Sector 9i Carbon Front Mountain Bike RimReady for shredding the trails with your friends as well as exploring new off-road routes on your own, this carbon MTB rim is engineered for maximum performance. It features a hard-wearing unidirectional carbon fibre rim construction, which allows you to benefit from its fantastic strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating TeXtreme Innegra into the layup of the rims. This gives it 75% more impact resistance than standard carbon rims of the same profile. The 9i MTB rim is significantly more resistant to wear and tear and less prone to catastrophic failure.So what is Innegra?Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping and energy dissipation. The TexTreme fabric used in the layup of 9i rim is a Spread Tow fabric built from a hybrid of Innegra and T700 carbon fibres.The Spread Tow layout is significant because it also contributes some positive attributes - the fibres are straighter (reduced crimp therefore higher strength) and it facilitates the use of less resin (lower weight). In the 9i rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern.Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the 9i rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the 9i rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue and to improve traction. Such an improvement in vertical compliance also brings a radically improved ride quality to the 9i wheelset.The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the 9i rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The 9i rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements.In real world terms, the 9i rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength and compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped 9i rim weighs just 428g (29”).Features: Rim Material: T-700 Unidirectional Carbon Fibre; Outer layer: TeXtreme Plain Weave Spread Tow Carbon Fibre and Innegra S Hybrid Use: MTB Rim Size: 29" Holes: 28h or 32h options Rim Width: (Internal) 29mm; (External) 35mm Rim Depth: 25mm ERD: 591mm Tubeless: Yes Single or Pair: Single Weight: 428gBuy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Ultegra R8170 C60 Carbon CL Front Disc WheelThe Ultegra R8170 C60 Carbon CL Disc Wheel from Shimano features a 60mm-deep full-carbon rim that's ideal for high-speed and flatter race events. Suited to time trial and triathlon races, this wheel is tubeless ready for fast rolling speeds, low rolling inertia and exceptional grip in all conditions. And it's compatible with Shimano 11 and 12-Speed gear systems and it features a centre lock rotor mount for use with disc brakes.Designed for the highest speed environments and modern tyre widths, the Ultegra C60 front wheel shares its all-carbon rim profile with Dura-Ace but employs a hub that is compatible with both 11 and 12-speed cassettes.For situations where aerodynamics is the priority, the new Ultegra R8170 C60 front wheel features an all-carbon, 21 mm internal, tubeless compatible rim and a super-fast cup and cone bearing hub that is compatible with both 11 and 12-speed cassettes.Centre-Lock Disc Rotor MountThe Centre Lock system makes an easy rotor installation possible with a spline mount and a lock ring. The lock ring mounting system reduces the total working hours by shortening the amount of time of both installation and de-installation. In addition, the secure fixing by the spline mount enhances precision and rigidity while improving braking efficiency.D2 Aerodynamic Rim ProfileAerodynamic performance is affected by wind direction. To create the D2 rim, Shimano engineers considered both frontal and crosswinds, aiming to achieve optimal performance in real-world riding conditions. Extensive prototype testing, in the wind tunnel and on the road, proved that a wide rim shape with a deep tyre bed performs best across a wide range of conditions. At yaw angles ranging from 0 to 15 degrees, the Shimano D2 rim profile reduces air drag better than others aero shape rims. This rim design also boosts lateral wheel stiffness and offers improved vertical compliance for increased control, comfort and durability on the road.Shimano E-Thru Axle SystemThe tool-less type thru-axle skewer system optimizes rigidity and weight balance and enables easy operation with a reliable internal cam mechanism. The 15 mm thru-axle system is 15% stiffer torsionally and 25% stiffer in transverse shear than a traditional 9 mm quick release front axle system. High rigidity is secured while keeping the optimum weight balance. The E-Thru axle hub system minimizes the distortion of suspension while maintaining lightweight for riding around sharp corners at high speed.Features: Series: Ultegra R8100 Series Rim: Carbon Tubeless Ready Type: Clincher 60mm height full Carbon rim Internal Rim Width: 21mm Shared rim profile with R9200 Dura-Ace wheels Improved aerodynamics Axle: 12mm E-THRU Disc Rotor Mount: Centre Lock Weight: 738gA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank SPANK 350 Vibrocore Front WheelThis MTB front wheel features a tough alloy construction, which makes it more than capable of withstanding all the abuse that's associated with all-day epics in the mountains. Spank has also kitted out this trail-ready front wheel with tubeless tyre compatibility. This means that you'll benefit from its superior traction and control, without having to worry about adding any unnecessary weight. - High-performance front wheel with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness.- Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. Features: Material: Alloy Use: MTB ERD (mm++) / ETRTO (mm): 27.5": 564/584x30.5mm; 29": 601/622x30.5mm Rim Dimensions: Inner: 30.5mm; Outer: 35mm Spokes: J-Hook, tripple butted 2.2/1.8/2.0, brass external nipples, 32H Tubeless Compatible: Yes Valve: F/V Presta Axle: 15x110mm BOOST Technologies: Vibrocore, Radial Compliance, Torsional Strength, Lateral Stiffness, BeadBite Anti-burp, OohBah Inverted Inner WallBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front wheelInner rim width - 31.5,Spoke count - 28,Spokes - Sapim D-Light,Weight - 837g 27.5 / 865 29.
