Apply the Chain Cleaner on the chain, the front and rear derailleurs. Let the cleaner soak in for about 5 minutes then rinse off with soapy water. Rub with a dry cloth then re-lubricate the chain and drivetrain parts. Warning: Do not use on bearings and do not use Chain Cleaner on the frame & fork in extreme sun. Morgan Blue has the most complete range of maintenance products, including a complete massage line, which many of the continental Pro Teams use.
Apply the Chain Cleaner on the chain, the front and rear derailleurs. Let the cleaner soak in for about 5 minutes then rinse off with soapy water. Rub with a dry cloth then re-lubricate the chain and drivetrain parts. Warning: Do not use on bearings and do not use Chain Cleaner on the frame & fork in extreme sun. Morgan Blue has the most complete range of maintenance products, including a complete massage line, which many of the continental Pro Teams use.
Rubber and plastic safe
Fully equipped with a can of Muc-Off Bio Chain Cleaner, capable of 35 cleans from one single tin, the Chain Doc Chain Cleaner is ready to rid your chain of dirt, grime and crud immediately. Simply clip the machine to your chain and spin it through the Doc's body while spraying the cleaning fluid on to your links. Within just 19 seconds, your chain will be spotless and ready for lubing. Turning an essential and arduous chore into a super-speedy job, the Chain Doc Chain Cleaner is a must-have for any rider who regularly gets down and dirty. Directions for use: Step 1 - Position bike upright or mount in a workshop stand. Shift chain to middle front chainring and third smallest cassette for optimum chain tension. Step 2 -Hold the chain cleaning machine in your left hand with your thumb over the spray button and forefinger over the Chain Doc trigger. Position the open Chain Doc over the chain. Step 3 - Pull trigger to close the Chain Doc. Spin pedals backwards for 2 to 3 revolutions while spraying chain cleaner through Chain Doc. Continue for a further 2 to 3 revolutions without spraying. Step 4 - Rinse chain and chain cleaning machine thoroughly with clean, fresh water.
But that's not all. Nano Muc-Off will also leave an invisible protective 'Nano Layer' which contains anti-corrosion additives to guard against surface corrosion, both during and after cleaning. Their Nano Tech formula will also leave a sparkling lustre on all surfaces which will reduce dirt adhesion. What is Nano? Nano deals with materials & objects on the scale of a nanometre (one-billionth of a metre). How small is a nanometre? Very small, approximately 1/80000th of the diameter of a human hair! This compares to traditional chemicals which use micro scale materials which are approximately 1/80th the diameter of a human hair. Alex Trimnell, Muc-Off's Managing director comments: "We are very excited by our new Nano Tech formula, this is a giant step forward for bike cleaners! The formulation is so advanced that it will now remove grime with even less user effort and it also increases the protection for the whole bike both during and after cleaning - it's now truly a space aged technology cleaner!" The UK's Number one bike cleaner, Muc-off is an incredibly effective cleaning formula that also cares for your bike's delicate finishes. It contains no harmful acids, CFCs or solvents so it's completely safe to use on all parts of your bike (including paintwork, aluminium, anodising, rubber, suspension seals, disk brake pads, leather, carbon fibre, composites and decals etc) and won't harm you or the environment. It cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean. Make life easy......try Muc-Off Nano Tech after your next dirty ride!
Muc-Off's unique formula contains a fusion of 3 separate waxes and a number of highly advanced ingredients that combine to product a superior protective treatment that is safe to use on paintwork, carbon fibre, chrome, metal & plastics. It's also amazingly easy to apply/buff off leaving a shine that has to be seen to be believed Carnauba Wax is one of the principal components and is universally recognised as the hardest naturally occurring was known to man. Silicone Oils allow easy application and provide additional depth of shine whilst our added Mild Polishing Aids remove microscopic imperfections, fill mirror scratches and enhance both the appearance and feel of your rig and components without leaving a chalky white residue. The really clever part of Miracle Shine is our Fluoro Polymer Technology which we have incorporated for its amazing ability to repel water and atmospheric pollutants. It will also be easier to wash and will even stay cleaner in-between washes. Each time you apply Miracle Shine a Fluoro Polymer layer 'knits' together to form a microscopic, ultra tough protective barrier that can extend the lifetime of the finish by preventing the build up of dirt and grime.
Made using state-of-the-art anti-corrosion additives and inhibitors, this hard-working liquid eliminates moisture by setting a dry film on your frame and components. This prevents sweat and other moisture from inhibiting the performance of your bike and training setup. Used as both a prevention and a cure for rust, it is easily applied to affected areas with the included 'Genius Straw', for an efficient and effective application. Directions for use: Shake can vigorously. After washing the surface with Muc-Off Equipment Cleaner, apply Sweat Protect to any surface that needs protecting to disperse remaining moisture. Spray directly onto the surface and leave in place for a higher level of protection, or for an even thinner coating wipe off any excess fluid with a cloth. Note: Mask braking surfaces before application. Store in a cool, dry place. Do not apply to tyre tread or braking surfaces.
