Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Sprocket Remover / Chain Whip (SR-18.2)If you regularly work on single speed bikes, the SR-18.2 Sprocket Remover and Chain Whip is the ideal tool for making your rear wheel repair jobs easier. Professional bike tool experts Park Tool have made the handle from heat-treated material and added a moulded handle for extra hand comfort.Durable Chain WhipHeat treated to make sure the tool won't bend or flex, this tough bike tool has a moulded handle for optimum comfort when loosening and tightening. The chain part of the tool features hardened pins to keep it firmly in place when latched to the sprocket, while the 1" box-end wrench will fit Park Tool freewheel and cassette Lockring Tools to make removal that bit easier. This is a hard-wearing maintenance must-have for any workshop or toolkit.Features: Material: Heat Treated Metal, moulded Plastic handle Compatibility: 1/8" fixed gear sprockets and single speed cassettesWorks on 1/8" fixed gear sprockets and single speed cassettes1" (25.4mm) box-end wrench fits Park Tool freewheel/cassette lockring toolsFeatures hardened pins to keep the chain in place Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover (FR-1.3) The Freewheel Remover FR-1.3 is another well-crafted tool from Park Tool, designed for the efficient and easy removal and installation of the most common thread-on 12-spline 5-10-speed freewheels. Simple Freewheel Removal and Fitting Fitting perfectly on to your axle, the FR-1.3 makes light work of fastening or loosening your freewheel for quick and easy removal and replacement. Compatible with a wide range of freewheels, this Park Tool device features an enlarged thru-hole, capable of accepting wheels with axles up to 14mm diameters, including E-Bike wheels. The 1" hexagonal end of the FR-1.3 makes it easily compatible with most wrenches and bench vices for additional leverage and support. Features: Compatibility: Shimano, Sachs Aris, Sun Race, DNP Epoch and other 5-10-speed freewheels Size: 22.6 mm Diameter + 1" Hexagonal Head Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Removal Tool (16.39 XTR)The Pro BB Removal Tool 16.39 XTR from LifeLine provides a firm and reliable grip on specific threaded bottom bracket cups for efficient maintenance. It's compatible with Shimano XTR BB93, Dura-Ace BB9000 and Token.Features:Full CNCAnodised24mm Hex end spanner AND 1/2'' drive wrench16 notch 39mm OD cups Compatible With: Shimano XTR BB93 Dura-Ace BB9000 Token Added depth to fit Shimano STEPS square drive motoBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Removal Tool (16.44 BB80)The Pro BB Removal Tool 16.44 BB80 from LifeLine provides a firm and reliable grip on specific threaded bottom bracket cups for efficient maintenance. It's compatible with Shimano BB80, BB5700, XT BB70, BB51 and previous external bearing threaded cups.Features:Full CNCAnodised24mm Hex end spanner AND 1/2'' drive wrench16 notch 44mm OD cup Compatible With: Shimano BB80 BB5700 XT BB70 BB51 Previous Shimano external bearing threaded cups Also fits many external threaded types for Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and othersBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Removal Tool (16.41 BBR60)The Pro BB Removal Tool 16.41 BBR60 from LifeLine provides a firm and reliable grip on specific threaded bottom bracket cups for efficient maintenance. It's compatible with Shimano BBR60 (Ultegra 11 speed 6800 series) and Shimano MT-800.Features:Full CNCAnodised24mm Hex end spanner AND 1/2'' drive wrench16 notch 41mm OD cup Compatible With: Shimano BBR60 (Ultegra 11 speed 6800 series) Shimano MT-800Buy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Removal Tool (12.46 DUB)The Pro BB Removal Tool 12.46 DUB from LifeLine provides a firm and reliable grip on specific threaded bottom bracket cups for efficient maintenance. It's compatible with SRAM DUB, Race Face Cinch, Hawk Racing BB3086 and others.Features:Full CNCAnodised24mm Hex end spanner AND 1/2'' drive wrench12 notch 46mm OD cup Compatible With: SRAM DUB Race Face Cinch Rotor BSA30 Zipp Vuma Hawk Racing BB3086Buy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
KMC Missing Link Remover PliersAn essential tool for your workshop, the KMC Missing Link Remover Pliers makes light work of installing or fixing your chains. Featuring a comfortable, easy grip, you can carry out essential maintenance without the hassle.Features:Ideal tool for adjustments and repairs to KMC chainsGenuine, workshop-quality KMC tool.Size: 16x10.5 cm
LifeLine X-Tools Pro Cassette Remover Cassette remover for Shimano® HG cassettes with centre pin. Ergonomic handle with durable construction will last longer than most tools.Buy LifeLine Cassette Remover from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine X-Tools Pro Crown Race Remover ToolThis tool enables the removal of your forks headset crown race from your fork safely and conveniently. The LifeLine Crown Race Remover provides a secure, even grip and an accurate striking surface for easy, damage-free crown race removal. Essential for fork and headset upgrades. Steerer Tube Compatibility: 1", 1-1/8", 1-1/4" and 1-1/2"Instructions: Position the headset crown race remover around the head cup bottom. Drive the nuts of both sides of the remover evenly to ensure balance.*Note: Apply equal pressure by pushing the nuts with the same number of threads.Buy LifeLine Crown Race Remover Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Wrench FRW-1The FRW-1 is a one-inch socket and securely holds freewheel and lockring tools (FR-1 through FR-8 plus the BBT-5/FR-11) for removal and installation. Features an investment cast head with locking setscrew and a long, round, vinyl-dipped handle for superior leverage.Features: One inch socket Securely holds freewheel Investment cast head Lone, round, vinyl dipped handle Note: Always use a skewer or axle nut to hold a cassette/freewheel tool in place during removalBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Remote Rear MTB ShockCombining an EVOL air spring, remote actuated open and firm modes as well as rebound and air spring pressure adjustments, this Factory Series mountain bike (MTB) rear shock is a perfect upgrade for uncompromised performance on your ride. Packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders, this model is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride.EVOL Air Spring and AdjustmentsThe Float DPS helps you make perfect turns without cutting corners by using a dual piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel.The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Two-position remote actuated Open and Firm modes, rebound and air spring pressure Remote Actuated: Yes Remote Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.