These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again increasing life and reliability. Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 73mm and 83mm shell width's.
Complete top-of-the-range gear cable set designed to suit Dura-Ace 9000 gearsFitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one packIncludes 1.2 mm Polymer coated inner wires (1 x 2100 mm, 1 x 1800 mm), and SP41 outer casing for a complete bike (1 x 1700 mm), and all end capsPolymer coated stainless steel inner wire leaves a smooth surface for low friction and reduced sliding resistance giving a lighter quicker shifting operationOuter casing is lubricated internally along its length with low-friction silicone grease to reduce cable frictionSP 41 outer casing uses a special directional wound construction process makes for an axially stiff cable that transmits shifting movements accurately and quicklyOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Tortec class this rack as their ultimate touring rack and we can fully see why. The beautiful stainless steel tubing gives a classy look and will suit any touring bike perfectly. With an ultra-lite build and an increased max load capacity compared to the alloy version the stainless Epic rack really is the pick of the bunch. If the classy looks don't quite tip the scales then the 10 year manufacturers warranty should certainly push the Epic over the tipping point and onto your bike.Ultra-Lite Stainless Steel ConstructionThe Ultimate Touring PannierRear Light Mount Plate10 Year Manufacturers WarrantyFits 26" & 700C WheelsMax Load: 40kgCan Be Used With Disc Brake Equipped Bikes (Disc Mount Kit Available Separately)
When you're in the mood to share or just need to carry more, Carry Cap 64 oz keeps drinks hot and cold for hours with double wall vacuum insulation. Constructed in durable 18/8 stainless steel and finished in a sweat-proof powder coat finish. The grab-and-go Carry Cap twists to open and is compatible with Eddy®+, Chute® Mag, and Hot Cap vessels. Easy to clean and BPA, BPS, and BPF free.Key Features:Vacuum Insulated: Double wall vacuum insulated to maintain temperature.,Durable: 18/8 Stainless steel with powdercoat finish.,Stays Dry: Sweat-proof insulation.,Easy to Clean: Cap top rack dishwasher safe. Hand wash stainless steel vessel.,Drink Clean: BPA, BPS, and BPF free.,Universal Cap: Compatible with Eddy® , Chute® Mag, and Hot Cap vessels.,45 Hours Cold, 30 Hours Hot.
David Grant's signature BSD Raider Bar offers a higher rise than usual, inspired by David's hardcore style of riding. The Raider Bars are constructed from multi-butted, post weld heat-treated 4130 chromoly giving them maximum strength to weight ratio. Heavy knurling around the clamping area keeps the bars from slipping on impacts. Rise height: BSD's Raider Bar comes as standard with a massive 10" rise height. BSD's Raider Bars are also available in Oversized, click here to check them out. ###section### Product Specs Bar Type: 2pc Rise: 10" Width: 29.5" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 22.2mm Weight: 776g / 1.75lbs ###section### ###shogun-image-section###
The Giraffic bar has been in production for over six years now and Reed decided that he would like to make some changes to it, a little more upsweep for more comfort and a little taller on both sizes. The new Safari bar is constructed from heat-treated multiple butted 4130 chromoly, available in regular 7/8" and Oversize 1" Gorilla Grip versions. A classic two piece bar styling but still with the same Giraffic look. 9.1 and 9.6" rise versions available. ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 3 ° Backsweep: 13 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 1.7lbs ###section### ###shogun-image-section###
Oversize version David Grant signature Raider handlebars from BSD. The Raider bars feature a massive 10 rise and are made from multi-butted post weld heat treated 4130 for maximum strength to weight ratio. BSD OS Gorilla Grip system. The stem clamping area diameter is increased from 7/8 (22.2mm) to 1 (25.4mm). This increase in diameter gives 14% more clamping area than on regular 7/8 handlebars, so when youre nose diving down a 12 set your bars are less likely to slip. ###section### Product Specs Rise: 10" Width: 29.5" Up Sweep: 2 ° Backsweep: 11 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 1.75lbs ###section### ###shogun-image-section###
These custom, Swiss made bearings are double sealed, fully serviceable and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle without using shims or spacers -again increasing life and reliability. Hope use a non-contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. Standard 6 colours are available on cups - red, blue, silver, black, gold and gunmetal, with the centre tubes being black on the stainless and gunsmoke on the ceramic. Please Note: The 68/73mm width option is the universal type for both MTB and Road bikes, it is not the Hope Road Specific Series model. For the Road Specific model, choose the "Stainless Steel Road" option. Tech Tip: the 68/73mm width option is the most commonly used size for threaded road and mountain bike bottom bracket shells. The wider 83mm width is mainly seen on "downhill" (ie. long travel) mountain bikes. Please confirm the width of your bike frame's bottom bracket shell before ordering.
Message in a bottleKey Features:Two Stages Of Filtration. Hollow Fiber Filter Removes Bacteria, Parasites And Microplastics. Ion Exchange Filter Reduces Lead, Taste And Odor, Chlorine And Other Chemicals.,Flip, Bite, Sip. Drink Through Straw,Leak-Proof. Leak-Proof When Closed, Spill-Proof When Open,Easy To Carry. Comfortable Carry Handle,Easy To Clean. Filter Rinses Clean And Bottle Is Dishwasher Safe,Drink Clean. Bpa, Bps, And Bpf Free,Lifestraw® And Camelbak® Give Back One Product, One Child, One Year Of Safe Water.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.