Fast Forward F9T Track Front WheelFast, agile and ultra-stable, the Fast Forward F9T Front Wheel is a track optimised wheel that features a 90mm-deep rim profile, uses tubular tyres and since it's intended for track use it has no braking surface. The combination of its full carbon rim, 90mm DARC-profile rim, tubular tyre compatibility and zero-braking surface provides this wheel with exceptional aerodynamic efficiency and control at a low weight. Hand built in The Netherlands, this artisan-built wheel is exceptionally stiff and responsive, giving the outstanding performance required for velodrome and track racing. World Class Quality Full Carbon Track Wheels Since no brake surface is required for track, the F9T UV protected decals are applied to the rim edge 24 front and 28 rear spokes on FFWD proven track hubs. Fast Forward's rim technologies and unique artisan wheel building techniques are market leading and World Tour tested. FFWD Wheels are hand built in The Netherlands and have been ridden to victories in the Spring Classics, each Grand Tour and numerous World Championships. Features: 90mm Full Carbon Tubular Track Specific, no braking surface UV Protected Decals Use: Track Spoke Count: 28H Spokes: DT Aerolite and brass nipples Hub: FFWD Track Rim Profile: FFWD DARC Rim Depth: 90mm Rim Material: Superstiff High Tensile TC35 Carbon Rim External Width: 22.4mm Recommended Tyre Widths: Minimum: 21mm; Maximum: 33mm Max Weight: 120kg Track lockring included Hand built in Holland Weight: 1.97gBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Meet your best riding companion for drop-bar adventures. Be it a gravel grinder road ramble bikepacking trip or fast daily commute this new addition to our Allroad family is faster smoother and 140g lighter than its predecessor the Allroad Elite.The Allroad SL’s lightweight aluminum rims feature ISM4D technology which strategically removes material from the rim where it’s not needed but keeps it around the spokes where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Wide rims (22mm internal) are compatible with tubeless tires ranging from 28mm to 64mm for a smooth efficient ride quality.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed so no tape is required. No hassles no added weight (another 30g saved).Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer and the Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) provides fast engagement stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release. Key benefits Ride smoother and faster on rough roads gravel and dirt 22mm wide UST rims integrated for a smooth ride with a wide range of tubeless tires from 28mm-64mm UST Road Tubeless lets you run lower tire pressure for comfort and control on rough roads No tubes means less friction better efficiency and grip and pinch-flat protection Superlight and durable ISM4D rim weighs only 440g Patented lightweight aero spokes Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling doesn't require the use of rim tape - 30g saved per wheel Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer 17mm axle and new hub design ID360 freewheel technology is 12mm compatible convertible to quick release (15mm axle option through axle replacement) Rims Material: Maxtal Tire: UST Tubeless and tubetype Disc brake specific profile SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Internal width: 22 mm Hookless profile ETRTO size: 622x22TSS Height: 22 mm Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull elliptical aero double butted (patented) Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 46bar/67PSI with a 28mm tyre - 327bar/39PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Infinity hubs Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 15mm axle (LVXXXXXX) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Riders seeking a strong durable and lightweight wheelset for rugged road and gravel adventures will find this 650B/27.5 diameter wheel with wider rims a perfect choice. It makes no compromises on responsiveness durability and ease of use.The lightweight aluminum rims feature ISM4D technology which strategically removes material from the rim where it’s not needed but keeps it around the spokes where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Super-wide rims (25mm internal) are compatible with tubeless tires up to 64mm to absorb road shocks and vibrations. You get 5cm of “tire travel” to cushion your ride and the smaller-diameter rims allow you to retain the agile handling you want with a drop-bar bike.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed so no tape is required. No hassles no added weight. Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer and the Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) provides fast engagement stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release. Key benefits Traction rolling efficiency and confidence on all types of terrain Wider 650B/27.5 rims let you run larger high-volume tires and still maintain the responsive handling of a normal road bike 5cm of plush “tire travel” improves traction and comfort prevents pinch flats and lets you dial in the perfect tire pressure for the terrain UST Tubeless compatibility for lower rolling resistance Superlight and durable ISM4D rim is only 440g Patented lightweight aero spokes Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling doesn't require the use of rim tape - 30g saved per wheel Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer 17mm axle and new hub design ID360 freewheel technology is 12mm compatible convertible to quick release (15mm axle option through axle replacement) Rims Material: Maxtal Tire: UST Tubeless and tubetype Disc brake specific profile SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Internal width: 25 mm Hookless profile Height: 22 mm ETRTO size : 584x25TSS Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull elliptical aero double butted (patented) Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Infinity hubs Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 15mm axle (LVXXXXXX) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall to significantly reduce the risk of tire cuts and punctures. The 30mm wide rims allow you to run lower tire pressure for better traction and smooth rolling efficiency. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape making it the easiest system for mounting and changing tubeless tiresISM rim machining removes material from the rims in strategic areas to minimize weight without compromising strength and our new Black Shield treatment protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts these 29” wheels are available for Shimano HG9 XD and Micro Spline freewheel bodies and come with UST tubeless valves spare spokes and accessories. Key benefits Reduced risk of flats on rugged trails PFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain. Purpose-built for off-road E-bikes Wider 30mm (internal) rim adds stiffness and cornering precision. Engineered for the added torque of E-bike motors with 28 threaded three-cross spokes that further boost lateral stiffness. Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim. Rims Material: Maxtal Weight reduction: ISM Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Internal width: 30 mm E-Bike specific rim profile Black Shield treatment (protects your rim against impacts and scratches) ETRTO size 29: 622x30TC Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Spokes Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Count: 28 front and rear Lacing: front and rear crossed 3 contactless Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 295bar/43PSI with a 52mm tyre - 155bar/22PSI with a 125mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : Torque Caps for Center Lock hub (V2374401) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Boost 20mm : 20x110 boost front hub cap (V2680401 - Not Delivered with the wheel only compatible with INT6bolts hub) 15mm front hub cap for Center Lock hub only (V2372501 - Delivered with the wheel) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall which significantly reduces the risk of tire cuts and punctures. The wider 35mm rims allow you to run lower tire pressure for better traction and the rims pair perfectly with trail tires ranging from 2.6 to 3.2-inch. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape making it the easiest system for mounting and changing tubeless tires.ISM machining removes material from the rims in strategic areas to minimize weight without compromising strength and our new Black Shield finish protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts these 27.5” wheels are available for Shimano HG9 XD and Micro Spline freewheel bodies and come with UST tubeless valves spare spokes and accessories. Key benefits Reduced risk of flats stronger rim profile PFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain. Increased traction stability and control Wider 35mm (internal) rim is optimized for lower tire pressure to maximize your grip efficiency and comfort on the trail. Rim profile is optimized for modern trail tires from 2.6 to 3.2'. Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim. Rims Material: Maxtal Weight reduction: ISM Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Internal width: 35 mm E-Bike specific rim profile ETRTO size 275: 584x35TC Black Shield treatment (protects your rim against impacts and scratches) Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Spokes Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Count: 28 front and rear Lacing: front and rear crossed 3 contactless Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 255bar/37PSI with a 54mm tyre - 13bar/19PSI with a 125mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : Torque Caps for Center Lock hub (V2374401) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Boost 20mm : 20x110 boost front hub cap (V2680401 - Not Delivered with the wheel only compatible with INT6bolts hub) 15mm front hub cap for Center Lock hub only (V2372501 - Delivered with the wheel) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Cross-country racing puts a multitude of demands on a wheelset. You want one that helps you climb with speed and efficiency descend with greater control and track through the rough stuff with smooth confidence. The Crossmax SL S is a lightweight alloy wheel that does it all.Engineered with a specific rim profile that combines a 25mm internal width and our patented ISM4D technology this wheelset can boost the performance of your bike with a price that’s accessible compared to carbon wheel options. The ISM4D process machines the rim in the areas with less stress to reduce weight without compromising strength. The rim also features our Black Shield technology which protects against scratches and dents so you can charge hard through rock gardens and rough singletrack.The rims are made with our patented Fore technology with a fully sealed upper rim bridge that eliminates the need for rim tape. This saves 30 grams per wheel not to mention the hassles associated with tape when setting up tubeless tires. New Infinity hub is lighter and feature a new spoke lacing which increases stiffness for better power transfer and the Instant Drive 360 freewheel with a double ratchet provides fast engagement. The rear hub is compatible with Shimano HG9 Micro Spline and SRAM XD driver bodies. The Crossmax SL S is available with 6-bolt or center lock brake rotors in 29” only. It’s compatible with