XLab Gear Box Bike Repair KitPerfect for repairs on the go, the XLab Gear Box Bike Repair Kit is stylish and space-saving and includes a state-of-the-art clincher repair kit. Easily mountable on XLab's Gorilla and Chimp cages as well as most other cages, the Gear Box can be secured on rear or frame mounted cages with its stylish anti-launch finish. Compact and Carbon-Look Care Box Divided in to two internal compartments for tools and spares, the Gear Box is sound-proofed and padded to make for as noiseless a ride as possible. The Gear Box comes complete with: Tri Tool Kit: 10 double chrome, cold forged tools in a compact easy-to-carry size Hex Key - 2 mm, 2½ mm, 3 mm, 4 mm, 5 mm, 6 mm Open wrench - 8 mm T25 torx Flat screwdriver Silicone band to protect tool kit Speed Chuck Inflator 2 Tyre Levers: Large, no-slip gripFeatures: Capacity: .42 litre Height: 133.5 mm Weight: 447 g (with full kit inside) 65 g (empty)Buy Xlab Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Keep your most commonly used tools close at hand with this clever, multi-function tool holder, The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas, Available in two versions, the Tool Kaddie rotates for easy access and is moulded from a durable composite material, Specific slots and holders for 3-way hexes, screwdrivers, P Handles, pliers/cutters, Generic slots and holders to hold a wide variety of tools and small parts, Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately), Built in Receiver Port for PTH-1 Paper Towel Holder (sold separately).
RoadAn all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to reinflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treads,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it-Æs also a good idea to give the Air system a try at home before you need to do it 'in the field',Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch,In addition, there-Æs an air hose for CO2 inflation if you just need to air up through the valve stem,Made with pride in the USA using patented technology and warrantied for life under normal usage,.MTBAn all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to reinflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tube,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it-Æs also a good idea to give the Air system a try at home before you need to do it 'in the field',Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch,In addition, there-Æs an air hose for CO2 inflation if you just need to air up through the valve stem,Made with pride in the USA using patented technology and warrantied for life under normal usage.
Description for Birzman Feexstand Repair Stand not available
A complete tubeless tire repair / CO2 inflation kit for road and touring enthusiasts packed into a sleek under top tube mounted organizer case. Internal organizer keeps gear neatly and securely in place. Includes Tubi 11 Power Lever X 3 pcs of 3.5mm x 5cm tire repair plugs and AirBooster CO2 inflator with enough room to carry two 16g CO2 cartridges and a spare tube up to 700 x 40c. *CO2 cartridge and inner tube not included Repair Kit includes• Tubi 11 tool Power Lever X 3x3.5mm x 5cm tyre repair plugsAirBooster CO2 inflator plus spacespace for two 16g CO2 cartridgesand 700 x 40c tube (cartridges andtubes not included). CAPACITY 0.6 L COMPARTMENTS One main internal organizer SEAT TUBE DIAMETER Fits ø28 - ø60 mm TOP TUBE DIAMETER Fits ø28 - ø70 mm MATERIAL 1000D Nylon WEIGHT 363.5 g / 12.82 oz (Bag with repair kit)162 g / 5.71 oz (Bag only) SIZE 23.3 x 9 x 4.3 cm / 9.2” x 3.5” x 1.7” COMPATIBILITY Up to 700 x 40c inner tubes ADDED FEATURES Waterproof zipper
Ideal for long-distance touring and gravel grinding adventures, this gravel gear bag includes a multitude of tubeless tyre repair essentials, housed within an ultra-durable and waterproof 1000 denier Nylon construction. Tubeless Tyre Repair Kit for Touring and Adventure Cycling A complete tubeless tyre repair / CO2 inflation kit for road and touring enthusiasts packed into a sleek, under top tube mounted organizer case. The internal organizer keeps gear neatly and securely in place. Includes Tubi 11, Power Lever X, 3 pcs of 3.5mm x 5cm tire repair plugs, and AirBooster CO2 inflator with enough room to carry two 16g CO2 cartridges and a spare tube up to 700 x 40c (cartridges and tubes not included). Added Features: Waterproof Zipper Single main compartment Mounts to frame with velcro straps Fits top tube: 38-170mm diameter Fits seat tube: 38-52mm diameter Repair Kit includes Tubi 11 tool, Power Lever X, 3x 3.5mm x 5cm tyre repair plugs, AirBooster CO2 inflator, plus space for two 16g CO2 cartridges and 700 x 40c tube (cartridges and tubes not included) Topeak Part Number: TC2278B
The No Puncture Hassle 5L from Muc-Off is made from a robust, puncture proof formula that keeps your tyres running perfectly after a puncture. Compatible with tubeless ready and full UST wheels/tyres, No Puncture Hassle 5L works from 15psi-120psi and temperatures from -20°C to +50°C. The unique formula contains microfibre molecules to fill larger tears and holes plus the advanced latex forms a secure seal when you need it most. Thanks to the UV detection system, you can see any punctures that weren't noticeable previously for maximum protection. The 5L version of No Puncture Hassle is the perfect solution to keep in your home workshop for keeping your bike in peak condition. With the addition of the included pump dispenser, you can easily seal your tyres more accurately and efficiently than before, without leaving any unnecessary waste behind. Developed by the world's top pro peloton and downhill teams with the goal of making the best performing sealant possible. Easy to use, the formula is non-corrosive, biodegradable and will wash off. MINIMUM AMOUNT PER TYRE: (add up to 30ml extra for increased protection) Road: 30-45ml (2 to 3 scoops) 26" MTB & 27.5": 60-75ml (4 to 5 scoops) Cross 700c: 60-75ml (4 to 5 scoops) 29" MTB: 105ml-140ml (7 or the whole pouch) Downhill: 120-140ml (8 or the whole pouch) DIRECTIONS FOR USE - 5 LITRE 1. Shake bottle vigorously before use. 2. Put your bike in a work stand if possible. 3. Ideally, use this container to refill our 1 litre bottle or simply use the pump to apply directly into an unseated tyre. 4. Finish by remounting and inflating the tyre in accordance with your manufacturer’s recommendations. 5. Repeatedly spin the wheel, shake it from side to side and hey presto you’re now ready to rock ‘n’ roll! 6. Keep out of reach of children. 7. Dispose of contents/container in accordance with local regulations. 8. Avoid contact with eyes. Do not drink.
