Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This lever and cable conversion kit is specifically designed for mountain bike (MTB) riders who have a Rockshox B-post and a SRAM matchmaker clamp. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category. UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTESUSBMM
By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility: Compatible with Rockshox Reverb B Spec Stealth (internal) routing dropper posts. NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Wolf Tooth RockShox Reverb Sustain Dropper RemoteThis remote sustain is used to simplify the actuation system, accelerate return speeds, improve tactile feedback and reduce level throw for a better ride. By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility:Compatible with RockShox Reverb B Spec Stealth (internal) routing dropper posts. Not compatible with A1 spec Reverbs. Not compatible with non-Stealth (externally routed hydraulic hose). ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Features: Clamp Diameter: 22.2mm Dropper Post Compatibility: Rockshox Reverb B Spec Stealth internally routed NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) Manufacturer's Part Number: WTREMOTESUSBCLMPBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Seat Clamps Are Precision-engineered At Wolf Tooth's Hq In Minnesota – Perfectly Aligned Threads And A Consistent Clamping Force Offer A Great Way For You To Care For Your Beloved Frame Whilst Adding A Flash Of Anodised Colour.The M5 Bolt Includes A Spherical Washer Which Meshes Seamlessly With The Cylindrical Barrel Anchor For An Unrivalled Clamp. Constructed From Premium-grade 6061-t6 Aluminium And Weighing Only 20g.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Available in a range of colours to match your frame or components colour scheme, the Wolf Tooth bolt-on seatpost clamp has a self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.