Zipp 404 NSW Carbon Tubeless Rear WheelThe 404 NSW is the ultimate all-rounder and provides fantastic climbing efficiency and comfort while being more than capable of maintaining speed on the flat and stability during high-speed descents. Its stiffness and strength have been proven on the Spring Classic race events across cobbled streets and rough, uneven terrain but are still light enough to inspire rider confidence when sprinting out of corners.CognitionThe ultimate in Zipp hub technology. Every time a conventional hub set starts to coast, friction within the freehub ratchet mechanism works like a drum brake to slow the rider down. The drag between hub shell and driver body during coasting is considered an efficiency loss, especially for road wheels. High drag also can significantly contribute to chain-dropping issues. The drag torque drives the cassette clockwise so the chain gets loose on the load side. The solution? The rear Cognition hub with AxialClutch technology reduces drag by disengaging the ratchet mechanism when coasting. It then uses magnets to re-engage once the rider starts pedalling.ShowstopperShowstopper is a complimenting pairing of a directional, moulded-in, texture with silicon carbide particles suspended in the surface resin. The current media blast process applied to all Zipp rims increases the surface roughness of the brake track providing the rider with consistent and responsive braking. In order to improve this for the wettest of rides, Zipp have introduced a moulded-in groove specifically tuned for the Zipp Tangente Platinum Pro EVO Brake Pad. The grooves have been optimized to interact with leading edge (relative to the rotation of the wheel) of the brake pad and the four cooling channels. The leading edge of the pad and first two channels efficiently wipe water and debris outward, cleaning and drying the braking surface, while the second two cooling channels have maximum interference with the grooves allowing greater braking force than a smooth rim. The cleaning effects of the groove and pad interaction improve brake feel and consistency even in dry conditions.Hexfin Aerodynamic Boundary Layer Control (ABLC)The Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim's profile to further reduce high yaw drag and improve crosswind stability.ImPressZipp's ImPress graphics technology prints graphics directly on the wheel, which allows the dimples to do what they were designed to achieve, to control vortex shedding and the rate at which air sheds off the wheel. Managing this is crucial to stability. ImPress graphics also give NSW a distinctive stealthy look.Features: Rim Material: Carbon with UD Fibre Finish and Impress Technology Use: Road Axle Type: QR 135mm (quick release) Internal Rim Width: 20mm Rim Depth: 58mm Rim Profile: Symmetrical Brake Compatibility: Rim Brake Size: 700c Tyre Compatibility: Clincher, Tubeless Ready Surface Texture: ABLC SawTooth Nipple Material: Aluminium Nipple Anti-rotation: Sapim Secure-loc Spoke Type: CX-Ray - Black Spoke Count: 24 Spoke Pattern: 2 cross Hub: Cognition Driver Body Type: SRAM XDR Axle Material: Aluminium Bearings: Cartridge, Stainless Steel Driver Mechanism: Axial Clutch Driver Body Material: Aluminium Max Tyre Pressure: 125psi Max Recommended Rider Weight: 250lbs Single or Pair: Single rear wheel Weight: 882g (approx)Technologies: New graphics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do - improve aero performance. Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control and comfort. Cognition hubset with Axial Clutch technology provides reduced drag when coasting. ABLC Sawtooth dimple design helps manage airflow around the rim, and contributes to create a faster, more stable wheel. Industry leading Showstopper brake track: powerful and consistent braking, even on the wet. SRAM XDR driver body. Ships with QR end caps, quick release skewers. Campagnolo driver body sold separately.Manufacturer's Part Number: ZPWH8518001 Black 700c SRAM XD SRAM XDRBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 404 NSW Carbon Tubeless Rear WheelThe 404 NSW is the ultimate all-rounder and provides fantastic climbing efficiency and comfort while being more than capable of maintaining speed on the flat and stability during high-speed descents. Its stiffness and strength have been proven on the Spring Classic race events across cobbled streets and rough, uneven terrain but are still light enough to inspire rider confidence when sprinting out of corners.CognitionThe ultimate in Zipp hub technology. Every time a conventional hub set starts to coast, friction within the freehub ratchet mechanism