With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-Tip If water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions 1: Put on your socks 2: Pull the shoe cover/overshoes on over your socks first 3: Ensure closure at bottom of the shoe cover is open 4: Put on your cycling shoes 5: Stretch the cover over your shoes and close snap underneath 6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad. Care Instructions Hand wash with cold water, air dry. Do not bleach. Do not iron. Store out of direct sunlight.
Part of the brand's renowned Factory Series, this mountain bike (MTB) rear shock is engineered for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails. Heavyweight Features in a Lightweight Package Designed specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. - Updated chassis and damper. - High-flow main piston. - Air seal package. - Volume spacers with smaller increments. - MCU bottom out bumper. - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. - Independent firm mode circuit – Clockable 2 position adjuster. - Increased rebound adjuster range (over DPX2). - Optimized reservoir lengths per shock size. - Hydraulic top out feature. - Reduced damper noise. - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. - Bearing hardware compatible both sides. - Air valve location offers improved frame fitment and pump access. Manufacturer's Part Numbers: 979-01-053 230 x 65mm Metric 979-01-054 185 x 52.5mm Trunnion 979-01-056 185 x 55mm Trunnion 979-01-058 205 x 60mm Trunnion 979-01-059 205 x 62.5mm Trunnion 979-01-041 190 x 45mm Metric 979-01-043 210 x 50mm Metric 979-01-045 210 x 52.5mm Metric 979-01-047 210 x 55mm Metric 979-01-049 230 x 57.5mm Metric 979-01-051 230 x 60mm Metric
Featuring a lightweight EVOL air spring, this mountain bike (MTB) rear shock offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-475 Black 7.875 x 2.0" 972-01-476 Black 7.875 x 2.25" 972-01-474 Black 7.5 x 2.0"
This mountain bike (MTB) rear shock features a lightweight EVOL air spring, which offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"
Designed in collaboration with the Black Cyclists Network (BCN), these shorts are built to last and ideal for a wide range of cycling, from commuting to long days out. Made from a combination of two high-quality Italian performance fabrics, they deliver a stretch, compressive fit and excellent mositure transfer. That moisture transfer is enhanced by mesh bib straps featuring carbon fibre to increase cooling. They offer plenty of support and no restriction of movement. Every element has been carefully considered, with an extremely durable wide silicone gripper keeping the shorts in place without being too restrictive. Elastic Interface® PARIS HP WOMEN chamois The benchmark for performance in the dhb range, three densities of foam deliver exceptional comfort while reducing unnecessary bulk. Maximised for extended periods on the hoods, this customised chamois will keep you riding all day. Black Cyclists Network The Black Cyclists Network (BCN) is a community created to connect black, Asian and minority ethnic (BAME) cyclists from across the world and address the lack of representation in cycling. dhb and BCN share the belief that cycling is for everyone. bluesign® APPROVED fabrics The bluesign® APPROVED mark indicates 90% of material, trims and accessories are sourced from fabric mills meeting the five bluesign® principles of air emissions, water emissions, resource productivity, consumer safety and occupational health and safety. These criteria ensure each mill’s production processes safeguard environment, their workers and consumers.
Designed in collaboration with the Black Cyclists Network and sharing it's construction with dhb’s Blok collection, this jersey is made from a super-soft, stretchy, lightweight fabric with natural wicking properties, ensuring you remain dry and comfortable all ride. It features a full-length zip and silicone gripper on the hem. A set-in sleeve gives the jersey a modern feel, while at the rear there are three standard drop-in pockets for all your ride fuel along with a fourth, zipped pocket which is ideal to stash your valuables. Reflective detailing on the reverse ensures you'll always be seen on the road. Black Cyclists Network The Black Cyclists Network is a community created to connect black, Asian and minority ethnic (BAME) cyclists from across the world and address the lack of representation in cycling. dhb and BCN share the belief cycling is for everyone.
Designed in collaboration with the Black Cyclists Network (BCN), these shorts are built to last and ideal for a wide range of cycling, from commuting to long days out. Made from a combination of two high-quality Italian performance fabrics, they deliver a stretch, compressive fit and excellent mositure transfer. That moisture transfer is enhanced by mesh bib straps featuring carbon fibre to increase cooling. They offer plenty of support and no restriction of movement. Every element has been carefully considered, with an extremely durable wide silicone gripper keeping the shorts in place without being too restrictive. Elastic Interface® PARIS HP MEN chamois The benchmark for performance in the dhb range, three densities of foam deliver exceptional comfort while reducing unnecessary bulk. Maximised for extended periods on the hoods, this customised chamois will keep you riding all day. Black Cyclists Network The Black Cyclists Network (BCN) is a community created to connect black, Asian and minority ethnic (BAME) cyclists from across the world and address the lack of representation in cycling. dhb and BCN share the belief that cycling is for everyone. bluesign® APPROVED fabrics The bluesign® APPROVED mark indicates 90% of material, trims and accessories are sourced from fabric mills meeting the five bluesign® principles of air emissions, water emissions, resource productivity, consumer safety and occupational health and safety. These criteria ensure each mill’s production processes safeguard environment, their workers and consumers.