a 15x110 front axle and 12x148 rear and comes with valves replacement spokes and accessories. Key benefits Best in its class alloy XC wheelset ISM4D rim machining reduces weight to close the gap to carbon rims without compromising strength. Lighter weight rims result in super low inertia and instant acceleration. Increased traction and durability 25mm wide hookless rim profile optimized for lower tire pressures resulting in improved grip in all conditions. Optimized for modern XC tubeless tires from 2.1 to 2.30'. Black Shield treatment protects rims against impacts and scratches. Most user-friendly tubeless system Fore technology fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and durability of the rim. Rims Material: Maxtal Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Weight reduction: ISM 4D ETRTO size 29: 622x25TSS Internal width: 25 mm Hookless profile Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Hubs Instant Drive 360 freewheel technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Infinity hubs Intended use Recommended tire sizes: 52mm to 76mm (20 to 30) ASTM CATEGORY 3 : CROSS COUNTRY For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) 15mm front hub cap (V2372501 - Delivered with the wheel) Boost : Torque Caps for Center Lock hub (V2374401) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Compatibility Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Cross-country racing puts a multitude of demands on a wheelset. You want one that helps you climb with speed and efficiency descend with greater control and track through the rough stuff with smooth confidence. The Crossmax SL S is a lightweight alloy wheel that does it all.Engineered with a specific rim profile that combines a 25mm internal width and our patented ISM4D technology this wheelset can boost the performance of your bike with a price that’s accessible compared to carbon wheel options. The ISM4D process machines the rim in the areas with less stress to reduce weight without compromising strength. The rim also features our Black Shield technology which protects against scratches and dents so you can charge hard through rock gardens and rough singletrack.The rims are made with our patented Fore technology with a fully sealed upper rim bridge that eliminates the need for rim tape. This saves 30 grams per wheel not to mention the hassles associated with tape when setting up tubeless tires. New Infinity hub is lighter and feature a new spoke lacing which increases stiffness for better power transfer and the Instant Drive 360 freewheel with a double ratchet provides fast engagement. The rear hub is compatible with Shimano HG9 Micro Spline and SRAM XD driver bodies. The Crossmax SL S is available with 6-bolt or center lock brake rotors in 29” only. It’s compatible with a 15x110 front axle and 12x148 rear and comes with valves replacement spokes and accessories. Key benefits Best in its class alloy XC wheelset ISM4D rim machining reduces weight to close the gap to carbon rims without compromising strength. Lighter weight rims result in super low inertia and instant acceleration. Increased traction and durability 25mm wide hookless rim profile optimized for lower tire pressures resulting in improved grip in all conditions. Optimized for modern XC tubeless tires from 2.1 to 2.30'. Black Shield treatment protects rims against impacts and scratches. Most user-friendly tubeless system Fore technology fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and durability of the rim. Rims Material: Maxtal Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Weight reduction: ISM 4D ETRTO size 29: 622x25TSS Internal width: 25 mm Hookless profile Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Hubs Instant Drive 360 freewheel technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Infinity hubs Intended use Recommended tire sizes: 52mm to 76mm (20 to 30) ASTM CATEGORY 3 : CROSS COUNTRY For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) 15mm front hub cap (V2372501 - Delivered with the wheel) Boost : Torque Caps for Center Lock hub (V2374401) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Compatibility Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Part of Fairdale's collaboration with Toy Machine the Macaroni has been given a vibrant red colourway that is covered with those signature Toy Machine graphics. The Macaroni is built with the perfect geometry to help the younger rider feel at home during seated pedalling and leaves room to grow for most kids between 6 and 9 years old. It's built from 1020 steel with a 1-1/8" integrated head tube and a 1020 steel 1-1/8" steerer tube, the Macaroni also comes with a Sunday Freeze front load stem, an Odyssey Springfield U-brake and Sunday Current Tyres. Each Fairdale x Toy Machine Macaroni Bike comes with a special edition book about the adventures of Macaroni the Unicron Tiger to add a little extra fun. ###section### Product Specs FRAME MATERIAL: 1020 Steel WHEEL SIZE: 20" TOP TUBE LENGTH: 17.3" CHAIN STAY LENGTH: 14" HEADTUBE ANGLE: 69° SEAT TUBE ANGLE: 72° FORKS: 1020 Steel 1-1/8” Steerer tube BARS: Fairdale Macaroni, 1020 Steel STEM: Sunday Freeze, Front Load HEADSET: FSA, Sealed Integrated BRAKE MOUNTS: Welded U-Brake BRAKES: Odyssey Springfield U-brake FRONT HUB: 36H, 3/8” Axle , Aluminum Shell, Looseball FRONT RIM: P-7X, 36-H, Aluminum, Single Wall, Pinned Joint REAR HUB: 36H, 14mm Axle, Aluminum Shell, Looseball Cassette REAR RIM: P-7X, 36-H, Aluminum, Single Wall, Pinned Joint TYRES: Sunday Current, 20 x 2.40" SPROCKET: 25t Steel CRANKS: 1-Piece, 115mm BB: Looseball, American PEDALS: Wellgo, Junior SEAT: Fairdale x Toy Machine GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm A great all rounder suitable for any type of riding Strong Hi-ten steel construction U-brake system on welded mounts U-brake system on welded mounts ###shogun-image-section###