works like a drum brake to slow the rider down. The drag between hub shell and driver body during coasting is considered an efficiency loss, especially for road wheels. High drag also can significantly contribute to chain-dropping issues. The drag torque drives the cassette clockwise so the chain gets loose on the load side. The solution? The rear Cognition hub with AxialClutch technology reduces drag by disengaging the ratchet mechanism when coasting. It then uses magnets to re-engage once the rider starts pedalling.ShowstopperShowstopper is a complimenting pairing of a directional, moulded-in, texture with silicon carbide particles suspended in the surface resin. The current media blast process applied to all Zipp rims increases the surface roughness of the brake track providing the rider with consistent and responsive braking. In order to improve this for the wettest of rides, Zipp have introduced a moulded-in groove specifically tuned for the Zipp Tangente Platinum Pro EVO Brake Pad. The grooves have been optimized to interact with leading edge (relative to the rotation of the wheel) of the brake pad and the four cooling channels. The leading edge of the pad and first two channels efficiently wipe water and debris outward, cleaning and drying the braking surface, while the second two cooling channels have maximum interference with the grooves allowing greater braking force than a smooth rim. The cleaning effects of the groove and pad interaction improve brake feel and consistency even in dry conditions.Hexfin Aerodynamic Boundary Layer Control (ABLC)The Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim's profile to further reduce high yaw drag and improve crosswind stability.ImPressZipp's ImPress graphics technology prints graphics directly on the wheel, which allows the dimples to do what they were designed to achieve, to control vortex shedding and the rate at which air sheds off the wheel. Managing this is crucial to stability. ImPress graphics also give NSW a distinctive stealthy look.Features: Rim Material: Carbon with UD Fibre Finish and Impress Technology Use: Road Axle Type: QR 135mm (quick release) Internal Rim Width: 20mm Rim Depth: 58mm Rim Profile: Symmetrical Brake Compatibility: Rim Brake Size: 700c Tyre Compatibility: Clincher, Tubeless Ready Surface Texture: ABLC SawTooth Nipple Material: Aluminium Nipple Anti-rotation: Sapim Secure-loc Spoke Type: CX-Ray - Black Spoke Count: 24 Spoke Pattern: 2 cross Hub: Cognition Driver Body Type: SRAM XDR Axle Material: Aluminium Bearings: Cartridge, Stainless Steel Driver Mechanism: Axial Clutch Driver Body Material: Aluminium Max Tyre Pressure: 125psi Max Recommended Rider Weight: 250lbs Single or Pair: Single rear wheel Weight: 882g (approx)Technologies: New graphics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do - improve aero performance. Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control and comfort. Cognition hubset with Axial Clutch technology provides reduced drag when coasting. ABLC Sawtooth dimple design helps manage airflow around the rim, and contributes to create a faster, more stable wheel. Industry leading Showstopper brake track: powerful and consistent braking, even on the wet. SRAM XDR driver body. Ships with QR end caps, quick release skewers. Campagnolo driver body sold separately.Manufacturer's Part Number: ZPWH8518001 Black 700c SRAM XD SRAM XDRBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 404 Firecrest Carbon Tubeless Rear WheelZipp's legendary speed weapon, the 404 Firecrest, is better than ever. This go-to rim-brake rear wheel is, for the first time, tubeless ready. That means you can run reduced tyre pressure for reduced rolling resistance and increased cornering grip and compliance without the risk of pinch flats. This rear wheel's 58mm rim depth is a classic that has carried athletes to victory in every kind of event and situation - every triathlon distance, breakaways, field sprints and hilly finishes. Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency. Zipp's ShowStopper textured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the centre of the 404 Firecrest Tubeless rim-brake is a versatile and durable hub, the German-engineered ZR1. If you had to choose just one wheel for road riding and racing, the 404 Firecrest Tubeless is a savvy and speedy choice.ABLC SawtoothThe Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim's profile to further reduce high yaw drag and improve crosswind stability. ABLC Sawtooth dimple design helps manage air flow around the rim and contributes to creating a faster, more stable wheel.Features: Rim Material: Carbon with UD Fibre finish and adhesive decals Use: Road Axle Type: QR 135mm (quick release) Internal Rim Width: 19mm Rim Depth: 58mm Rim Profile: Symmetrical Brake Compatibility: Rim Brake Size: 700c Tyre Compatibility: Clincher, Tubeless Ready Surface Texture: ABLC SawTooth Nipple Material: Aluminium Nipple Anti-rotation: Sapim Secure-loc Spoke Type: CX-Ray - Black Spoke Count: 24 Spoke Pattern: 2 Cross Driver Body Type: SRAM XDR Axle Material: Aluminium Bearings: Cartridge - Steel Driver Mechanism: 6 Pawls Leaf Spring Driver Body Material: Aluminium Max Tyre Pressure: 125psi Max Recommended Rider Weight: 250lbs Single or Pair: Single rear wheelTechnologies: New Zipp graphics and cosmetic identity that scream speed. New ZR1 hub is engineered in Germany with a better seal design for improved durability and quicker response with 66 points of engagement. Built with Sapim CX Sprint J-bend spokes. Tubeless ensuring secure performance even when ridden at lower tyre pressures. All-around aero 58mm rim depth with proven crosswind stability. ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel. Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions. Ships with QR end caps, quick-release skewer. Campagnolo driver body sold separately.Manufacturer's Part Number: ZPWH8522001 Black 700c SRAM XD SRAM XDRBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 404 Firecrest Carbon Tubeless Rear WheelZipp's legendary speed weapon, the 404 Firecrest, is better than ever. This go-to rim-brake rear wheel is, for the first time, tubeless ready. That means you can run reduced tyre pressure for reduced rolling resistance and increased cornering grip and compliance without the risk of pinch flats. This rear wheel's 58mm rim depth is a classic that has carried athletes to victory in every kind of event and situation - every triathlon distance, breakaways, field sprints and hilly finishes. Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency. Zipp's ShowStopper textured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the centre of the 404 Firecrest Tubeless rim-brake is a versatile and durable hub, the German-engineered ZR1. If you had to choose just one wheel for road riding and racing, the 404 Firecrest Tubeless is a savvy and speedy choice.ABLC SawtoothThe Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim's profile to further reduce high yaw drag and improve crosswind stability. ABLC Sawtooth dimple design helps manage air flow around the rim and contributes to creating a faster, more stable wheel.Features: Rim Material: Carbon with UD Fibre finish and adhesive decals Use: Road Axle Type: QR 135mm (quick release) Internal Rim Width: 19mm Rim Depth: 58mm Rim Profile: Symmetrical Brake Compatibility: Rim Brake Size: 700c Tyre Compatibility: Clincher, Tubeless Ready Surface Texture: ABLC SawTooth Nipple Material: Aluminium Nipple Anti-rotation: Sapim Secure-loc Spoke Type: CX-Ray - Black Spoke Count: 24 Spoke Pattern: 2 Cross Driver Body Type: SRAM XDR Axle Material: Aluminium Bearings: Cartridge - Steel Driver Mechanism: 6 Pawls Leaf Spring Driver Body Material: Aluminium Max Tyre Pressure: 125psi Max Recommended Rider Weight: 250lbs Single or Pair: Single rear wheelTechnologies: New Zipp graphics and cosmetic identity that scream speed. New ZR1 hub is engineered in Germany with a better seal design for improved durability and quicker response with 66 points of engagement. Built with Sapim CX Sprint J-bend spokes. Tubeless ensuring secure performance even when ridden at lower tyre pressures. All-around aero 58mm rim depth with proven crosswind stability. ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel. Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions. Ships with QR end caps, quick-release skewer. Campagnolo driver body sold separately.Manufacturer's Part Number: ZPWH8522001 Black 700c SRAM XD SRAM XDRBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 202 NSW Carbon Tubeless Disc Rear WheelZipp's 202 NSW Tubeless Disc-brake model packs a heavy load of performance into a light and nimble rear wheel. This wheel flies up the toughest climbs, shaves time off descents, and handles deftly off the pavement. For aero performance, Zipp's ABLC Sawtooth dimple design extends to the rim's edge. The 202 NSW Tubeless Disc-brake is optimised for wide tyres with lower tyre pressure to meet the performance needs of modern riders in search of low rolling resistance and high compliance. With an internal width of 21mm, the wheelset is well suited for rough roads and tests fastest with a 28mm tyre in the majority of wind angles.ABLC