Search found 298 items

Hope Technology Stainless Road Bottom Bracket Cups - 68mm Blue
  • £94.50
  • RRP £105.00
  • Saving you £10

Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.

VIEW ITEM
Hope Technology Stainless Road Bottom Bracket Cups - 68mm Orange
  • £94.50
  • RRP £105.00
  • Saving you £10

Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.

VIEW ITEM
Hope Technology Stainless Road Bottom Bracket Cups - 68mm Purple
  • £94.50
  • RRP £105.00
  • Saving you £10

Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.

VIEW ITEM
Hope Technology Stainless Bottom Bracket Cups - 24mm Axle - 68/73mm Black
  • £94.50
  • RRP £105.00
  • Saving you £10

Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.

VIEW ITEM
Hope MTB Stainless Steel 24mm Bottom Bracket - Red - 68/73mm - English Thread}, Red
  • £95.00
  • RRP £105.00
  • Saving you £10

Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Wolf Tooth Stainless Steel Single Speed Cog
  • £96.00

The wolf tooth stainless steel single speed cog utilises extra tall teeth for reliable chain retention when using a chain tensioner. Fitting perfectly onto any shimano freehub, this cog is optimised for 9, 10 or 11-speed chains but will work with all chains.Machined in-house at wolf tooth's Minnesota hq from ultra-durable heated treated and electropolished 416 stainless steel, this is a remarkable exercise in top-tier precision engineering. If you're looking for a single speed cog to outlast all others, this is a sure bet.Compatibility:These will fit on any shimano-type freehub spline (geared or single speed),Designed to work with any chain,Tooth width optimized for 9-,10-, and 11-speed chains.

VIEW ITEM
Wolf Tooth Stainless Steel MTB Chain Ring (104 BCD) - Silver - 4-Bolt, Silver
  • £100.00
  • RRP £109.00
  • Saving you £8

Wolf Tooth 104 BCD Stainless Steel ChainringReady for adventure, this solid component is compatible with 104 BCD crankset for a perfect fit. It features Wolf Tooth's patented Drop Stop technology which uses a narrow/wide tooth pattern to improve chainring life. This superb version's wide side of the tooth has maximum contact on the drive side which spreads the load while its narrow side allows for mud and debris clearance. Compatibility:These are functionally the same as the aluminium 104 BCD rings. These rings fit any 104 BCD crankset, and here are instructions on how to measure your BCD. Notes for those the plan to run a 32t chainring on a 2x Shimano crankset (XT, SLX, or Deore). 30t x 104 ring is the only Quarq power meter compatible 30t ring available.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Chainline: Chainline (approximate as BB centering and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2xChainring bolts are required for 1x 104 x 30t - use 10mm bolts 104 x 32t uses 6mm chainring bolts If mounting a 104 BCD bashring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets. Features: Material: Hardened and electropolished 416 Stainless Steel Use: MTB BCD: 104 Tooth Pattern: Wide/Narrow Weight: 30T: 72g; 32T: 88gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Hope Technology Pressfit 41 - Stainless Bottom Bracket - 24mm Axle - Black
  • £103.00
  • RRP £115.00
  • Saving you £10

Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances. Fits BB92 / BB89.5 / BB86.5 & 100mm BB's for Fat Bikes.

VIEW ITEM
Hope Technology Pressfit 46 - Stainless Bottom Bracket - 30mm Axle - 100mm
  • £103.00
  • RRP £115.00
  • Saving you £10

Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.

VIEW ITEM
Hope Technology Pressfit 46 - Stainless Bottom Bracket - 24mm Axle - 68mm Thread - 24mm Axle - Black
  • £103.00
  • RRP £115.00
  • Saving you £10

Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.

VIEW ITEM
Hope Technology Pressfit 46 - Stainless Bottom Bracket - 24mm Axle - 73mm Thread - 24mm Axle - Black
  • £103.00
  • RRP £115.00
  • Saving you £10

Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.

VIEW ITEM
Hope Technology Pressfit 46 - Stainless Bottom Bracket - 30mm Axle - 73mm Thread - 30mm Axle - Black
  • £103.00
  • RRP £115.00
  • Saving you £10

Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.

VIEW ITEM
expand_less