Designed in collaboration with the Black Cyclists Network and sharing it's construction with dhb’s Moda collection, this jersey delivers in both style and performance, with high-quality Italian fabrics ensuring you ride in comfort every time. Super-soft to the touch, the fabric gently hugs the skin, while a feminine mesh enhances its luxurious feel. There are no sleeve grippers, instead the fabric naturally hugs your arms without pinching into the skin. And with three vertical pockets and a fourth zipper pocket, there's plenty of room for storage. This is not a race-fit jersey and you should consider sizing down if you prefer a more compressive style. Black Cyclists Network The Black Cyclists Network (BCN) is a community created to connect black, Asian and minority ethnic (BAME) cyclists from across the world and address the lack of representation in cycling. dhb and BCN share the belief that cycling is for everyone.
This trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders. Adjustable Coil Spring Rear Shock Benefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a high-quality coil spring ready design and an updated damper. The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate. Please note: A coil spring is not included with this model but is available to purchase separately. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off. Manufacturer's Part Numbers: 978-01-054 Black 8.5 x 2.5" 978-01-053 Black 7.875 x 2.0"
Built for speed, limitless freedom of movement and made to fit like a second skin, the superlight Aeron Lab Short Sleeve Tri Suit will ensure you're always performing at your best. Smooth and streamlined, there's no excess fabric to slow you down. When you're up to speed on the bike, the aero gains continue via the ergonomic design. With more aero-disruptive coverage on the upper-back seams, shoulders and aero fabric on the side of the legs, you'll be making rapid progress without wasting vital energy. Elastic Interface® TRIADA PERFORMANCE chamois In order to adapt to saddles that feature a hole in the centre, the unisex Triada Performance pad is dual-density, reinforced along the front sides for enhanced comfort over long-distance triathlons. Perforated foam inserts also deliver breathability and rapid drying. bluesign® APPROVED fabrics The bluesign® APPROVED mark indicates 90% of material, trims and accessories are sourced from fabric mills meeting the five bluesign® principles of air emissions, water emissions, resource productivity, consumer safety and occupational health and safety. These criteria ensure each mill's production processes safeguard environment, their workers and consumers. dhb's Aeron Lab collection Designed and developed for elite athletes. The most advanced fabric innovations and best-in-class construction techniques combine in exceptional performance apparel worthy of any race on the planet. A second-skin fit, body-mapped for optimal comfort and expertly tested. With Aeron Lab, there is no compromise.
Built for speed, limitless freedom of movement and made to fit like a second skin, the superlight Aeron Lab Women's Short Sleeve Tri Suit will ensure you're always performing at your best. Smooth and streamlined, there's no excess fabric to slow you down. When you're up to speed on the bike, the aero gains continue via the ergonomic design. With more aero-disruptive coverage on the upper-back seams, shoulders and aero fabric on the side of the legs, you'll be making rapid progress without wasting vital energy. Elastic Interface® TRIADA PERFORMANCE chamois In order to adapt to saddles that feature a hole in the centre, the unisex Triada Performance pad is dual-density, reinforced along the front sides for enhanced comfort over long-distance triathlons. Perforated foam inserts also deliver breathability and rapid drying. bluesign® APPROVED fabrics The bluesign® APPROVED mark indicates 90% of material, trims and accessories are sourced from fabric mills meeting the five bluesign® principles of air emissions, water emissions, resource productivity, consumer safety and occupational health and safety. These criteria ensure each mill's production processes safeguard environment, their workers and consumers. dhb's Aeron Lab collection Designed and developed for elite athletes. The most advanced fabric innovations and best-in-class construction techniques combine in exceptional performance apparel worthy of any race on the planet. A second-skin fit, body-mapped for optimal comfort and expertly tested. With Aeron Lab, there is no compromise.
As recently as the late 1980s, professional road cyclists would wear a pair of socks over their shoes while racing and training. Why did they do this? They would answer "It’s warmer, more aerodynamic, keeps my best shoes cleaner and looks better". Of course, one could argue that putting cotton socks over cycling shoes makes none of those possible. DeFeet crafted a solution that keeps windchill off the feet, creates smoother lines, keeps dirt out, looks better, and ultimately makes riders faster. Slipstream’s™ also last much longer than a pair of socks while barely costing more. And with the Reflective Stripe 4" Overshoes you'll be more noticeable on the road too. PLEASE NOTE - A small hole is required to be cut for your shoe cleat - NOT waterproof, these overshoes are designed to reduce windchill - Low temperature wash only - Not suitable for tumble dryer use - This item comes as a pair