The Wolf Tooth ReMote Dropper Lever is ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Compatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.,ReMote for Hope is only compatible with Tech 3 brakes..Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation Instructions Compatibility: Compatible with all cable actuated dropper posts., Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware.,ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware.,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above),ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware.
A versatile digital scale built to accurately weigh bikes frames and componentsFeatures a unique hexagonal design enabling the scales to be clamped solidly into a repair standAlternatively the scales can be hung from a ceiling hook or branchMeasures in both pounds and kilograms to the tenth and includes a dual position silicone coated hanging hook
If you want the strongest, long lasting wheels, then you'll need to have tight and uniform spoke tension, and what better way to ensure they are tight than with the Park Tools TM1 - spoke tension meter Fitting almost any size, shape or material spoke the meter gives you a clear reading of the relative and and absolute spoke tension within a wheel. A must for every serious wheel builder.
Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Classic looking tool bag from the renowned Brooks leather workers, embossed with the Brooks logo and supplied in a soft touch pull cord bag. Uses two leather straps with simple buckles to secure to classic saddles with the two loops in the rear.
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
Patented Drop-stop® Wide-narrow Tooth Profile For Minimised Dropped Chains,Perfect For 1x Setups,Machined In-house At Wolf Tooth's Hq In Minnesota, USA,.CompatibilityThese Rings Fit Any Sram 76 Bcd Spider Or Specialized Stout Crankset.,Threaded For Standard M8 Chainring Bolts. For The Xx1 Spider, We Recommend 6mm Bolts (Or Any Short M8 Chainring Bolt). For The Stout Crankset, We Recommend The 10mm Bolts Or The Bolts That Come With The Crankset.,For 1x9, 1x10, 1x11 And 1x12 Drivetrains (Including Sram Eagle)Compatible With All 10-, 11-, And 12-speed Chains Except Shimano 12-speed Chains.,If Using A 9-speed Drivetrain Use A 10-speed Chain (Shifts And Works Well On A 9-speed Drivetrain And Fits The Ring Tighter For Better Chain Retention).,..
The new Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology. Key Features: Fits any 104 BCD crankset,The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.,Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.,Prevents premature ring and chain wear that can come from non-optimized profiles.,. Compatibility: Fits any 104 BCD crankset,Compatible with Shimano 12-speed Hyperglide+ chains,Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colors.,104 x 30t - use 10mm bolts,104 x 32t, 34t, 36t, 38t use 6mm bolts.,If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm),104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).
Brooks England Challenge Tool Saddle BagFits neatly onto any saddle that comes with bag loops (which are found as part of all Brook’s saddles) the bag is a fantastic, stylish bag that is aimed at being used to securely carry all the bike fixing tools you need. Made from the renowned Brooks leather the bag is highly durable and comes with a specialised buckle system that allows you to securely fasten together your tools to prevent rattling and potential abrasions.FeaturesDimensions: 168 x 40 x 70mmComes with special strap design to prevent rattlingBuy Brooks England Bike Bags from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Challenge Tool Saddle BagFits neatly onto any saddle that comes with bag loops (which are found as part of all Brook’s saddles) the bag is a fantastic, stylish bag that is aimed at being used to securely carry all the bike fixing tools you need. Made from the renowned Brooks leather the bag is highly durable and comes with a specialised buckle system that allows you to securely fasten together your tools to prevent rattling and potential abrasions.FeaturesDimensions: 168 x 40 x 70mmComes with special strap design to prevent rattlingBuy Brooks England Bike Bags from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Challenge Tool Saddle BagFits neatly onto any saddle that comes with bag loops (which are found as part of all Brook’s saddles) the bag is a fantastic, stylish bag that is aimed at being used to securely carry all the bike fixing tools you need. Made from the renowned Brooks leather the bag is highly durable and comes with a specialised buckle system that allows you to securely fasten together your tools to prevent rattling and potential abrasions.FeaturesDimensions: 168 x 40 x 70mmComes with special strap design to prevent rattlingBuy Brooks England Bike Bags from Chain Reaction Cycles, the World's Largest Online Bike Store.