The Wolf Tooth 120 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweakerBred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 120 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings fit any 120 BCD crankset or 4-bolt spider.,For SRAM cranksets you must use the stock M10x.75 bolts with a shoulder on them. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings).,The only other supplier of these M10 x .75 bolts is Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones.,36t is the smallest number of teeth that fits on a 120 BCD.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline - 51mm for 36t and 52mm for 38t (38t is wider for more chainstay clearance).
The Wolf Tooth 110 BCD Flat Top Cyclocross and Road Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from a cyclocross, gravel or road bike, this Wolf Tooth 110 BCD Flat Top Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings are for use with 110 BCD 5 arm cranksets.,They do not fit on the cranksets for Shimano DA 9000 / Ultegra 6800.,Not compatible with Campagnolo CX10/11.,Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position.,Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting..Chain Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9-speed, 10-speed, and 11-speed chains. They also work with 12-speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Optimal chainline varies - these rings can be mounted in either the big or small ring position on double cranksets. The most common mounting is in the big ring position because of chainstay clearance..
The Wolf Tooth 130 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and designed to work your road or cyclocross bike, the Wolf Tooth 130 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings are for use with 130 BCD 5 arm cranksets. ,Does not fit on the cranksets for Shimano DA 9000 / Ultegra 6800,Not compatible with Campagnolo CX10/11..Chain Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9-speed, 10-speed, and 11-speed chains. They also work with 12 speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention.,Sram Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. ,Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position..38T important note: The chain may contact the spider arm slightly when using the 38T chainringWe recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring....
Park Tool Shop Cone Wrench Set (SCW-SET.3)This essential Wrench Set from Park Tool has all the wrenches you need for your workshop. It includes all the cone wrenches that Park Tool has created from 13mm all the way up to 28mm and features its unique "Y" design for enhanced durability and control. A military-grade industrial phosphate finish and precision sizing ensure an accurate fit and consistent quality on even the narrowest of adjusting cones. For leverage and comfort, Park Tool cone wrenches have a long, vinyl dipped handle.A cone wrench is used to access the flats on axles that are too narrow for a regular wrench. Good quality cone wrenches are much thinner and therefore ideal for jobs like hub servicing.Features:Includes all cone wrenches produced by Park Tool (13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 26mm and 28mm)"Y" design for durability and strengthPrecision sizing for use on even the narrowest of adjusting conesMilitary-grade industrial phosphate finishLong, vinyl dipped handle for leverage and comfortBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth 110 BCD Asymmetric 4-Bolt Chainring for Shimano Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from a cyclocross, gravel or road bike, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits 110 BCD Asymmetric 4-bolt cranks,Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700,Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. Click here to see Wolf Tooth's instructions for the modification.,Confirmed modification fit with Dura Ace 9100 Power Meter in size 42t or larger,Mounts in the big ring position of the cranks but is offset inward for perfect chainline.,The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.,Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains,Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Chainline 47.5mm.
Genuine Shimano replacement part Cuts hose cleanly at 90 degrees Sets both silver and gold inserts into hose (2.1 and 2.3 mm bore diameter) Can be hung on hook for wall storage
Wolf Tooth 104 BCD Stainless Steel ChainringReady for adventure, this solid component is compatible with 104 BCD crankset for a perfect fit. It features Wolf Tooth's patented Drop Stop technology which uses a narrow/wide tooth pattern to improve chainring life. This superb version's wide side of the tooth has maximum contact on the drive side which spreads the load while its narrow side allows for mud and debris clearance. Compatibility:These are functionally the same as the aluminium 104 BCD rings. These rings fit any 104 BCD crankset, and here are instructions on how to measure your BCD. Notes for those the plan to run a 32t chainring on a 2x Shimano crankset (XT, SLX, or Deore). 30t x 104 ring is the only Quarq power meter compatible 30t ring available.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Chainline: Chainline (approximate as BB centering and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2xChainring bolts are required for 1x 104 x 30t - use 10mm bolts 104 x 32t uses 6mm chainring bolts If mounting a 104 BCD bashring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets. Features: Material: Hardened and electropolished 416 Stainless Steel Use: MTB BCD: 104 Tooth Pattern: Wide/Narrow Weight: 30T: 72g; 32T: 88gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Pack Hanger Alignment Tool KitThis thru-axle kit is specifically designed to work on 12mm thru-axle and 5mm quick release bikes. Using this handy tool kit, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This tool is suitable for use on 12mm thru-axle and 5mm quick release bikes. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless Steel Use: MTBIncludes: Thru Axle and Quick Release KitCompatibility: Works on 12mm thru axle and 5mm quick release bikesMade in the USAWeight: 324gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Frame & Fork Alignment Gauge Set (FFG-2)The Park Tool Frame & Fork Alignment Gauge Set FFG-2 is the ultimate toolset to determine if your bike/fork dropouts are out of alignment. Badly aligned dropouts, which are usually caused by frame bending can cause bent axles and skewers, and can also cause tracking, shifting and steering issues. Grip and Leverage for Dropout Re-AlignmentThe FFG-2 quickly and accurately enables you to determine if your bike frame or fork needs re-aligned. If there is an alignment error, the long leverage handles and comfortable moulded grips provide plenty of grip and leverage for straightening and re-aligning the dropouts.Features: Material: Chrome-Plated Steel Compatible Hub Widths: From 100 to 160mmBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Pro Fork Mount Workstand from Lifeline securely mounts your bike and enables you to rotate it and work from multiple angles. Plus, its adjustable height and rotating platform give you easy access to all areas of the bike to make every maintenance task easier and more convenient.360-degree Rotating PlatformPlanted tripod design for stabilityMulti Axle compatibility with axle suppliedQR lockoutsStainless Steel tubingCollapses for easy storageFolded: 94 x 20 x 14cmAssembled: Platform length 87cm, Maximum height 119cm (floor to platform), Floorspace (leg to leg) 100cm, Leg length: 67cmWeight: 5.6kgThis workstand mounts to your bikes fork dropouts to hold your ride upright and stable. It features a multi-axle compatible adjustable sliding jaw-mount to ensure you have a secure mount that s easy to move as required. With a 360-degrees rotating platform, this workstand enables you to position your bike to whatever position makes your task the easiest. It features a rigid and stable tripod design that s equipped with balancing cup-feet to ensure your pride and joy stays upright. And, this robust stand conveniently folds down for easy storage when not in use.
These T-shaped, long-levered tools are ideal for accurately determining bike/fork dropout misalignment and straightening them back to their optimum fitting. Comfortable moulded grips make the job of realignment quick and easy, preventing potential shifting, tracking and steering problems and damage to axles and quick-release skewers. A fantastic tool for an essential piece of maintenance, the Frame & Fork Alignment Gauge Set FFG-2 will keep you on the straight and narrow.
Wolf Tooth Pack Hanger Thru Axle Alignment ToolThis thru-axle kit is specifically designed to work on 12mm thru-axle bikes. Using this handy thru-axle tool, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless SteelType: Thru Axle Kit - Works on 12mm thru axle bikesMade in the USAWeight: 297gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.