Wera Tools Tool-Check Plus ToolsetThe Tool-Check Plus Toolset offers a superb collection of ratchet and screwdriver tools that are ideal for most screwing and wrenching tasks when tuning and repairing your bike. This toolset is also suited to working on road, mountain bike (MTB) and electric bikes (E-Bike).Combination tool consisting of a ratchet, bits, sockets and holder in a minimum of space. Ideal as a universal companion for a whole host of screwdriving applications. High quality bit holder with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Mini ratchet for rapid working when fastening jobs with a power tool or conventional hand tools are not feasible due to insufficient space. Rapid changeover from left to right direction and vice versa by using the switchover lever. Fast work possible by turning the thumbwheel (with the thumb) on the ratchet head. Simplest operation even with just one hand. Ergonomic ratchet head/lever: Kraftform geometry with perfectly shaped contact areas for the fingers. The direct bit take-up in the ratchet head makes for a mini tool design and is ideal for low working heights. The small return angle of 6q allows for precise work. Robust drop-forged, full steel design. Torque of over 65 Nm. The Rapidaptor bit holder with free-turning sleeve: can be used as an extension; for rapid bit change without any special tools, even the very smallest bits with just a single hand. Tough viscous bits for universal use. Sockets for both manual as well as power tool operations for almost all applications.Take it easy Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome plated.813 Bitholding screwdriverHigh quality bit holder. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with 1/4" hexagon head drive 889/4/1 K Rapidaptor Universal Bit Holder889/4/1 K Rapidaptor Universal Bit HolderRapidaptor universal holder for bits with 1/4" hexagon head drive. The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. The strong permanent magnet holds the bits absolutely securely. 1/4" hexagonal, suitable for power screwdrivers with take-up 8790 HMA Zyklop 1/4" socketManual and power tool socket insert by Wera allows applications both in manual as well as power tools. "Take it easy" Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome plated.851/1 TZ bitsHigh quality bits for Phillips screws. The Torsion design means that torque peaks can be absorbed. This prevents premature wear and enhances the service life. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 855/1 TH bitsHigh quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders. 867/1 TZ TORX bitsHigh quality bits with a Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 867/1 Z TORX BO bits with bore holeHigh quality bits for recessed TORX screws. The bore hole in the bit and the pin in the TORX BO screw prevent any unauthorised loosening - secure fastening. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 840/1 Z bitsTough viscous Wera bits for hexagon socket screws and universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4" hexagon, suitable for holders. 800/1 TZ bitsBits for slotted screws with Torsion zone to combat premature wear. Tough viscous for universal use; 1/4" hexagon, suitable for holders Features: A Bit Ratchet 1/4" 813 Bitholding screwdriver 889/4/1 K Rapidaptor Universal Bit Holder 870/1 Adaptor 8790 HMA Zyklop 1/4" socket 851/1 TZ bits 855/1 TH bits 867/1 TZ TORX bits 867/1 Z TORX BO bits with bore hole 840/1 Z bits 800/1 TZ bitsBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lightweight HollowTech II 105 11-speed chainset Innovative HollowTech forged and anodised aluminium crank arms utilise a hollow design that minimises flex and keeps the weight low The chainring teeth have been developed to work in conjunction with HG-X 11-speed chains for increased contact to provide greater efficiency and improved power transfer HollowTech II allows the bottom bracket bearings to be spaced wider apart, enabling the use of larger bearings and an increased axle diameter Can be used with Shimano external or press-fit bottom brackets The system allows for easier installation, adjustment, and maintenance Lightweight anodised SG-X aluminium chainrings for smooth and precise shifting
The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last.Key Features:Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load.,These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.,Size options: 2434T, 26/36T or 28/38T,104 BCD,Colour: Black,Built for: XC / Trail / AM.
