The Olfi one.five Remote allows you to control your Olfi one.five camera without having to reach for it, particularly useful if you re mounting your Olfi in hard to reach places or simply don t want to risk disturbing the shot you ve lined up.Waterproof (3 metres) remote with long life battery Removable attachment clip (2.5cm diameter) includedRF frequency to reduce camera battery consumptionWake your Olfi one.five up from power save mode or turn it off completely without disturbing your setup with the water resistant (up to 3m) Olfi Remote. You can use your remote to activate and change between video, photo or burst modes, and control the camera s wi-fi to enable a live preview on your smart device. The Olfi one.five Remote uses radio frequency (RF, with up to 5 metres range) rather than wi-fi to drastically reduce your camera s battery consumption and is powered by a long-lasting watch battery. It also comes with a detachable remote clip (2.5cm diameter) which mounts perfectly to Olfi s The Stick , the Wrist Strap for Remote and some bike handlebars.The remote is constructed from brushed aluminium with a rubber finish. All parts included can be used in water but should be rinsed in freshwater and thoroughly dried after each use. The remote is NOT compatible with the Olfi one.five White.
Having the right tool for the job is essential when working on modern bicycles. Pedro's Crank Remover gives the professional quality, precision fit tool required to properly remove press fit square taper. The Crank Remover is made from heat-treated tool steel for the ultimate in strength and long-lasting performance and features a floating tip design for easy crank removal. Fits all cranks using 22mm x 1 threads and splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a “self extracting” system. Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench, Equalizer Pedal Wrench, or 15mm Pedal Wrench.
The Wolf Tooth Remote Clamp Conversion Kit allows you to attach a Wolf Tooth Dropper Lever to a specific handlebar diameter or brake lever.By attaching the dropper level to a brake calliper this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means the the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, and SRAM Matchmaker X.The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. The Hope conversion kit is also compatible with Tech3 Hope brakes. Key Features: Conversion kit to fit Wolf Tooth Remote Action Dropper Lever or Remote Light ,Action Dropper Lever to different brake levers and handlebar diameters,22.2mm clamp for flat mtb bars and 31.8mm for drop road bars,Conversion kit for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, SRAM Matchmaker X,Delrin and aluminium parts.
Tool for removing and tightening lock rings. Fits Centre-Lock Disc rotors and HG cassettes Large internal diameter will fit over all axle locknuts Can be used with 3/4 inch drive torque wrench or ratchet driver
Key Features:Tool for removing and tightening lock ringsFits Centre-Lock Disc rotors and HG cassettesLarge internal diameter will fit over all axle locknutsCan be used with 3/4 inch drive torque wrench or ratchet driver
The Wolf Tooth 8-Bit Tyre Lever and Rim Dent Remover Multi-tool is a companion tool to the brand’s bestselling 8-Bit Pack Pliers, which reimagines the humble cycling multi-tool into an innovative, slim and multifunctional design.Paired to the 8-Bit Pack Pliers with magnets and pins, the Wolf Tooth 8-Bit Tyre Lever and Rim Dent Remover Multi-tool features a two-ended design for essential roadside or trailside repairs combining ease of use and maximum leverage.At one end, the thin, nylon composite tyre lever is designed to easily slip under the tyre bead – whether you’re running slimline road tyres, wider gravel rubber or full-on knobbies. With a secure hook and ultra-strong construction, it only takes this one tyre lever to wrest tyre from rim.At the other end is a rim dent remover, which is specially shaped to fit over the lip of metal rims and tested for strength and robustness in harsh Minnesota conditions. The dent remover is designed to help you restore metal rims to rideable condition at the trailside in case of a rock or pothole hit that dings your rim.Key Features:Part of the Wolf Tooth 8-Bit tool family,Nylon composite plastic tyre lever,Specially shaped rim dent remover,Secures to the Wolf Tooth 8-Bit Pack Pliers with magnet/pin interface,Created for cyclists by cyclists.
The IceToolz Press-Fit Bearing Removal Tool is a press-fit bottom bracket removal tool, for use on all 24mm and 30mm press-fit bb s.For BB bearings with internal diameter of ø24 - 30mmMaterial: Cr-Mo steel
Removing the crown race is an essential step when changing forks and headsets. Without the proper equipment, removing a crown race from a fork steerer can be a difficult and even damaging process. The LifeLine crown race remover features four sharp blades to reach behind the crown race and provide evenly distributed clamping force when the jaws are tightened. On the reverse, there are four recesses to securely place a screwdriver for alternate striking, allowing you to work the crown race free in a gentle and precise manner, and leaving the crown race and steerer intact. Essential for workshops and home mechanics working on fork/headset upgrades and bike refurbishments.
A 1x specific dropper post lever designed to be mounted on the left side of the handlebar for the Cannondale DownLow dropper post. Included: DownLow Lever Dropper Cable
LifeLine X-Tools Pro Crown Race Remover ToolThis tool enables the removal of your forks headset crown race from your fork safely and conveniently. The LifeLine Crown Race Remover provides a secure, even grip and an accurate striking surface for easy, damage-free crown race removal. Essential for fork and headset upgrades. Steerer Tube Compatibility: 1", 1-1/8", 1-1/4" and 1-1/2"Instructions: Position the headset crown race remover around the head cup bottom. Drive the nuts of both sides of the remover evenly to ensure balance.*Note: Apply equal pressure by pushing the nuts with the same number of threads.Buy LifeLine Crown Race Remover Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:100% 400 Lumen,35% 140 Lumen,Flash,120db Electric Horn,Remote Control Swtich,Burntime 3 - 5hrs,1200 mAh Lithium Ion battery,XPG Super Bright White LED.
Removable brake mount kit for current WeThePeople Frames, the kit includes two brake lugs, gyro tabs and cable guides. For use with WeThePeople frames made between 2013-2018 NOT COMPATIBLE WITH THE WETHEPEOPLE MESSAGE FRAME.