SawtoothThe Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim's profile to further reduce high yaw drag and improve crosswind stability.Features: Rim Material: Carbon with UD Fibre finish and adhesive decals Use: Road Axle Type: 12x142mm Thru-Axle (TA) Internal Rim Width: 21mm Rim Depth: 32mm Rim Profile: Symmetrical Brake Compatibility: Disc Brake (Centre Lock rotor compatible) Size: 700c Tyre Compatibility: Clincher, Tubeless Ready Surface Texture: ABLC SawTooth Nipple Material: Aluminium Nipple Anti-rotation: Sapim Secure-loc Spoke Type: CX-Ray - Black Spoke Count: 24 Spoke Pattern: 2 Cross Hub: Cognition Drive Body Type: SRAM/Shimano Road Axle Material: Aluminium Bearings: Cartridge, Steel Driver Mechanism: Axial Clutch Driver Body Material: Aluminium Max Tyre Pressure: 100psi Max Recommended Rider Weight: 250lbs Single or Pair: Single rear wheel Weight: 801g (approx)Technologies: New Zipp graphics and cosmetic identity that scream speed. Applied using Zipp's ImPress direct-print technology. Centre locking rotor interface. Lockring is included. Ships with 12mm rear end caps. Campagnolo driver body sold separately. Tubeless design provides secure performance when ridden at lower tyre pressures. Cognition DB hub features Axial Clutch technology to allow the freehub's ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs.Manufacturer's Part Number: ZPWH8508000 Black 700c Shimano/SRAM Buy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 808 NSW Carbon Tubeless Disc Rear WheelZipp's 808 NSW Tubeless Disc rear wheel features a rim shape that aerodynamically integrates wider tubeless tyres for high-performance road cycling at its deepest rim depth, 82mm. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. Also, you get the wider tyre options and increased stopping power of disc brakes.The 808 NSW Tubeless Disc rear wheel is optimised for smoother pavement and is aerodynamically optimised for 25mm tyres. By extending Zipp's patented ABLC Sawtooth dimples all the way to the rim's edge on each of the wheels, NSW disc brake rims deliver higher frequency wind vortex shedding for best-in-class crosswind stability.This rear wheel allows you to run tubeless or traditional clinchers. Zipp's new wheel cosmetics give this model a perfect combination of speed and style.Features: Rim Material: Carbon Rim Finish: UD fibre, Impress technology finish Use: Road Axle Size: 142mm x 12mm Thru-Axle (TA) Orientation: Rear wheel Wheel Size: 700c Inner Rim Width: 19mm Rim Depth: 82mm Tyre Compatibility: Clincher Tubeless Ready Surface Texture: ABLC SawTooth Brake Compatibility: Disc (Center Lock) Rim Profile: Symmetrical Nipple Material: Aluminium Nipple Anti-Rotation: Sapim Secure-Loc Spoke Type: CX-Ray - Black Spoke Count: 24 Spoke Pattern: 2 Cross Hub Cognition: Cognition Driver Body Type: SRAM/Shimano Road Hub Colour: Dual Tone: Matte & Glossy Black Axle Material: Aluminium Bearings: Cartridge - Stainless Steel Driver Mechanism: Axial Clutch Driver Body Material: Aluminium Max Tyre Pressure: 125psi Single or Pair: Single Max Recommended Rider Weight: 250lbs Weight: 983gTechnologies: New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do - improve aero performance. An all-out aero 82mm rim profile that's tubeless-ready for increased speed and better cornering, control, and comfort. Cognition DB hub with Axial Clutch technology provides reduced drag when coasting. ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to creating a faster, more stable wheel. Centre locking rotor interface. Lockring is included. XDR or SRAM/Shimano driver bodies (choose option from the menu). Ships with 12mm rear end caps. Campagnolo driver body sold separately.Manufacturer's Part Number: ZPWH8534000 Black 700c Shimano/SRAM ZPWH8534001 Black 700c SRAM XD SRAM XDRBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 808 NSW Carbon Tubeless Disc Rear WheelZipp's 808 NSW Tubeless Disc rear wheel features a rim shape that aerodynamically integrates wider tubeless tyres for high-performance road cycling at its deepest rim depth, 82mm. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. Also, you get the wider tyre options and increased stopping power of disc brakes.The 808 NSW Tubeless Disc rear wheel is optimised for smoother pavement and is aerodynamically optimised for 25mm tyres. By extending Zipp's patented ABLC Sawtooth dimples all the way to the rim's edge on each of the wheels, NSW disc brake rims deliver higher frequency wind vortex shedding for best-in-class crosswind stability.This rear wheel allows you to run tubeless or traditional clinchers. Zipp's new wheel cosmetics give this model a perfect combination of speed and style.Features: Rim Material: Carbon Rim Finish: UD fibre, Impress technology finish Use: Road Axle Size: 142mm x 12mm Thru-Axle (TA) Orientation: Rear wheel Wheel Size: 700c Inner Rim Width: 19mm Rim Depth: 82mm Tyre Compatibility: Clincher Tubeless Ready Surface Texture: ABLC SawTooth Brake Compatibility: Disc (Center Lock) Rim Profile: Symmetrical Nipple Material: Aluminium Nipple Anti-Rotation: Sapim Secure-Loc Spoke Type: CX-Ray - Black Spoke Count: 24 Spoke Pattern: 2 Cross Hub Cognition: Cognition Driver Body Type: SRAM/Shimano Road Hub Colour: Dual Tone: Matte & Glossy Black Axle Material: Aluminium Bearings: Cartridge - Stainless Steel Driver Mechanism: Axial Clutch Driver Body Material: Aluminium Max Tyre Pressure: 125psi Single or Pair: Single Max Recommended Rider Weight: 250lbs Weight: 983gTechnologies: New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do - improve aero performance. An all-out aero 82mm rim profile that's tubeless-ready for increased speed and better cornering, control, and comfort. Cognition DB hub with Axial Clutch technology provides reduced drag when coasting. ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to creating a faster, more stable wheel. Centre locking rotor interface. Lockring is included. XDR or SRAM/Shimano driver bodies (choose option from the menu). Ships with 12mm rear end caps. Campagnolo driver body sold separately.Manufacturer's Part Number: ZPWH8534000 Black 700c Shimano/SRAM ZPWH8534001 Black 700c SRAM XD SRAM XDRBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 303 Firecrest Carbon Tubeless Rear WheelZipp's 303 Firecrest Tubeless rim-brake rear wheel is an all-arounder for a new era of road riding. It's rich in heritage yet loaded with innovations. It's as adept in the mountains as it is on rolling hills, windswept farm lanes, or ferocious field sprints.Tubeless Ready Road Bike Rear WheelAt Zipp, they never rest on laurels. This rear wheel features a 19mm internal width and is tubeless ready. That means you can run lower tyre pressure for greater cornering grip and compliance with reduced rolling resistance without the risk of pinch flats.Lightweight Carbon with ABLC Sawtooth TechnologyWhen it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. It's lightweight with ABLC Sawtooth Technology, a complex dimpling pattern first developed for the brand's top-level NSW wheel lineup. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which they call AeroBalance.Rim Brake CompatibleZipp's ShowStoppertextured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the center of the 303 Firecrest Tubeless rim brake is a new versatile and durable hub, the German-engineered ZR1.Features: Rim Construction: Carbon with Hooks with UD Fibre finish and adhesive decals Rim Profile: Symmetrical Hub: ZR1 Rim Brake Wheel Size: 700c Tyre Compatibility: Tube-type or tubeless tyres Inner Rim Width: 19mm Rim Depth: 45mm Spoke Length: Drive Side: 254mm, 260mm; Spoke Length Non Drive Side: 254mm, 264mm Tyre Pressure: 125psi Freehub: Multiple options available to select Weight: 1530gKey Features: Zipp graphics and cosmetic identity that scream speed New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes Tubeless ensuring secure performance even when ridden at lower tire pressures Versatile 45mm rim profile that's fast, stable and versatile ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions XDR or SRAM/Shimano driver bodies available to select Ships with QR end caps, quick-release skewers Campagnolo driver body sold separatelyTechnologies: Showstopper: Our industry-leading Showstopper brake track continues to evolve and improve, providing unmatched stopping power and modulation regardless of weather conditions or the length of the descent. ABLC Sawtooth: ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel. AeroBalance: Zipp's sole mission is to help you go faster. That's why our wheels are race-ready before they're camera-ready. For years, Zipp has used a combination of testing methods - wind tunnel, CFD computer simulations, pro athlete evaluations, on-road testing, and the RollingRoad ride simulator - to refine aero performance to new levels of excellence. Over the decades of innovation, our engineers have learned to look beyond just focusing on simply reducing aero drag. Instead, the goal now is to reduce aero drag while also minimizing the effects of crosswinds on handling. This optimising of aero efficiency and crosswind stability became known internally at Zipp as AeroBalance. The approach began with Firecrest technology and has been advanced with the introduction of the NSW lineup, especially with the Sawtooth technology found in the 454 and 858 NSW. