. 105mm wide at the widest partDimensions: Braces are approx. 160mm longBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Medium Rear MudguardProtect yourself from mud and spray with this rear mudguard from Mudhugger. Designed for 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degrees, this is a helpful option for protecting yourself from unwanted mud spray when tackling tough terrain. The Medium Rear Mudhugger is nearly identical to the Small Rear Fender, but 80mm longer. This longer version is ideal for most 27.5 full-suspension frames. And 29” hardtail bikes.If your bike has seat stay angles 28- 31 degrees then the Medium Rear Mudhugger is probably the best choice, this applies to the vast majority of bike designs. Think Cannondale, Whyte, Lapierre, Transition, Rose, Commencal, Calibre, Kona, GT, Canyon, Giant and Marin.The rear fender braces are designed to be custom cut around cable stops/guides and other unique seat stays/swingarm shapes and features. Some frames have asymmetrical stays, like found on EVIL bikes, and may not fit or will require extensive customization to fit.Kit includes fender, zip ties and protective/non-slip heli tape.Features:Ideal for most 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degreesApprox. 640mm longApprox. 100mm wide at the widest partBraces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega Carbon Mountain Bike UDH Stop BoltThe Mega Carbon UDH Stop Bolt is a replacement stop bolt from Nukeproof that's compatible with the 2021-2022 Mega and Giga Carbon Frame.Features: Genuine Nukeproof Spare Parts Part Number: 1x FB-GAN-127 - UDH Stop Bolt Compatibility: 2021-2022 Mega and Giga Carbon FrameBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Pilo Engineering Replacement Sram UDH Derailleur Hanger -This derailleur hanger features a completely re-engineered design that boasts a 100% alloy construction without any plastic, allowing you to benefit from maximum durability. Pilo Engineering has also equipped this version with an anodised coating for additional protection against corrosion during wet riding conditions. Compatible with a wide range of bike manufacturer's listed below, this is an easy to install replacement and it comes complete with mounting hardware. Whether your original derailleur hanger has broken, or you simply want an extra one to keep as a spare, this model is designed for reliable performance.Features: Material: 6061 T6511 ASTM B221 billet Aluminium Finish: Anodised coating Axle Thread: M12x1mm 100% Alloy construction - no plastic Manufactured using CNC technology Mounting Hardware Included: YesCompatibility:This replacement derailleur hanger is compatible with the following bike models: Canyon: 2021 Exceed CF SLX M075-01 Exceed CF SLX 8 Exceed CF SLX 9 2021 Exceed CF M076-01 Exceed CF 5 Exceed CF 5 WMN Exceed CF 6 Exceed CF 7 Exceed CF 7 WMN 2021 Exceed CFR M112-01 Exceed CFR LTD Exceed CFR Team 2021 Lux CF SLX M063-01 Lux CF SLX Frameset MVDP 2021 Spectral CF M121-01 Spectral 29 CF 7 Spectral 29 CF 8 Spectral 29 CF 9 Spectral 29 LTD Orbea 2021 Oiz OMX 2021 Alma OMR 2021 Alma OMX Santa Cruz: 2021 5010 V4 Specialized: 2021 Stumpjumper Evo Transition: 2021 Patrol Trek: 2020 2021 Procaliber 9.7 2020 2021 Fuel EX 9.9 ABP 2020 2021 Rail 9.8 2021 Powerfly FS 4 2021 Rail 9.7 2021 Rail 7 2021 Rail 9.9 XTR 2021 Powerfly FS 9 Equipped 2021 Rail 9.9 X01 AXS 2022 Session 8 GX, Session 9 X01, Session 9.9 29 er Whyte: 2021 E-150 S 29ER, E-150 RS 29ER, G-180 S, G-180 RS, G-180 RS 29ER, G-180 WORKS 29ER, T-160 S, T-160 RS Yeti: 2021 ACR YT: 2021 Capra MK3 Manufacturer's Part Number: D798Buy Pilo Engineering Components from Chain Reaction Cycles, the World's Largest Online Bike Store.