You asked. We listened. eTap® is now available for Force®. SRAM Force eTap AXS™ offers the key features of RED eTap AXS™—modern gearing, advanced chain management, and easy personalization—in a more affordable package. Exploring new limits has never been easier. SRAM Force eTap AXS™—Simply Beyond.2X Groupset Contains:Centrelock Rotors Shift/Hyd Discbrake Levers Rear Derailleur & Battery, Front Derailleur & Battery2Piece Calipers160Rotors Clx Ti CenterlockingCharger/Cord & Quickstart Guide1X Groupset Contains:Centrelock Rotors Shift/Hyd Discbrake Levers Rear Derailleur & Battery2Piece Calipers160Rotors Clx Ti CenterlockingCharger/Cord & Quickstart GuidePlease Note: Chainset, Cassette and Chain are NOT supplied as a part of this groupset.
SRAM Force eTap AXS HRD 1x12sp Road GroupsetBringing you the latest developments in modern bike gearing technology at a slightly more affordable price point, the Force AXS HRD 1x12-speed components will transform your riding experience. Offering you a wider gear range with a smoother progression, plus enhanced with SRAM’s Etap shifting logic, this AXS drivetrain enables you to easily customise it from your smartphone, so you can change your preferences when out on a ride. There’s also SRAM’s Orbit technology on the rear derailleur keeping your chain in check, this system is ready to explore all the terrains that modern drop bar bikes can handle. Finishing things off are the powerful and reliable hydraulic disc brakes, which give you the fine speed control for attacking steep descents, even in wet weather.Features: Speed: 1x12-Speed Brake Caliper Mount: Flat mount Rear Derailleur Cassette Capacity:10-26T, 10-28T, and 10-33T SJ hoses connected (both brakes fully assembled and pre-bled) Included:1x Force eTap Shift/Hydraulic disc brake (right-hand rear) 1x Force eTap Hydraulic disc brake (left-hand front) Force eTap Rear derailleur and battery 2x160mm CLX Ti rotors Charger and cord Quick start guidePlease Note: This groupset does not come with a 12-Speed chainset, cassette or chain, these must be purchased separately.Technologies: Changing Shift Modes During A Ride: So you want to use an enhanced shift mode (Compensating or Sequential) and switch back to manual shifting mid-ride? You can do that in less than a second (seriously) without ever touching your smartphone No Worries Riding Rough Roads: eTap AXS rear derailleurs all come equipped with Orbit fluid dampers on the pulley cage for a quiet ride and outstanding chain security. Here's the secret to how you service it… do nothing. It never requires any maintenance Getting A Perfect Brake Lever Fit And Feel Is Easy: Hidden under the top of eTap AXS HRD brake hoods is a brake lever Contact Point Adjustment feature Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring Dual Pivot performance and a proprietary pad compound, the Force brake set delivers high power with low weight. Intelligent engineering combines cold-forged arms, titanium main pivot bolts and hardware and a powerful return spring for positive engagement and release. Their dual pivot design increases braking power and enhances progressive feel.
This race-ready 12 speed chainset features a carbon crankarm build, which means that riders will enjoy increased stiffness when climbing and an overall lower weight when accelerating on the flat. Its impressive strength to weight ratio is further enhanced thanks to its single X-SYNC aluminium chainring that provides exceptional durability and longevity as you tackle whatever the course throws at you. Coming equipped with X-SYNC technology, this model's chainring uses its wide/narrow tooth profile to deliver maximum chain control for an extra confidence boost on race day. One final highlight is its kitted out with a DUB compatible spindle interface for a simpler, stiffer, and more secure connection between your chainring, cranks and bottom bracket. SRAM originated the 1x drivetrain, and the SRAM Force 1 crankset evolves the innovation. It's lighter, stronger and simpler—non-aero chainrings can now be installed with a single tool. For cross, time trial (TT), triathalon and crits, this is the king of 1x. - Single-ring drivetrain simplifies functionality and reduces weight - 48t variant has direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC™ wide-tooth, narrow-tooth chainring technology provides maximum chain control - DUB™ bottom bracket adds durability and simplicity - Can be upgraded to a power meter Technologies: X-SYNC: SRAM X-SYNC 1x chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation. DUB: The relationship between bottom bracket spindle and bearing is the core of DUB technology. It’s where stiffness meets durability. SRAM took it a step beyond conventional thinking and made everything simpler—better integrating the relationship between chainring, crank, spindle and bottom bracket. It’s this approach to developing a complete system that equals better drivetrain performance. Bottom bracket sold separately. Manufacturer's Part Numbers: 00.6118.620.002 Black 46T 170mm 00.6118.620.003 Black 46T 172.5mm 00.6118.620.004 Black 46T 175mm 00.6118.620.008 Black 40T 170mm 00.6118.620.009 Black 40T 172.5mm 00.6118.620.010 Black 40T 175mm
The Force 1 crankset combines SRAM's Force 22 carbon arms and forged aluminum spider with our world-class 1 MTB technologies. Featuring X-SYNC™ technology, the Force 1 crankset is engineered for complete chain control. Features: Lightweight carbon arms with detachable spider X-SYNC™ chainring-an integral component of the SRAM 1x™ drivetrain X-SYNC™ tall, square tooth design provides maximum chain control Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain Mud and debris-clearing recesses for the inner chain links and rollers
The Force 1 crankset combines SRAM's Force 22 carbon arms and forged aluminum spider with our world-class 1 MTB technologies. Featuring X-SYNC™ technology, the Force 1 crankset is engineered for complete chain control. Features: Lightweight carbon arms with detachable spider X-SYNC™ chainring-an integral component of the SRAM 1x™ drivetrain X-SYNC™ tall, square tooth design provides maximum chain control Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain Mud and debris-clearing recesses for the inner chain links and rollers
Force22 Crank Set BB30 :The new Force 22 crankset delivers an upgrade in performance by utilizin gunidirectional carbon in the crank arm matched to a forged alloy spider.And, like RED, the hidden bolt pattern makes better use of carbon fiber to further improve stiffness and shed weight. The stunning X Glide R chainrings are optimized for use with the YAW Technology in the front derailleur, delivering seamless, flawless performance. It comes in fullsize and compact ratios and in multiple crank arm lengths..,Hidden bolt pattern leverages the characteristics of carbon fiber while presenting a sleek appearance.Stiffer X G lide R chainrings feature thicker construction, advanced shift timing pins and ramps, which are optimized for shifting with the Yaw Front Derailleur.New 165mm arm length option..,
The new Force 22 crankset delivers an upgrade in performance by utilizin gunidirectional carbon in the crank arm matched to a forged alloy spider.And, like RED, the hidden bolt pattern makes better use of carbon fiber to further improve stiffness and shed weight. The stunning X Glide R chainrings are optimized for use with the YAW Technology in the front derailleur, delivering seamless, flawless performance. It comes in fullsize and compact ratios and in multiple crank arm lengths..,Hidden bolt pattern leverages the characteristics of carbon fiber while presenting a sleek appearance.Stiffer X G lide R chainrings feature thicker construction, advanced shift timing pins and ramps, which are optimized for shifting with the Yaw Front Derailleur.New 165mm arm length option..,GXP Cups Not Included
The new SRAM Force 22 ErgoDynamic Shifters were modelled after the best in class comfort of SRAM RED, and represent our most advanced thinking yet on perfecting the interface between rider and bike.Everything received the same detail, including the transition between handlebar and hoods, the grip texture, finger wrap, and the separate interfaces with both the shifter and brake lever. The understated black finish makes it look fast and a perfect match for any machine.Set, 11-Speed Rear Yaw Front,Incredibly light weight at the bars, improving handling and control, at 307 grams,ErgoFit textured body improves grip and finger wrap with reduced diameter, giving better control, and a better transition to the bar,Individual Reach Adjust of brake and shift lever, now easier to access and uses a standard hex key, puts the controls exactly where you want them,Larger ErgoBlade lever improves shifting from the drops,DoubleTap technology delivers both shifts from the single lever,ZeroLoss shifting, shifts engage immediately,New clamp allows better fit and adjustment for modern carbon and ergo bars.
