Specification: Functions: 37 pieces.,Size: 470 x 370 x 130mm.,Weight: 8.2 kg.,. Contains: Torx Key Set:T10 / T15 / T20 / T25 / T27 / T30 / T40,Hex Key Set: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10mm,Chain Wear Indicator:0.5% / 0.75% / 1%,Tyre Lever Set ,Bladed Spoke Grip ,Valve Core Tool:(Presta/Schrader),Socket:T30,Shimano Cartridge B.B. Tool ,Shimano HG Cassette:Fits Shimano® & SRAM®,Shimano MF Freewheel ,Universal Crank Puller:For ISIS Drive® & Octalink® crank arms,Cable Cutter ,Hollowtech ll BB Socket:For 16 external notches Ø44mm Also fits rotor lockrings and Shimano BB Tool Adaptors TL-FC24 & TL-FC25.,Socket Wrench:For 1/2" Drive hex bit sockets,Crank Arm Installation Tool 8-notch Hollowtech:And 16mm internal hex SRAM® crank caps.,Spoke Wrench:12 / 13 / 14 / 15G / Shimano® 4.3 / 4.4,Chain Rivet Extractor:5-12 speed, 1/8" and 3/32", single speed chains,Pedal Wrench:15mm,Chain Whip:7-12 speed,Flathead Screwdriver:5.5,Crosshead Screwdriver:#2,Combination Wrench:8/10mm,File ,Link Pliers ,Hex Keys:14mm & 15mm,Shifting Spanner: 0-33mm,Disc Brake Piston Press ,Rotor Truing Fork:For hydraulic brake systems,Disc Brake Gap Indicator ,Threadless Saw Guide:1", 1 1/2" & 1 1/4",Threadless Nut Setting Tool: 1/2",Diagonal Pliers:6",Chainring Nut Wrench ,Radio Pliers:6",Dead Blow Hammer ,Tape Measure:3m/10ft.
Features:We started from the ground up literally to create what we believe is the finest folding stand available. Lightweight, stable and packed with features.100-25D Professional Micro Adjust Clamp quickly clamps and releases nearly any tube from 7/8 inches to 3 inches (23-76 mm), including aero tubes.Fully adjustable clamping pressure.Narrow clamping jaws (2.7 inches/7 cm) fit into tight areas or on short seat posts.360 degree clamp rotation.Soft, durable composite rubber clamping pads.Saddle cradle gives a perfect spot to temporarily rest a bike by its saddle.Three-point leg system creates a stable base on smooth or rough surfaces.Quickly and easily folds to 47 inches.Clamping height adjusts up to 60 inches.Proprietary Hexatude hex-shaped aluminium tubing ensures low flex and no rotation.Aluminium leg straps ensure all parts slide, fold and unfold together.Weighs just 13 pounds (6 kg) .Made in the USA and covered by Park's legendary limited lifetime warranty
A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit as well as a quick-release height adjustment lever for easy secure adjustment. Featuring 18' (460mm) of height adjustment and 360 degrees of clamp rotation positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability with tubular support braces a locking support yoke and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg) which allows for compatibility with virtually all two-wheeled pedal-driven bicycles including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8' to 3' (22mm - 76mm) diameter tubes and seat posts of any shape and material including aero posts and dropper posts Narrow clamping jaws (2.7'/70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39' to 57' (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36' x 36' x 48' (920mm x 920mm x 1210mm) Folds down to 45' x 14.5' (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs
Key Features: The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots,A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters,Combined with our proven bearing press design, the SBK-1 quickly and easily pushes ,the old bearing out of the linkage, and reinstalls the new bearing precisely and squarelyOrganized in a convenient storage case to keep everything in one place,NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
The PRS25 workstand from Part Tool is a fantastic stand for putting up in the corner of the workshop as your "at home" stand or with it's easily foldable legs it is a great stand to have in the van as your trailside mate that is quick to put up and for those pre ride checks or quick fixes.Fully adjustable clamping pressureNarrow clamping jaws (2.7 inches / 7 cm) fit into tight areas or on short seat posts.360 degree clamp rotation
Base for Park Tool PRS2OS Deluxe Double Arm Repair Stand
Park Tool Professional Wheel Truing Stand TS-2.3The Professional Wheel Truing Stand TS-2.3 from Park Tool is a workshop-quality wheel truing stand that is ideal for building bike wheels. Ideal for wheel truing up to 29"+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup.Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason.With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters.The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.Features: Wheel Capacity: Maximum wheel size: Up to 29"+ with or without tyre Maximum Hub Width: 200 mm (7.87") Maximum Rim Width: 102 mm (4") Hub Compatibility: Accommodates quick release and solid axle hubs - also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: Bolt to benchtop - mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center Clamp in vise - base is 76 mm (3") deep Install in TSB-2.2 Truing Stand BaseBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wheel Truing Stand TS-2.3deal for wheel truing up to 29""+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup. Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs, spring-loaded calipers, and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.
The Primer 18” is the ideal choice for riders who’ve outgrown a 16” but aren’t quite ready for a 20”. The shorter chain stay, lighter wheels and size-specific, pro-style frame geometry makes it the go- to bike for serious BMXers in this size range. The Primer is packed with quality parts like Odyssey Springfield Brakes and a fully sealed cassette hub for reliability that you can count on every time. ###section### Product Specs FRAME MATERIAL: Hi Ten Steel WHEEL SIZE: 18" TOP TUBE LENGTH: 18.5" CHAIN STAY LENGTH: 11.7-12" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 71° FORKS: Sunday Primer, 18" fork w/ 2-piece steerer tube and welded pre-load BARS: Sunday, 7.65 x 25.5", 12° backsweep, 1° upsweep, 2-piece STEM: Sunday Freeze front load, 48mm HEADSET: FSA integrated, 1-1/8" BRAKE MOUNTS: Welded U-Brake BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 28H, low-flange, loose-ball, 3/8" axle FRONT RIM: P-7X aluminum, 18", 28H REAR HUB: Sunday, 28H, sealed, 14mm axle w/ 9T Driver REAR RIM: P-7X aluminum, 18", 28H TYRES: Sunday Current, 18 x 2.2" (F & R) SPROCKET: Sunday Sabertooth V2, 25T, steel CRANKS: 140mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Wellgo platform, plastic SEAT: Sunday Badge, seat and post combo GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights 18" Wheels are great for riders just a bit too small to manoeuvre a full size 20" Bike (approx 3ft 4 - 4ft 4 / 100cm-130cm) Specifically designed for the smaller rider, just starting out in BMX Built around a pro-level geometry Strong and durable crankset High-quality aftermarket tires ###shogun-image-section###
The Park Tool PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.Weight Limit: The PRS-4.2-1 and PRS-4.2-2 Deluxe Bench Mount Repair Stands have a 100 lb. (45kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners can handle this amount of weight.Clamping height can be raised from 6.5 (16cm) to 16.25 (41cm) above the bench surfaceIncludes 100-3C Adjustable Linkage Clamp (clamps tubes up to 1-3/8)Clamp rotates 360 degreesHeavy gauge steel tubingChrome plated for durabilityMade in the USA and covered by Park Tool's legendary limited lifetime warranty
The Birzman Studio Tool Box is a collection of essential tools for high-quality bike maintenance designed to give the mechanic or home tinkerer an efficient and professional quality tool kit. Designed to make sure every job carried out is done to the highest standard, the Essential Tool Box includes 37 carefully selected tools in a spacious and well laid-out box to give you the best in quality tool for the job at hand. Includes:T10/T15/T20/T25/T27/T30/T40 torx keys1.5/2/2.5/3/4/5/6/8/10mm Hex Keys1/2" socket wrenchChain Wear IndicatorPatch kitTyre Lever SetBladed Spoke GripValve core toolT30 socketShimano Cartridge BB toolShimano HG Cassette toolShimano MF Freewheel toolUniversal ISIS/Octalink crank pullerCable Cutter16-notch 44mm Hollowtech II B.B. Tool8-notch Hollowtech and 16mm internal hex SRAM crank caps crank arm installation tool12G / 13G / 14G / 15G /Shimano 4.3 / 4.4 spoke wrenches5-12 speed chain rivet extractor8/10mm combination wrench15mm Pedal wrenchChain whipFlathead & Crosshead screwdriversFileChain link pliers14/15mm hex wrenches0-33mm adjustable wrenchDisc brake piston pressDisc brake gap indicator1 , 1 1/8 & 1 1/4 threadless saw guideThreadless nut setting toolDiagonal pliersChainring nut wrenchRadio pliersDead blow hammer3m/10ft tape measure
The Fairdale Lookfar 700c Bike makes cruising and commuting easy, it makes those mundane commutes fun and brings back the joy or riding a bike. Built for ease-of-use the Lookfar has 8 gears that can be switched through by one thumb shifter, wide reliable tyres are fast on the road and big enough to handle rougher terrain. The Lookfar boasts a durable steel frame that shares it's geometry with Fairdale's Weekender model, that's known for its all day comfort. It's loaded with high-quality parts like the FSA Tempo 1x Crankset, an FSA Sealed Integrated headset, Continental Ride Tour 700c tyres and Odyssey's Twisted PC pedals. ###section### Product Specs FRAME MATERIAL: 1020 Steel WHEEL SIZE: 29" TOP TUBE LENGTH: 575mm-606mm CHAIN STAY LENGTH: 440mm HEADTUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: 1020 Steel, 1 1/8” BARS: Fairdale Archer v3, Aluminum STEM: 70mm, Forged Aluminum HEADSET: FSA, Sealed Integrated, 45º/45º BRAKE MOUNTS: Caliper BRAKES: Aluminum, Dual Pivot, 55-75mm reach w/Quick Rels FRONT HUB: 36H, 3/8” Axle, Aluminum Shell, Looseball FRONT RIM: 700c, 36-Hole, Schrader Valve, Aluminum REAR HUB: 36H, 3/8” Axle, 8-Speed, Aluminum Shell, Looseball REAR RIM: 700c, 36-Hole, Schrader Valve, Aluminum TYRES: Continental Tour Ride, 700c x 42mm SPROCKET: 42t CRANKS: FSA Tempo 1X (S=165mm, M=170mm, L/XL=175mm) BB: FSA PEDALS: Odyssey Twisted PC SEAT: Fairdale GEARING: 8 speed WEIGHT: TBC ###section### Product Highlights Larger Wheels for that road bike performance with a BMX feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel High-quality aftermarket tires Great for cruising Responsive brakes