The Wolf Tooth Elliptical 110 BCD 4 Bolt Chainring for Shimano GRX is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Shimano GRX drivetrains, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Elliptical design,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,. Compatibility: Shimano GRX cranksets including RX600 and RX810, Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains .
Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you.Key Features: Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires.,Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires.,Ergonomic Wing handle with pressure relief valve.,Auto selecting SwitchHitter II technology.,Includes spare rubber seal for head.,Max pressure: 75 PSI (5.2bar),Volume-per-stroke: 508cc.
The multi-configurable, multi-functional mini ratchet tool kitPlease Note: Standard t-ratchet kit does not come with the red ti-torque torque measuring extension.
Key Features: Shop quality, adjustable torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components,Adjusts to apply 4, 4.5, 5, 5.5, or 6 Newton Meter (Nm) of torque when rotating clockwise,All metal construction for long life,Comfortable ergonomic composite moulded grip,Includes 3mm, 4mm, 5mm and T25 bits (stored in handle),1 1/4 inch drive,Magnetic socket retains bits,Assembled and calibrated at the Park Tool factory in St. Paul, Minnesota.
Park Tool Adjustable Torque Driver (ATD-1.2)Precisely adjust the pressure applied to your components, with this Adjustable Torque Driver from Park Tool. This tool will prevent any unnecessary harm through overtightening. Made from durable metal and including a comfortable handle with exceptional grip, it's an essential item for your workshop. Features:Adjustable: 4, 4.5, 5, 5.5, or 6 Drive: ¼ inch hex driveIncludes: 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
This on/off switch is specifically engineered for use with Shimano STEPs E-bikes. It features a compact, semi-integrated frame charging port and can be updated via the E-Tube project application. - Compact, semi-integrated frame charging port - Minimum frame open hole - Connector connection same as EW-SD50 Technologies: E-Tube: The E-TUBE platform's “Plug & play” and D-FLY wireless connections make it easier than ever to check the system's status, and apply customized settings to DI2 and SHIMANO STEPS components with a PC, tablet or smart phone. Wirelessly customize functions like SHIMANO SYNCHRONIZED SHIFT over Bluetooth® while out on a ride. Automatically checks for firmware updates on each startup to ensure all components are running the latest version. PC, smartphone and tablet applications can help you quickly diagnose errors and simplify the repair process. Beautiful visualization of your real-time SHIMANO STEPS riding data on your smartphone. Advanced all-weather design resists rusting, stretching, and freezing.
Fully adjustable to make work on your fasteners and bolts easier, this Park Tool Torque Driver features a metal construction and a comfortable, ergonomic composite moulded grip. The rotating torque gauge on the tool's handle can be turned by hand or by hex for the optimum fastening force. Four magnetic bits (3mm, 4mm, 5mm, and T25) are stored in the tool's handle for easy access, ready for attachment to the driver's socket. An all-metal internal construction, housed in an ergonomic composite material for exceptional grip, makes the Adjustable Torque Driver ATD-1.2 a brilliantly durable and efficient workshop companion.
By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility: Compatible with Rockshox Reverb B Spec Stealth (internal) routing dropper posts. NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Shop quality adjustable torque driver that limits torque applied to fasteners preventing overtightening and damage to lightweight components. Adjusts to apply 4 4.5 5 5.5 or 6 Newton Meter (Nm) of torque when rotating clockwise All metal internal construction for long life Comfortable ergonomic composite molded grip Includes 3mm 4mm 5mm and T25 bits (stored in handle) 1 1/4 inch drive Magnetic socket retains bits Assembled and calibrated at the PARK TOOL factory in St. Paul Minnesota
Wolf Tooth RockShox Reverb Sustain Dropper RemoteThis remote sustain is used to simplify the actuation system, accelerate return speeds, improve tactile feedback and reduce level throw for a better ride. By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility:Compatible with RockShox Reverb B Spec Stealth (internal) routing dropper posts. Not compatible with A1 spec Reverbs. Not compatible with non-Stealth (externally routed hydraulic hose). ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Features: Clamp Diameter: 22.2mm Dropper Post Compatibility: Rockshox Reverb B Spec Stealth internally routed NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) Manufacturer's Part Number: WTREMOTESUSBCLMPBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Includes:M3 x 0.5P - For dropout alignment screws.M5 x 0.8P - For water bottle, fenders.M6 x 1.0P - For anti-brakes and large fender bracket.M10 x 1.0P - For derailleur hanger.1/2" x 20TPI - For left/right pedal taps.9/16" x 20TPI - For left/right pedal taps..
The Wolf Tooth 104 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 104 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits any 104 BCD cranksets,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: (approximate as BB centring and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2x.Chainring bolts are required for 1x:104 x 30t - use 10mm bolts ,104 x 32t uses 6mm chainring bolts,If mounting a 104 BCD bash ring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets..