With 500 lumens and excellent side visibility the SYNC Core gives you the power to see and be seen. Can be used alone or – better still – combined with other CatEyeSYNC™ enabled lights for unparalleled levels of 360-degree visibility day or night. Compact and lightweight high power rechargeable headlight (500lm) Excellent daytime visibility in Daytime HyperConstant mode Superior side visibility Round beam pattern with OptiCube™ lens technology Built-in fast recharging circuit Lithium-ion rechargeable battery USB rechargeable (Micro-USB cable included) 5 light modes * Charging time: 3-6 hrs Mode memory function FlexTight™ bracket Optional helmet mount center fork bracket and out-front bracket 2 available *The smartphone CatEyeSYNC™ app is required to pair the lights. Before you purchase be sure to check to see if your smartphone model is compatible. CatEyeSYNC™ Compatible Device ListPC or Mac with internet connection is required for firmware update of the CatEyeSYNC™ lights.
The BBT-22 is a shop quality tool for installing and removing Shimano and ISIS Drive splined twenty-tooth bottom bracket cupsMade from investment cast steel the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cupCan be turned with a 3/8 inch drive torque wrench 3/8 inch ratchet driver 32mm wrench 1 inch wrench or FRW-1 Freewheel Remover WrenchNote: The BBT-22 replaces the previous model BBT-2
RideSense 2.0 Speed & Cadence Magnet Set is used to transmit speed and cadence data to the RideSense 2.0 unit. Comes with an additional mount for the cadence sensor fitting most cranks and rounded or aero bladed spokes.FEATURESMaterial: Hardened plasticUse: with RideSenseFeatures: Speed and cadence magnetsExtra: Additional mount for cadence magnetFits: Bladed and round spokes most crank arms
The Sawtooth is THE adventure tire of choice developed to handle any road surface and to be tough enough to withstand the rigors of exploration. The tread offers sharp angles and edges to hook onto any surface while the Endurant casing reinforces the sidewall for added protection and high carrying loads. Meanwhile our legendary GRIPTON® compound offers reliable grip and control and the centre tread is reinforced for high mileage. Lastly this iteration can be set up tubeless so you're able to run lower pressures for added grip and traction while also reducing the risk of pinch flats. Casing: 120 TPI Bead: Foldable Butyl wrapped bead = 2Bliss Ready Compound: GRIPTON® Flat Protection: Endurant Casing and BlackBelt 700 x 38mm psi 50-80 approximate weight 500g 700 x 38mm psi 50-80 approximate weight 500g 700 x 42mm psi 50-80 approximate weight 615g 700 x 42mm psi 50-80 approximate weight 615g
Giant ANT+ RideSense and Bluetooth Sensor fits Giant RideSense compatible frames only and allows you to transmit speed and cadence data to any ANT+ or Bluetooth device.FeaturesHardened PlasticTransmit Ant+ or BluetoothSpeed and Cadence SensorFits Giant Ride Sense Compatible bicyclesComes with speed and cadence magnetsSizesFits Giant Ride Sense Compatible Bicycles.
Economical and compact this version of the BBT-22 tool is perfect for the home mechanicThe BBT-32 installs and removes Shimano and ISIS Drive 20-tooth splined bottom bracket cupsFeatures 32 mm wrench flats
Unlike other similar products, Wolf Axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. Always apply a small amount of grease to the washer and threads when installing. Compatibility: Road and cyclocross forks using 100 mm hub with 12mm axle.,. Tech Specs: Material: 7075-T6 aluminum, stainless steel washer,Tool Interface: 5mm and 6mm hex key,Torque Spec: 12 Nm max,Made in the USA.
Wolf Tooth's line of axles has just received two new additions, they now offer axles that are compatible with the Syntace X-12 System. The primary difference that distinguishes these axles from our other axles is the conical washer, where our other axles have a flat washer. Any bicycle brand that uses the Syntace X-12 System will also be able to use these new axles, which includes many models from Specialized, Cannondale, Intense, 3T, Canyon, and others.When developing the Rear Axle, Wolf Tooth engineers knew that they wouldn’t be able to get away with any old factory replacement part, even if it was made in Minnesota to aerospace standards. The Wolf Tooth Rear Axle uses a captive conical stainless steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. Compatibility: 12mm Rear Thru Axle for Syntace X-12 system,Axle length is compatible +/- 2mm,Axle length is independent of hub dimensions. Please use the axle measurement guide to find the axle length needed. Make sure to print it at 100% for accurate measurements. Tech Specs: Weight: 159 • 42g | 165 • 43g,Material: 7075-T6 aluminum, stainless steel conical washer,Diameter: 12mm,Thread Pitch: 1mm,Thread Length: 12mm,Tool Interface: 5mm and 6mm hex key,Torque Spec: 12 Nm max,Made in the USA.
The Wolf Tooth Wolf Axle for Fox MTN Forks is lightweight, durable and available in a variety of vivid colours. If you’re replacing a worn stock axle or are looking for a coloured upgrade this is a sound investment.In choosing to use a captive steel washer under the axle head, Wolf Tooth has found a way to protect your axle head but more crucially, your forks. The steel washer rotates within the axle but stays secured to the head, meaning that creaks and squeaks are a thing of the past as the steel washer provides intermediary contact between fork and axle.Key Features:Fits rock shox suspension forks 100mm (standard) or 110mm (boost),Fits a wide range of fat rigid forks with 150mm hubs,Not compatible with rs-1 forks,Handcrafted by wolf tooth in Minneapolis, USA,Machined from 7075-t6 aluminium,Thread length: 15mm,Easily adjusted with a 6mm hex key.
The Wolf Tooth Wolf Axle For 12mm Rear Thru-axle Is Lightweight, Durable And Available In A Variety Of Vivid Colours. If You're Replacing A Worn Stock Axle Or Are Looking For A Coloured Upgrade This Is A Sound Investment.In Choosing To Use A Captive Steel Washer Under The Axle Head, Wolf Tooth Has Found A Way To Protect Your Axle Head But More Crucially, Your Frame. The Steel Washer Rotates Within The Axle But Stays Secured To The Head, Meaning That Creaks And Squeaks Are A Thing Of The Past As The Steel Washer Provides Intermediary Contact Between Frame And Axle.If You Value Frame Longevity And Want To Add An Extra Flair To Your Ride, Then The Wolf Axle Is Ideal.Key Features:Fits Frames With A 12mm Rear Thru-axle,Handcrafted By Wolf Tooth In Minneapolis, USA,Machined From 7075-t6 Aluminium,Easily Adjusted With A 6mm Hex Key.
The Wolf Tooth Wolf Axle Cap For 12mm Rear Thru-axles Not Only Protects Your Cherished Frames From Rock Scrapes, Scratches And Tough Terrain But Adds A Flicker Of Anodised Colour.Inexpensive To Replace And Fitting Into A Dedicated Recess In The Wolf Tooth Rear Thru-axle This Is A Nifty Addition To Your Ride.Simply Install And Remove With An 8mm Hex Key.
Key Features:The wolf tooth trainer caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Simply screw the caps into a wolf tooth 12mm rear thru-axle and get training.,Ideal for winter workouts when you want to stay on top of your game.,*only compatible with wolf tooth rear-axles and do not fit onto santa cruz nomad (2014 - present), hightower (2016 - present), blur (2018 - present).