NS Bikes Movement 2 Dirt Jump BikeThe NS Bikes Movement 2 features a tough and lightweight alloy frame with X-Fusion suspension, a single-speed Salt by WTP drivetrain and disc brakes. Ideal for fast, controlled and smooth dirt jump (DJ) and trail riding performance, this bike is optimised for style, agility and fun.Lightweight, Strong and Reliable Alloy FrameEvery dirt bike in the Movement Dirt Jump line-up is optimised to send you higher and faster thanks to the dialed geometry first seen on NS’s legendary Decade frames. There are further subtle but effective upgrades and the stiffness and responsive flow is spot-on for advanced riders who get a buzz from hitting smooth dirt lines time and time again.26" Wheels and Disc Brakes for Speed, Agility and ControlPairing sturdy 26" wheels with a playful modern-geometry frame, this durable Movement 2 is a superb option for aspiring and experienced dirt jump riders. The oversized, butted frame tubes deliver a rigid and easy-to-handle performance with every jump and landing, with a Shimano MT410 hydraulic disc brake on the rear wheel adding impressive speed control and stopping power when going flat out.X-Fusion MIG RC Suspension with Boost Hub SpacingThe X-Fusion MIG RC suspension fork and NS Lick handlebar deliver precision handling and efficient steering while the combined Octane One Fat seat and post keeps you comfortable and well-supported when sitting back. Kenda Small Block tyres, wrapped around the NS Dirt wheels, give a cushioned and impact-absorbing experience as you hit the ramps at pace, making this high-end Dirt Jump bike a top choice for the modern freestyle trail rider.INTENDED USE CATEGORY 5Intended Use: DIRT JUMPBicycles and frames in this category can be used on all kinds of pumptracks and dirt jump trails. They are designed to withstand jumps that exert forces equivalent to jumping a bike onto a flat surface from a height of approximately 60cm. These bicycle should not be ridden on rough MTB trails.Features: Frame: NS AL6061-T6 custom formed and butted tubes, tapered integrated headtube, 135x10mm Forks: X-Fusion MIG RC, 100mm travel, 110x15mm Boost, 1.5T Headset: GW integrated tapered IS42/IS52, sealed bearings Stem: NS Chemical 25.4 Handlebar: NS Lick, 740mm Grips: NS Hold Fast Unlocked Seatpost: Octane One fat seat-post combo Saddle: Octane One fat seat-post combo Front Brake: Tektro MD-M300 Aries 160mm Rear Brake: Nutt Y-2-1, 160mm rotor Rims: NS Dirt 26”, 32h Spokes: Spokes w/14mm nipples Front Hub: NS 110x15mm (sealed bearings) Rear Hub: NS 135x10mm single speed, 10T driver Tyres Front / Rear: Kenda Small Block 8 26x2.1" Crankset: Salt by WTP tubular Chromoly (CrMo) 25T Bottom Bracket: Octane One external 68mm, w/Spanish bearings Pedals: NS Nylon Chain: PYC P510H, 1spd Weight: 12.1kgEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy NS Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Built to withstand the rigours of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the worldStand height and clamp position are firmly secured in place using Park Tools proven lock block system,Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use,The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp, with narrow clamping jaws and a dual-stage cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size,For a complete system, please order either QK130 base or QKFP2 to mount the stand directly to the floor,Features include:Maximum weight capacity: 120lbs. (54kg),Clamp capacity: 0.875 to 3 (22-76mm) diameter tubes, including aero tubes,Clamp jaws are nominally 2.75 (70mm) wide,Clamp height: adjustable from 50 to 62 (128-158cm),Includes #105 Cast Aluminium Work Tray and RPP-1 Repair Stand Post Protector.
Proper frame preparation is very importantThe HTR-1B combines reaming and / or facing of the head tube to create a perfect fit for most sizes of headset cupsThe HTR-1B comes complete with a 33.8 mm reamer and four different size pilots (29.8 mm 30.0 mm 33.8 mm and 36.8 mm)The reamer is used to clean out or increase the diameter of the head tubeMost often facing of the head tube for good cup fit is the objective and no reaming is required in which case the pilots can be used in place of the reamersThe unique quick-release quick-adjust feature allows you to slide the bottom portion on and off easily without the long threading processThis threading function of the tool can still be fine tuned whilst in useThe tapered centring cone unit rides on a bearing for extra smooth operationAll cutting surfaces are top quality and extra sharp
The Park Tool HTR1 Head Tube Reaming and Facing Set allows for proper frame preparation. The HTR1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm). There are cases when a reamer is required to clean out or increase the diameter of the head tube. Most times however, facing of the head tube for good cup fit is the objective. In this case, reaming is not necessary and the pilots can be used in place of the reamers to keep the tool straight and create a faced head tube. The unique part of the HTR1 is the quick-release, quick adjust feature. The bottom portion can slide off and on easily without the long threading process. This portion of the tool can still be fine tuned while in use. The tapered centering cone unit rides on a bearing for extra smooth operation. All cutting surfaces are top quality and extra sharp.