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with our new HexFin ABLC dimples for improved airflow.Manufacturer's Part Number: ZPWH8532001 Black 700c SRAM XD SRAM XDR ZPWH8532000 Black 700c Shimano/SRAMBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 303 Firecrest Carbon Tubeless Rear WheelZipp's 303 Firecrest Tubeless rim-brake rear wheel is an all-arounder for a new era of road riding. It's rich in heritage yet loaded with innovations. It's as adept in the mountains as it is on rolling hills, windswept farm lanes, or ferocious field sprints.Tubeless Ready Road Bike Rear WheelAt Zipp, they never rest on laurels. This rear wheel features a 19mm internal width and is tubeless ready. That means you can run lower tyre pressure for greater cornering grip and compliance with reduced rolling resistance without the risk of pinch flats.Lightweight Carbon with ABLC Sawtooth TechnologyWhen it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. It's lightweight with ABLC Sawtooth Technology, a complex dimpling pattern first developed for the brand's top-level NSW wheel lineup. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which they call AeroBalance.Rim Brake CompatibleZipp's ShowStoppertextured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the center of the 303 Firecrest Tubeless rim brake is a new versatile and durable hub, the German-engineered ZR1.Features: Rim Construction: Carbon with Hooks with UD Fibre finish and adhesive decals Rim Profile: Symmetrical Hub: ZR1 Rim Brake Wheel Size: 700c Tyre Compatibility: Tube-type or tubeless tyres Inner Rim Width: 19mm Rim Depth: 45mm Spoke Length: Drive Side: 254mm, 260mm; Spoke Length Non Drive Side: 254mm, 264mm Tyre Pressure: 125psi Freehub: Multiple options available to select Weight: 1530gKey Features: Zipp graphics and cosmetic identity that scream speed New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes Tubeless ensuring secure performance even when ridden at lower tire pressures Versatile 45mm rim profile that's fast, stable and versatile ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions XDR or SRAM/Shimano driver bodies available to select Ships with QR end caps, quick-release skewers Campagnolo driver body sold separatelyTechnologies: Showstopper: Our industry-leading Showstopper brake track continues to evolve and improve, providing unmatched stopping power and modulation regardless of weather conditions or the length of the descent. ABLC Sawtooth: ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel. AeroBalance: Zipp's sole mission is to help you go faster. That's why our wheels are race-ready before they're camera-ready. For years, Zipp has used a combination of testing methods - wind tunnel, CFD computer simulations, pro athlete evaluations, on-road testing, and the RollingRoad ride simulator - to refine aero performance to new levels of excellence. Over the decades of innovation, our engineers have learned to look beyond just focusing on simply reducing aero drag. Instead, the goal now is to reduce aero drag while also minimizing the effects of crosswinds on handling. This optimising of aero efficiency and crosswind stability became known internally at Zipp as AeroBalance. The approach began with Firecrest technology and has been advanced with the introduction of the NSW lineup, especially with the Sawtooth technology found in the 454 and 858 NSW. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with our new HexFin ABLC dimples for improved airflow.Manufacturer's Part Number: ZPWH8532001 Black 700c SRAM XD SRAM XDR ZPWH8532000 Black 700c Shimano/SRAMBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp’s 808 Firecrest® Tubeless Disc-wheelset is pure engineering science. It has to be. To achieve speed with an 82mm rim depth is one thing but to be fast while offering high crosswind stability well that requires serious attention to detail. Yet that’s just what the 808 Firecrest Disc brake accomplishes – speed with stability and tubeless compatibility. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance without the risk of pinch flats. You also get the greater stopping power of disc brakes. This wheelset is infused with technologies developed in Zipp’s Indianapolis advanced development lab. Zipp’s ABLC™ Sawtooth™ Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 808 Firecrest Tubeless Disc-brake is a versatile and durable new hubset the German-engineered ZR1 DB. Zipp’s new wheel cosmetics make this wheelset a perfect pairing of speed and style. FEATURES Zipp graphics and cosmetic identity that scream speed ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes An all-out aero 82mm rim profile that’s tubeless ready for increased speed and better cornering control and comfort ABLC Sawtooth™ dimple design helps manage air flow around the rim and contributes to create a faster more stable wheel Center locking rotor interface. Lockring is included XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Campagnolo driver body sold separately Superior modulation and stopping power of disc brakes SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Disc (Center Lock) DRIVER BODY TYPE n/a SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 19mm RIM FINISH UD fiber Impress technology RIM PROFILE Symmetrical SPOKE LENGTH DS 226mm 232mm SPOKE LENGTH NDS 230mm WEIGHT (G) 1917 WEIGHT BASED ON Wheel set in lightest configuration: 12mm through axles and XDR body. No tape or valve included. Front: 898g Rear: 1019g
Zipp’s 808 Firecrest® Tubeless Disc-wheelset is pure engineering science. It has to be. To achieve speed with an 82mm rim depth is one thing but to be fast while offering high crosswind stability well that requires serious attention to detail. Yet that’s just what the 808 Firecrest Disc brake accomplishes – speed with stability and tubeless compatibility. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance without the risk of pinch flats. You also get the greater stopping power of disc brakes. This wheelset is infused with technologies developed in Zipp’s Indianapolis advanced development lab. Zipp’s ABLC™ Sawtooth™ Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 808 Firecrest Tubeless Disc-brake is a versatile and durable new hubset the German-engineered ZR1 DB. Zipp’s new wheel cosmetics make this wheelset a perfect pairing of speed and style. FEATURES Zipp graphics and cosmetic identity that scream speed ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes An all-out aero 82mm rim profile that’s tubeless ready for increased speed and better cornering control and comfort ABLC Sawtooth™ dimple design helps manage air flow around the rim and contributes to create a faster more stable wheel Center locking rotor interface. Lockring is included XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Campagnolo driver body sold separately Superior modulation and stopping power of disc brakes SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Disc (Center Lock) DRIVER BODY TYPE n/a SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 19mm RIM FINISH UD fiber Impress technology RIM PROFILE Symmetrical SPOKE LENGTH DS 226mm 232mm SPOKE LENGTH NDS 230mm WEIGHT (G) 1917 WEIGHT BASED ON Wheel set in lightest configuration: 12mm through axles and XDR body. No tape or valve included. Front: 898g Rear: 1019g
Zipp’s 808 Firecrest® Tubeless Disc-wheelset is pure engineering science. It has to be. To achieve speed with an 82mm rim depth is one thing but to be fast while offering high crosswind stability well that requires serious attention to detail. Yet that’s just what the 808 Firecrest Disc brake accomplishes – speed with stability and tubeless compatibility. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance without the risk of pinch flats. You also get the greater stopping power of disc brakes. This wheelset is infused with technologies developed in Zipp’s Indianapolis advanced development lab. Zipp’s ABLC™ Sawtooth™ Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 808 Firecrest Tubeless Disc-brake is a versatile and durable new hubset the German-engineered ZR1 DB. Zipp’s new wheel cosmetics make this wheelset a perfect pairing of speed and style. FEATURES Zipp graphics and cosmetic identity that scream speed ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes An all-out aero 82mm rim profile that’s tubeless ready for increased speed and better cornering control and comfort ABLC Sawtooth™ dimple design helps manage air flow around the rim and contributes to create a faster more stable wheel Center locking rotor interface. Lockring is included XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Campagnolo driver body sold separately Superior modulation and stopping power of disc brakes SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Disc (Center Lock) DRIVER BODY TYPE n/a SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 19mm RIM FINISH UD fiber Impress technology RIM PROFILE Symmetrical SPOKE LENGTH DS 226mm 232mm SPOKE LENGTH NDS 230mm WEIGHT (G) 1917 WEIGHT BASED ON Wheel set in lightest configuration: 12mm through axles and XDR body. No tape or valve included. Front: 898g Rear: 1019g