Fit for use on a variety of materials, this spray-on solution breaks down sweat and other moistures generated by your hard-riding workout and is simply wiped clean to give a sparkling finish to your bike, gym equipment and other surfaces. Directions for use: 1. Apply Equipment Cleaner to all required surfaces. 2. Leave for a few seconds and then wipe off with a clean microfiber cloth. 3. Store in a cool, dry place. Tip: Use Muc-Off Sweat Protect after cleaning to ensure your bike is protected and corrosion free.
The Muc-Off Drivetrain Cleaner is the complete drivetrain cleaning solution. Pour into a chain cleaning device or apply directly to the chain rings, rear cassettes and derailleurs to clean the entire drivetrain within seconds. It’s also biodegradable and safe on metal, plastic, rubber and seals. Try using it with the Muc-Off X-3 Chain Cleaning Device to provide the deepest clean on even the dirtiest chains. Directions for use: Shake bottle vigorously and spray all over the drive chain including cassette, chain rings, chain and derailleurs. Leave for up to two minutes and agitate with a brush if required (if using with a chain cleaning device). After agitation, thoroughly rinse off with water making sure all of the formula has been removed. More info: Bio: Eco Friendly, unique formula contains no harmful acids, CFCs or solvents and is fully biodegradable MPORA: Voted 5 Stars by MPORA.com Time: Cleans all drive chain areas in seconds. Spray on. Agitate. Rinse off. Simple Please Note: Trigger spray is not included.
Whether sprayed directly on to your drivetrain areas or poured into a chain cleaning machine such as the Muc-Off X-1 Chain Cleaning Device, Muc-Off Drivetrain Cleaner (500ml) will instantly get to work on breaking down built-up grease, muck and whatever else your rides have splattered on your vital components. Biodegradable and safe for use on a range of materials and surfaces including carbon fibre, paintwork, anodised surfaces, aluminium, titanium, rubber, plastic, seals and disc brake pads, it is the complete drivetrain solution.
This advanced bike cleaner spray quickly and safely eliminates built-up oil, grease and grime on metal, plastic, rubber and seals. The biodegradable formula means that after use it can be quickly rinsed away with water to leave your greasy bike parts clean. Muc-Off's research and development team put in the hours to make sure the Muc-Off Water Soluble Degreaser works on even the toughest of grime including waterproof grease and chain lube residue. How to Use: Step 1 - Shake can to activate formula and apply to the selected area for cleaning Step 2 - Leave up to 5 minutes and use a brush or cloth to agitate stubborn grease, grime and other contaminants Step 3 - Rinse with fresh, clean water and allow to dry or wipe away any excess with a clean cloth Please Note - Do not use on hot surfaces.
The Ultimate Chain Lubricant This Hydrodynamic Chain Lube is the Ultimate in bicycle chain lubricant technology. If you are looking for the most efficient chain lubricant formula for long distances and/or the harshest of weather conditions, look no further. The Story Born in 2014 and baptised at the most famous French road race in the world, with the worst weather conditions seen in years, our new Hydrodynamic Chain Lube is the first to be created by the Muc-Off research team, Hand blended in the UK, we used the finest ingredients to create a sophisticated, synergistic blend of esters coupled with aerospace quality based oil lubrication, before packing it with ground-breaking extreme pressure additives. All this means it’s possible to create a high strength film forming lubricant which prevents metal to metal contact to ensure peak performance, even under the most extreme workloads that a pro peloton can throw at it. Each handmade batch takes hours of painstaking work to deliver a highly advanced bicycle chain lubricant, reaching previously unobtainable levels of lubrication and protection. Testing At Muc-Off, they thrive on challenges, so they designed and built a Chain Lube Optimisation Dyno (aka C.L.O.D) that could provide quantifiable data, a world-first for a bicycle chain lube manufacturer. They can now test and analyse all bike lubricants in minute detail, giving them an advantage over all our competitors in formulation development. After over 15 formulas and hundreds of hours of lab and real-world testing, they have arrived at their newest breakthrough - ‘Hydrodynamic’. This formula strikes the perfect balance between chain lube efficiency and resistance to environmental conditions. This means it gives you the ultimate protection but with an incredibly low friction coefficient, even in the harshest conditions. UV Dye Use the UV Torch to clearly indicate 100% link coverage Ultra-Low Friction The lowest possible friction is created by this product Hydrodynamic Formula Revolutionary formula reduces metal to metal contact Hydrophobic Formula Hydrophobic elements make this lubricant ultra water-resistant All-Weather Conditions This product is optimised for any weather condition Directions for use: 1. Fully de-grease drive chain thoroughly before lube application. 2. Ensure the drive chain area is dry. 3. Shake the bottle vigorously and apply a moderate amount of Hydrodynamic lube to the inside chain link, whilst spinning pedals in a reverse motion. 4. Ideally apply 3-4 hours before your ride. 5. Check to make sure the lube coverage is even using the supplied UV Torch. 6. Wipe excess lube carefully.