2-piece design double-ring 9-speed chainset from the excellent value Sora rangeSG-X chainrings feature strategically placed chain pick-up pins and tooth profiles to ensure fast and positive shifting,2-piece design allows the bottom bracket bearings to be spaced wider apart (outboard the frame) or press fit 86.5mm enabling the use of larger bearings and an increased axle diameter,There is also the benefit of easier installation, adjustment and maintenance,Compatible with Hyperglide (HG) chains,Aluminium crank arms,Aluminium outer chainring with hard-wearing steel inner chainring,Compatible with 9-speed drivetrains.
Ride anywhere with the wide-range PG-1230, 11 to 50-tooth Eagle™ cassette. The NX cassette gives riders every bit of the climbing range that the Eagle™ ecosystem affords with a simple upgrade to splined-drive body wheels. The PG-1230 is the only Eagle™ cassette designed to be durable enough to withstand the increased demands of E-MTB applications and a perfect solution to heavy-duty use and abuse.Things To Remember:Eagle™ technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents.,Eagle™ is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle™ drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact.,The PG-1230 is the only Eagle™ cassette that meets our durability requirements for E-MTB applications.Key Features:,Compatible with a splined driver body.,This PG-1230 cassette is an integral part of the SRAM Eagle™ drivetrain Ecosystem.,Wide 11-50t gear range—a perfect fit for any ride. Optimized gear steps across entire range.Specifications:Speed (CS): 12sGearing: 11-50tCog finish (Cassette): BlackTechnology (Cassette): PGCog sizes: 11-50t:11,13,15,17,19,22,25,28,32,36,42,50,
Ravemen Lighting. Ravemen is derived from their passion for bike riding and concern for bike riders as well as others’ safety. Coming from different areas of the bicycle industry and being biking enthusiasts, engaging in night riding is quite normal for us. To our regret, most of the high-output bike lights on the market have no anti-glare capability, which is dangerous to oncoming traffic, and as a result places them at great risk.In fact, many people have had the experience of being dazzled by high lumen bike lights, and Ravemen believe that every rider also tries not to disturb others while enjoying the fun of riding. Based on such perception and being inspired by automotive headlights, the idea of applying a similar design to bike lights came into their minds. Through the entire process of conceiving, designing, proofing, testing and adjusting, they finally made it! That means the world’s first bike light with a simulation of the design of automotive headlights is available.Combining high quality and durable material with innovative design, along with the concern for riders and others’ safety which has been fused into their genes, Ravemen promise their products will be not only reliable and easy-to-use to improve your riding experience, but also a trusted companion that will earn you respect from others.CR1000 FrontWith a 4000mAh large battery and max 1000 lumens, CR1000 is designed for road riders that ride at night at fast speed and long distance. Featuring RAVEMEN new anti-glare optical lens, CR1000 creates a T-shaped beam, illuminating the road with flood light for close-range distance and bright spotlight for long distance visibility whilst not dazzling other road users. With batter run extension times, the CR1000 could also be used for long distance riding and racing. Key Features: Anti Glare: T shaped lens is the second generation anti-glare lens from Ravemen, T-shaped beam with anti-glare cut-off line creates no dazzle for other road uses, Outdoor beam shot allows the rider to see better and further, Dual side lights increase side visibility and riding safety at crossroads, Extend the runtime of the battery by connecting with an external power source, Wired remote button included increasing levels of safety and convenience to switch between modes, High capacity 4000mAh battery boosts the runtime for long distance riding, IPX6 water resistance and durable anodized aluminium body, Quick release design for easy slide-in/slide-out, Intelligent circuit remembers the last used brightness for when the light is turned on again, Micro USB charging port, compatible with most phone charges, Compatible with handlebars from 22.22mm to 35mm, LED: 1*CREE XM-L2 with lifespan of 50000 hours, 104mm x 29mm x 32mm, Weight: 140g,. CL05 Rear EYE-CATCHING WARNING FLASH WITH LIGHT SENSORCL05 is a lightweight and easy-to-use rear light. Featuring two COB LED rings and built-in light sensor, it provides a maximum of 30 LED lumens on warning flashing mode, great for busy night street commuting or city riding. With the flexible rubber strap mount and mounting clip, the light could be mounted to round and aero seatpost or clipped to some compatible saddle bags or backpacks directly. Key Features: LED: COB LED,Battery: 200mAh/3.7V rechargeable Li-polymer battery,Dimensions (Light Unit): 42.5mm (L) x 23.5mm (W) x 43.5mm (H),Weight (Light Unit): 23g,Mount Size: Compatible with 24-36mm round seatpost and aero seatpost,Design and specifications are subject to change without notice,. How to use the light sensor?The light sensor inside the CL05 / CL06 is different from other sensors in the market. It's doesn't increase the brightness when it starts to get dark, it's used at night for detecting approaching vehicles in from behind. When the Ravemen light sensor detects approaching vehicles, it will produce a warning flash so the rider can be seen more clearly.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
PH-T1.2 P-Handled Torx® Compatible Driver Set with Holder-Shaped Wrench Set.Set Includes:T6,T8,T10,T15,T20,T25,T30,T40.
Tool specialist Wera presents Bicycle Set 3, a compact but comprehensive 39-piece screwdriver & socket toolset for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for Road, MTB and E-Bikes.Wera’s iconic ergonomic Kraftform bit hand holder for fatigue-free workingThe Zyklop Mini 1 bit ratchet slim design and fine-tooth mechanism of the ratchet, with its small return angle of only 6 degreesThey feature a ball stop groove and knurling at the rear end for manageability during manual useFeature Wera’s Take it Easy Tool Finder colour coding, for easy and fast location of the tool you need for the jobAll Wera tools are covered by a lifetime guaranteeThe set includes Wera’s iconic ergonomic Kraftform bit hand holder for fatigue-free working. Plus, the Rapidaptor quick-release chuck, for fast bit change without the need for additional tools. The tough-absorbing bits prevent any premature breakage of the drive tip.The Zyklop Mini 1 bit ratchet slim design and fine-tooth mechanism of the ratchet, with its small return angle of only 6 degrees, makes it ideal for reaching confined spaces on your bike. The Zyklop sockets are suitable for manual and machine-operated tools (non-impact). They feature a ball stop groove and knurling at the rear end for manageability during manual use.These tools feature Wera’s Take it Easy Tool Finder colour coding, for easy and fast location of the tool you need for the job. Additionally these tools feature Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle.Set Includes:1 x Kraftform bit hand holder with Rapidaptor quick release chuck,1 x Zyklop Ratchet,1 x K Rapidaptor Universal bit holder,1 x Nut spinner socket adaptor,7 x HMA Zyklop 1/4" Socket (5.5mm, 6mm, 7mm, 8mm, 10mm, 13mm, 15mm),3 x TZ Philips Head Bits (PH 1, PH 2, PH 3),7 x TZ TORX Bits (TX10, TX15, TX20, TX25, TX27, TX30, TX40),3 x TZ Flat Head Screwdriver Bits (4mm, 4.5mm, 5.5mm),7 x Hex-Plus 89mm long Bits (2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm),5 x Hexagon Ball Head Bit (2.5mm, 3mm, 4mm, 5mm, 6mm),2 x Tyre Lever,1 x Robust & lightweight fabric pouch.Technical Specification:Size: 210mm x 110mm x 65mm,Set Weight: 678g.
