As recently as the late 1980s, professional road cyclists would wear a pair of socks over their shoes while racing and training. Why did they do this? They would answer "It’s warmer, more aerodynamic, keeps my best shoes cleaner and looks better". Of course, one could argue that putting cotton socks over cycling shoes makes none of those possible. DeFeet crafted a solution that keeps windchill off the feet, creates smoother lines, keeps dirt out, looks better, and ultimately makes riders faster. Slipstream’s™ also last much longer than a pair of socks while barely costing more. And with the Reflective Stripe 4" Overshoes you'll be more noticeable on the road too. PLEASE NOTE - A small hole is required to be cut for your shoe cleat - NOT waterproof, these overshoes are designed to reduce windchill - Low temperature wash only - Not suitable for tumble dryer use - This item comes as a pair
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Even in dense cities with dozens of bike shops, riders often find themselves far away from home or a bike shop. Having the right multi-tool can be the difference between reaching your destination on time or taking the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to design the Trixie, the ultimate multi-tool for the fixed-gear urban rider..Pedro's Trixie is laser cut from 5mm thick heat-treated tool steel for the ultimate in strength and long-lasting performance. .The tool's 187mm (7.4in) length and ergonomic shape give outstanding leverage and comfort. .Best of all, the Trixie mounts to your water bottle mounts with included wing nuts ensuring you always have your tool when you need it..The Trixie features a 4mm/5mm hex bit in a rubber holder, 8, 9, 10, and 15mm box end wrenches, lockring wrench, and bottle opener..
Long days in the saddle training and racing take their toll on your equipment. The Topeak Tri-Backup Tyre Bag provides protection from harmful ultraviolet rays that can quickly degrade a tubular tyre. So, the next time you have to replace your tubular tyre, it s ready to go. Designed to integrate with Tri-Backup Pro V and Tri-Backup Pro I for maximum aerodynamic efficiency. It s also got side pockets to store up to four CO2 cartridges.Material: 420D NylonMount: Works with TRI-backup Pro V / Pro I / Top tube / Saddle railsCompatibility: Up to 700 x 25c tubular tire (Max folded length 8.7 cm / 3.4 )Round Tube: Diameter fits ø23 - ø48 mmAero Tube: Fits up to 260 mm (10.2 ) circumferenceAdded features: Side pockets for up to four 16g CO2 cartridges Zipper docksSize: 25.8 x 7.8 x 4.6 cm / 10.2 x3.1 x 1.3 Weight: 107 g / 3.77 oz (Bag only)
The Strike Jersey has evolved from the previous edition. The new garment with its unique inserts is made using a breathable polyester base with a contrasting microdot. It features a mix of three fabrics for maximum comfort. Fine-tuned in the critical points, this article is also available in long-sleeve and sleeveless versions. Features Mix of 3 textured fabrics for maximum comfort Raw-cut sleeve Garment with inserts and contrast microdot 3 back pockets
The Strike Jersey has evolved from the previous edition. The new garment with its unique inserts is made using a breathable polyester base with a contrasting microdot. It features a mix of three fabrics for maximum comfort. Fine-tuned in the critical points, this article is also available in long-sleeve and sleeveless versions. Features Mix of 3 textured fabrics for maximum comfort Raw-cut sleeve Garment with inserts and contrast microdot 3 back pockets
Asymmetric four arm shape for greater stiffness in the power zones of the pedal stoke. Compatible with: 9 / 10 / 11 speed chains. Arm x BCD: 4 x 110 Asymetric. Colour: Black.
The Strike Jersey has evolved from the previous edition. The new garment with its unique inserts is made using a breathable polyester base with a contrasting microdot. It features a mix of three fabrics for maximum comfort. Fine-tuned in the critical points, this article is also available in long-sleeve and sleeveless versions. Features Mix of 3 textured fabrics for maximum comfort Raw-cut sleeve Garment with inserts and contrast microdot 3 back pockets
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors