The Wolf Tooth ReMote Clamp Conversion Kit allows you to attach a Wolf Tooth ReMote Dropper Lever to a specific handlebar diameter or brake lever. This option is specifically designed for use with SRAM Matchmaker X. Genuine Wolf Tooth spare parts. Manufacturer's Part Number: WTMMCONVKIT Black One Size
Wolf Tooth 104 BCD Stainless Steel ChainringReady for adventure, this solid component is compatible with 104 BCD crankset for a perfect fit. It features Wolf Tooth's patented Drop Stop technology which uses a narrow/wide tooth pattern to improve chainring life. This superb version's wide side of the tooth has maximum contact on the drive side which spreads the load while its narrow side allows for mud and debris clearance. Compatibility:These are functionally the same as the aluminium 104 BCD rings. These rings fit any 104 BCD crankset, and here are instructions on how to measure your BCD. Notes for those the plan to run a 32t chainring on a 2x Shimano crankset (XT, SLX, or Deore). 30t x 104 ring is the only Quarq power meter compatible 30t ring available.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Chainline: Chainline (approximate as BB centering and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2xChainring bolts are required for 1x 104 x 30t - use 10mm bolts 104 x 32t uses 6mm chainring bolts If mounting a 104 BCD bashring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets. Features: Material: Hardened and electropolished 416 Stainless Steel Use: MTB BCD: 104 Tooth Pattern: Wide/Narrow Weight: 30T: 72g; 32T: 88gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The wolf tooth stainless steel single speed cog utilises extra tall teeth for reliable chain retention when using a chain tensioner. Fitting perfectly onto any shimano freehub, this cog is optimised for 9, 10 or 11-speed chains but will work with all chains.Machined in-house at wolf tooth's Minnesota hq from ultra-durable heated treated and electropolished 416 stainless steel, this is a remarkable exercise in top-tier precision engineering. If you're looking for a single speed cog to outlast all others, this is a sure bet.Compatibility:These will fit on any shimano-type freehub spline (geared or single speed),Designed to work with any chain,Tooth width optimized for 9-,10-, and 11-speed chains.
The Wolf Tooth Ultralight Stem Cap With Integrated Spacer Is Sleek, Subtle And Aesthetically Refined. If You Value Every Single Detail Of Your Ride Then Elevate It To A Celestial Realm With This Beautiful Stem Cap.Machined By Wolf Tooth In Their Minneapolis Hq Using Premium-grade 6061-t6 Aluminium, This Is A Great Addition To Any Top-end Build.Many Carbon Steerers Require You To Run The Steerer Tube Above The Top Of The Stem, And You May Want To Keep Your Steerer Uncut For Different Riding Setups, Or Future Resale. This Stem Cap Offers A One-piece Solution And Looks Fantastic In A Raft Of Anodised Colours.
The Wolf Tooth Supple Bar Tape has been designed specifically for riding over gravel, trails, and the most unforgiving terrain. The bar tape is extra thick and wide compared to standard tape, meaning it provides far more comfort and can cover wide and flared gravel-specific drop bars as well as standard drops. The 100% silicone compound is the same that Wolf Tooth uses for its Fat Paw Grips, which are renowned in the mountain biking community for their vibration dampening qualities. The extra tacky texture provides ample grip with or without gloves in all weather conditions. It also helps the tape stick to the bars without the usual adhesive backing common on regular bar tape. Key Features: Designed for taking drop bars across unforgiving terrain,5mm thick and 40mm wide. Thicker and wider than standard bar tape,100% silicone compound. The same compound as Wolf Tooth’s Fat Paw Grips,The washable surface is resistant to wear,Tacky texture keeps your hands from slipping with or without gloves,Self-fusing silicone for a clean and durable result,106g per roll,152cm long.
Key Features:This wolf tooth t25 Torx l-wrench enables you to remove/install SRAM direct mount chainrings. Built explicitly to make the process more simple and reduce damage to the bolt head, this is a great addition to your toolkit..
Key Features:Compatible with a wide range of road, gravel and cyclocross bikes,If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version which is also available. This is because the tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the tanpan barrel adjuster..
Wolf Tooth Tanpan Shimano AdaptorOffering the potential of a greater gear range and superior chain security, this adaptor enables you to run 10 speed Shimano MTB rear derailleurs with your 10 speed road shifters. This makes it ideal for riders who want to convert their drop bar set up to 1x. It works by amplifying your road shifter cable pull, giving you the potential to run a mountain bike rear derailleur. If you're looking to run a single chainring up front but with the gear range of a double - or want to retain a double and run super-low gears for ultra-steep hill mountain climbs, this is the upgrade for you.Easily installed in minutes and simply tucking above your rear derailleur, the Tanpan can be adjusted with its indexed barrel.CompatibilityCompatible with a wide range of road, gravel and cyclocross bikes.If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster.Features: Use: MTB, Road, Gravel and Cyclocross Speed: Multiple options available to select separately Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Shimano adaptor is perfect for riders who want to convert their drop bar set up to 1x. It works by amplifying your road shifter cable pull, giving you the potential to run a mountain bike rear derailleur. If you’re looking to run a single chainring up front but with the gear range of a double – or want to retain a double and run super-low gears for ultra-steep hill mountain climbs, this is the upgrade for you. Easily installed in minutes and simply tucking above your rear derailleur, the Tanpan can be adjusted with its indexed barrel. Compatibility Compatible with a wide range of road, gravel and cyclocross bikes. If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster.
Bottle cage bolts for strength and a bit of flash. These M5x15mm titanium water bottle cage bolts are stronger than aluminium bolts and are a solid upgrade for cyclists who carry cargo by bolting it to their frame. They are sold in packs of four.Key FeaturesCompatible with any bike with standard water bottle cage braze-ons,Max torque: 6 Nm,Wolf Tooth recommends applying a small amount of copper grease to threads before installing.
Bottle cage bolts for strength and a bit of flash. These M5x15mm titanium water bottle cage low profile bolts are stronger than aluminium bolts and are a solid upgrade for cyclists who carry cargo by bolting it to their frame. They are sold in packs of four.Key FeaturesCompatible with any bike with standard water bottle cage braze-ons,Max torque: 6 Nm,Wolf Tooth recommends applying a small amount of copper grease to threads before installing.
Key Features:Ripstop nylon and durable cordura fabrics,Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (workspace), rolled up diameter size varies,Anodized aluminium eyelets for hanging,Weight - 600g,Tools not included.