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Perfect for facing any thru-axle dropout setup and width, IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 accurately faces front and rear disc mounts to maintain and improve your braking quality. With telescopic axle adaptors for easy and adaptable use, and including a pair of IS Mount, post and Flat Mount cutters within its robust and convenient carry-case, this is a great bit of kit for any workshop or garage.
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
The Park Tool DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.Key Features:Use of the DT-5.2 helps ensure proper disc brake setup and performance.Faces any IS Mount, Post Mount or new Shimano.Flat Mount, including low clearance, chainstay mounts.Telescoping axle adapters allow use with any configuration of open or thru axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles).Precision machined parts.Includes two facing cutters--one for IS mounts and one for Post and Flat Mounts.
Key Features: Park Tool have put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle,A perfect way to start or add to your collection of shop quality bicycle tools,Now includes the latest volume of the Big Blue Book, BBB-4,The AK-5 includes a tough toolbox to protect your investment,All tools covered by Park Tool's legendary limited lifetime warranty.
The Primer has always been a serious starter-level bike specifically designed for affordability, reliability and durability. Now with an updated park specific geometry you can choose the perfect Primer model for what you ride. As we've come to expect from Sunday their bikes are always packed full of high-quality parts so no matter whether it's your first bike or an overdue upgrade you're gauranteed to get a quality ride. The Park model boasts an Odyssey G3 Gyro, M2 Trigger Lever and their Springfield Brake with Path Pro OEM Tyres, a fully sealed rear cassette, Sunday Freeze stem and an FSA Headset round off the Sunday Primer. ###section### Product Specs FRAME MATERIAL: WHEEL SIZE: 20" TOP TUBE LENGTH: 20.5" CHAIN STAY LENGTH: 12.7" - 13" HEADTUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° FORKS: Sunday Primer, 20" fork w/2-piece steerer tube and welded pre-load BARS: Sunday, 2-piece STEM: Sunday Freeze top load, 48mm HEADSET: FSA integrated, 48mm BRAKE MOUNTS: BRAKES: Odyssey Gyro G3 (Front), Odyssey Springfield U-brake (Rear) FRONT HUB: Sunday, 36H, low-flange, loose-ball, 3/8" axle FRONT RIM: P-7X aluminium, 20", 36h REAR HUB: Suynday, 36H, sealed, 14mm axle w/9T driver REAR RIM: P-7X aluminium, 20", 36h TYRES: Odyssey Path Pro OEM, 20" x 2.4" (Front & Rear) SPROCKET: Sunday Sabretooth V2, 25T, steel CRANKS: 160mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Wellgo platform, plastic SEAT: Sunday Badge, seat and post combo GEARING: 25/9 WEIGHT: 25.8lbs ###section### Product Highlights Gyro brakes allow the handlebars to turn a complete 360 Fitted with high-quality aftermarket components High-quality aftermarket tires ###shogun-image-section###
Optimised to be more accurate and easier to calibrate and setup, this versatile pro-level truing stand is robust and durable. It’s engineered to accurately self-centre virtually any diameter of wheel size (16" to 29") and any tyre width up to 5"+ without having to remove disc brake rotors. Precise, Accurate and Reliable Professional Wheel Truing Performance Featuring an immensely reliable and long-life construction, this Wheel Truing Stand is built of chrome-plated powder-coated heavy gauge steel and provides flex-free performance. Precisely adjustable and keeps wheels centred with its tall and movable uprights, this immensely accurate design also features direct-action truing calipers. These additional truing calipers allow you to work on the narrowest of rims to the fattest of tyres with superior accuracy with hassle-free functionality. Plus, it is equipped with all the frills you require for the ultimate-adjustability and wheel compatibility - including, a built-in Speed Knob to quickly change axle widths and thru-axle adaptors, and it's equipped with removable and replaceable nylon caliper tips to protect painted and anodised rims.