Topeak Gravel Gear Bag and Repair KitThe Gravel Gear Bag and Repair Kit from Topeak is a tubeless tyre repair and CO2 inflation kit that mounts securely under your bikes top tube. Ideal for long distance touring and gravel grinding adventures, this gravel gear bag includes a multitude of tubeless tyre repair essentials, housed within an ultra-durable and waterproof 1000 denier Nylon construction.Tubeless Tyre Repair Kit for Touring and Adventure CyclingA complete tubeless tyre repair / CO2 inflation kit for road and touring enthusiasts packed into a sleek, under top tube mounted organizer case. Internal organizer keeps gear neatly and securely in place. Includes Tubi 11, Power Lever X, 3 pcs of 3.5mm x 5cm tire repair plugs, and AirBooster CO2 inflator with enough room to carry two 16g CO2 cartridges and a spare tube up to 700 x 40c (cartridges and tubes not included). Features: Capacity: 0.6 L Compartments: One Main, Internal Organizer Seat Tube Diameter: Fits Ø28 - Ø60 Mm Top Tube Diameter: Fits Ø28 - Ø70 Mm Material: Waterproof 1000 Denier Nylon Weight: 363.5 G / 12.82 Oz (Bag With Repair Kit); 162 G / 5.71 Oz (Bag Only) Size: 23.3 X 9 X 4.3 Cm / 9.2” X 3.5” X 1.7” Compatibility: Up to 700 X 40c Inner Tubes Added Features: Waterproof zip Single main compartment Mounts to frame with velcro straps Fits top tube: 38-170mm diameter Fits seat tube: 38-52mm diameter Repair Kit includes Tubi 11 tool, Power Lever X, 3x 3.5mm x 5cm tyre repair plugs, AirBooster CO2 inflator, plus space for two 16g CO2 cartridges and 700 x 40c tube (cartridges and tubes not included)Topeak Part Number: TC2278BBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Create your own workshop. A bench mount version of the popular PCS-10 Home Mechanic Repair Stand with a quick adjusting cam-type clamp and durable powder coat finish. Mounts to any flat horizontal surface. Key Features: A bench mount version of their popular PCS-10 Home Mechanic Repair Stand. Features a quick adjusting cam-type clamp that fits tubes up to 76 mm (3 inches) and rotates 360 degrees for easy access to any part of the bike. Clamping pressure is fully adjustable to prevent damage to thin walled tubes. Durable powder coat finish. Mounts to any flat horizontal surface (mounting bolts not included).
The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair It features 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability The PCS-9.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-9.3 is the perfect way to upgrade your home shop ! Product Features: Fully adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts Narrow clamping jaws (2.7 /70mm) fit into tight areas or on short seat posts Durable textured powder coat finish Maximum weight capacity: 80lbs. (36kg) Height adjustable from 39 to 57 (990mm - 1450mm) Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) Folds down to 44 x 14.5 (1140mm x 370mm) Weight: 16lbs. (7.2kg) QK2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray Note: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs Suitable for all bike, including e-bikes, including the maximum weight limit.
The Park Tool PCS-9.3 is a basic folding bicycle work stand designed and built for the home mechanic and provides a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Fully adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsDurable textured powder coat finishMaximum weight capacity: 80 lbs. (36 kg)Height adjustable from 39" to 57" (990 mm 1450 mm)Base when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 44" x 14.5" (1140 mm x 370 mm)Weight: 16 lbs. (7.2 kg)#2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray*NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop.
The PRO Bike Repair Stand is a versatile and adjustable stand designed to make it easier for you to work on your bicycle at homeDesigned to provide you with a better sports' bicycle experience the PRO Bike Repair Stand is a must-have for any avid home mechanic. The Bike Repair Stand provides a stable platform from which you can work on your bike, while elevating it off the ground. Due to its lightweight alloy construction it is both sturdy and light enough to travel with, a task with is made easier by the fact that it folds away into a carrier-bag. It also boasts an adjustable design, allowing you to manipulate the stand to hold your bike in the best possible manner in order to repair it. It can extend to 162cm tall and is rated to hold a maximum of 30kgFeatures:Foldable and adjustable repair stand,Securely holds bike for home repairs,Lightweight alloy construction,Folds into a carrier bag for travel,Includes tool plate for holding spare parts and tools during repairs,Max height: 162cm,Max weight: 30kg.