SRAM G2 R Disc Brake SetSpecifically engineered for the demands of mountain bike (MTB) trail riding, this hydraulic disc brake set features front and rear brake levers and calipers. The core of brake performance is consistency. Reliability. Trust. And with G2 R, SRAM focused on offering a premium value without compromising the heart of the operation. This brake set gives riders the G2s famed “Mini-Code” power and a whole suite of SRAM standard features at an unbeatable value.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. The brand obsessed over heat management, modulation, materials and design. It made the lever-reach and contact points adjustable to fit every hand and it tested the whole system to ensure it delivers confidence-inspiring performance and control on every ride.MTB Brake Levers with Reach AdjustBrake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.S4 Lightweight 4 Piston CaliperThe S4 caliper features four machined and moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds.Features: Lever Blade Material: Stamped Aluminium Finish: Anodised Use: Mountain Bike (MTB) Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Caliper Type: S4 four-piston caliper Recommended MMX Clamp (Not Included): Stl(glossblk)bolt,blk clp Reach Adjust: Yes, tool-free reach adjust Rotors Included: No, available separately Single or Pair: PairTechnologies: Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. DirectLink: A hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc Brake SetFeaturing a carbon fibre lever blade, this trail-ready mountain bike (MTB) hydraulic disc brake offers the perfect balance of stiffness, durability and low weight performance on your ride. SRAM has also kitted out this version with an anodised finish for additional protection against wear and corrosion, making it ideal for all-weather and trail conditions. Another highlight is its steel-backed organic brake pads, which ensure dependable braking as you weave your way from trail to trail. Coming complete with a wide range of technologies, this is a great choice of upgrade for smooth and reliable braking performance wherever your next trail adventure leads you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. The brand obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. The brand's engineers sculpted the finest materials - titanium and carbon fibre - to make this its lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance - its test riders didn't dub it the "Mini-Code" for nothing.- More caliper stiffness and a revised pad compound with bite.- Pivot bearings for crisp lever feel and a fatigue-free ride.- SRAM's best power to weight ratio in a four-piston brake.Features: Lever Blade Material: Carbon Caliper Body Material: Aluminium Finish: Anodised Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic Number of Pistons: 4 Caliper Mount Type: Direct mount DIR Recommended MMX Clamp (not included): Stainless bolt, blk clmp, Titanium bolt, blk clmp Rotor Compatibility: Front: 200mm; Rear: 180mm (rotors available separately) Single or Pair: Pair Weight: 238gTechnologies: Bleeding Edge: With this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Numbers: 00.5020.458.230 2X Black 1550mm 00.5020.457.210 2X Black 1450mmBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This trail-ready MTB hydraulic disc brake comes equipped with a high-quality carbon fibre lever blade for the perfect balance of stiffness, durability and low weight performance on your ride. SRAM has also kitted out this version with an anodised finish for additional protection against wear and corrosion, making it ideal for all-weather and trail conditions. Another highlight is its steel-backed organic brake pads, which ensure dependable braking as you weave your way from trail to trail. Coming complete with a wide range of technologies, this is a great choice of upgrade for smooth and reliable braking performance wherever your next trail adventure leads you. Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. The brand obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride. For the Ultimate, SRAM held nothing back. The brand's engineers sculpted the finest materials - titanium and carbon fibre - to make this its lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance - its test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a revised pad compound with bite. - Pivot bearings for crisp lever feel and a fatigue-free ride. - SRAM's best power to weight ratio in a four-piston brake. Technologies: Bleeding Edge: With this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Numbers: 00.5020.458.230 2X Black 1550mm 00.5020.457.210 2X Black 1450mm