Ravemen CR1000/CL05 USB Rechargeable Light SetThe CR1000/CL05 USB Rechargeable Light Set from Ravemen combines two powerful and versatile cycle lights that are ideal for general road cycling, daily commuting and long-distance touring. The front light has a max output of 1000-lumens to vibrantly illuminate the road ahead of you while the rear shines bright and features a light sensor that pushes its power output to maximum when other vehicles headlights shine upon it.Ravemen CR1000 USB Rechargeable Front LightThe CR1000 USB Rechargeable Front Light from Ravemen is a powerful, versatile and water-resistant cycle light that's ideal for road racing, touring and urban errands. It offers a max output of 1000-lumens to illuminate the road ahead in the darkest and worst weather conditions while also providing a max run-time of 25-hours on Eco and 45-hours on Rapid Flash mode.Powerful Long-Life Battery and 1000-Lumens OutputWith a 4000mAh large battery and max 1000 lumens, CR1000 is designed for road riders that ride at night at fast speeds and over long distances. Featuring Ravemen's new anti-glare optical lens, CR1000 creates a T-shaped beam, illuminating the road with a floodlight for close-range distance and a bright spotlight for long-distance visibility whilst not dazzling other road users. With batter run extension times, the CR1000 could also be used for long-distance riding and racing. Anti Glare Lens The T shaped lens is the second-generation anti-glare lens from Ravemen and it provides a T-shaped beam with an anti-glare cut-off line that creates no dazzle for other road users. Wired Remote Control A wired button allows you to change the level of brightness without releasing your grip. Conveniently, a long press on the wired button will activate maximum output for emergency needs. Battery Runtime Extension Extend the runtime of the battery by connecting an external power source for emergency lighting when the light is on low power. Micro USB Charging Port This light features a Micro USB charging port that's compatible with most phone chargers for fast and convenient charging. Intelligent Memory Circuit and Display An intelligent memory circuit remembers the last used brightness level and mode when turned on again. And it features battery level, charging indicators and auto power save mode when it has low battery. Durable and Waterproof Anodised Aluminium Body Quick-release design for easy slide-in/out and is compatible with handlebars of 22.2mm - 35mm. Plus, it features an IPX6 water-resistant anodised aluminium body for durability in all riding conditions. Run Time:Low Beam: High: 1000-lumens; 2 hours run time Mid: 600-lumens; 2.7 hours run time Low: 350-lumens; 5.8 hours run time Eco: 100-lumens; 25 hours run time Pulse Flashing: 500-lumens; 43.5 hours run time Rapid Flashing: 150-lumens; 45 hours run timeEmergency: High: 1000-lumensFeatures: High capacity 4000mAh battery boosts the runtime for long distance riding IPX6 water resistance and durable anodized aluminium body Quick release design for easy slide-in/slide-out Intelligent circuit remembers the last used brightness for when the light is turned on again Micro USB charging port, compatible with most phone charges Compatible with handlebars from 22.22mm to 35mm LED: 1*CREE XM-L2 with lifespan of 50000 hours Dimensions: 104mm x 29mm x 32mm Weight: 140gRavemen CL05 USB Rechargeable Sensor Rear LightThe CL05 USB Rechargeable Sensor Rear Light from Ravemen is a lightweight and compact rear cycle light that can be mounted on your bike or clipped to your clothing or backpack. It provides 30-lumens illumination with multiple light modes to suit a wide variation of low-light and weather conditions. With High, Low and four different flashing modes, it's ideal for inner-city errands, urban commuting and evening rides. Plus, it has an integrated sensor that causes the light to shine at full power when headlights from another vehicle shine your way from behind - this makes sure you are more visible to other road users. 30-Lumen Rear Cycle Light for Inner-City CommutingThe Ravemen CL05 is a lightweight and easy-to-use rear light. Featuring two COB LED rings and a built-in light sensor, it provides a maximum of 30 LED lumens on warning flashing mode, great for busy night street commuting or city riding. With the flexible rubber strap mount and mounting clip, the light could be mounted to round and aero seatpost or clipped to some compatible saddlebags or backpacks directly. Small, Bright and Reliable Rear Cycle LightThis light has a highly efficient COB LED with a max output of 30-lumens. A built-in light sensor that activates the lights max output when detecting headlights from rear approaching vehicles offers a warning to other road users that you are cycling ahead of them. Plus, it has auto power save and an indicator for low battery power, a quick-release design for versatile mounting and a USB-C charging port for convenient charging. And it has a built-in mode memory function to remember your settings and it's IPX6 water-resistant. Run Time: High: 4.5 hours Low: 12 hours Rapid Flashing: 8 hours Pulse Flashing: 18 hours High Slow Flashing: 17 hours Low Slow Flashing: 22 hours Warning Flashing: /Features: LED: COB LED Battery: 200mAh/3.7V rechargeable Li-polymer battery Dimensions (Light Unit): 42.5mm (L) x 23.5mm (W) x 43.5mm (H) Weight (Light Unit): 23g Mount Size: Compatible with 24-36mm round seatpost and aero seatpostBuy Ravemen Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 3 Screwdriver SetThe ideal screwdriver set for most workshop bike jobs and is a superb addition to any toolbox, the Bicycle Set 3 Screwdriver Set from Wera Tools features a high-quality Kraftform bit hand holder and Zyklop Ratchet with 39-bits for many different fittings to suit a wide range of tooling requirements.Tool specialist Wera presents Bicycle Set 3, a compact but comprehensive 39-piece screwdriver and socket toolset for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for Road, MTB and E-Bikes. The set includes Wera's iconic ergonomic Kraftform bit hand holder for fatigue-free working. Plus, the Rapidaptor quick-release chuck, for fast bit change without the need for additional tools. The tough-absorbing bits prevent any premature breakage of the drive tip. The Zyklop Mini 1 bit ratchet slim design and fine-tooth mechanism of the ratchet, with its small return angle of only 6 degrees, makes it ideal reaching confined spaces on your bike. The Zyklop sockets are suitable for manual and machine-operated tools (non-impact). They feature a ball stop groove and knurling at the rear end for manageability during manual use. These tools feature Wera's Take it Easy Tool Finder colour coding, for easy and fast location of the tool you need for the job. Additionally, these tools feature Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle.Features: 1 x Kraftform bit hand holder with Rapidaptor quick release chuck 1 x Zyklop Ratchet 1 x K Rapidaptor Universal bit holder 1 x Nut spinner socket adaptor 7 x HMA Zyklop 1/4" Socket (5.5mm, 6mm, 7mm, 8mm, 10mm, 13mm, 15mm) 3 x TZ Philips Head Bits (PH 1, PH 2, PH 3) 7 x TZ TORX Bits (TX10, TX15, TX20, TX25, TX27, TX30, TX40) 3 x TZ Flat Head Screwdriver Bits (4mm, 4.5mm, 5.5mm) 7 x Hex-Plus 89mm long Bits (2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm) 5 x Hexagon Ball Head Bit (2.5mm, 3mm, 4mm, 5mm, 6mm) 2 x Tyre Lever 1 x Robust and lightweight fabric pouch Size: 210mm x 110mm x 65mm Set Weight: 678gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fulcrum Racing 900 C17 Road WheelsetThis wheelset is engineered for road bike racing as it delivers incredibly smooth rolling resistance and comfort on the roughest of rides. It features a robust aluminium rim construction, which makes it ideal at handling all the intensity that comes with long and intense rides. Fulcrum has also kitted out this version with aluminium hubs and steel axles, which gives it another layer of robustness as you maintain your momentum. One final highlight is it weighs in at 1890g, which allows you to benefit from its exceptional strength without adding any excess weight to your ride.Features: Rim Material: Aluminium Alloy, sleeved joint Spokes Material: Steel Ed black and brass nipples Hubs: Aluminium body and Steel axles Use: Road Profile: H24mm - ETRTO 17C Number of Spokes: Front: 20; Rear: 24 Profile: Rounded, sez. 2.0mm Hubs: HR05 Type: J-type Bearings: Standard tech. (Industrial) Weight: 1890g (approx)Buy Fulcrum Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.