Key Features:Shimano compatible, sealed,Including suitable calibration sockets ,A: 8, 9, 10, 11 times Shimano,B: 7-speed Shimano & 8-speed Campagnolo ,C: Campagnolo 9-10 times ,D: Sram 9.0 ('97 / '98), 9.0 SL ('98), 7.0 ('97 / '98 / '99).
The Cateye ViZ 100 Rear Light is a 200 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the seat post etc.Key Features:3 LEDs (100 lumens),Focused lens for maximum visibility,Highly visible during daytime,Superior 300 degree visibility,Long rear beam projection,OptiCube™ lens technology,Lithium-ion rechargeable battery,USB rechargeable (Micro-USB cable included),Low battery indicator,4 modes: Constant / Flashing / Group Ride / Daytime Hyperflash,Mode memory function,Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.),New seat post bracket SP-15 which also fits contemporary (Kammtail) aero seatpost,Snap System™ bracket,Designed in Japan,.Runtime:Constant (15 lumens):5 hrs,Flashing (10 lumens):70 hrs,Group Ride (35 lumens):11 hrs,Daytime Hyperflash (100 lumens):15 hrs,Charging time (From empty) : 3 hrs,.Technologies:Opticube™: Our proprietary OptiCube™ lens technology maximizes brightness for greater visibility.,Snap System™: Allows riders to place rear lights on various locations in both horizontal and vertical orientations.,Side Visibility: Provides 300° visibility from the side to increase safety.,Low Battery Indicator: Alerts when remaining battery gets low.,Daytime: Can be used in the daytime.,All Weather IPX4: Can be used in rainy weather.,.
The all new Tight Kinetic rear bike light packs a punch with Cateyes Kinetic brake technology. The built in acceleration sensor for Kinetic Mode that automatically changes the light from Low or Flashing mode, to High Constant mode to perform as a traditional brake light.Highly waterproof and durable against vibration, the 2 x AAA batteries gives incredibly long life performance whilst the 360 degrees of visibility give you the confidence to know that you ill be seen and be safe.Key Features:Built-in acceleration sensor to detect deceleration under braking,Waterproof design (Waterproof performance: IPX7),Long battery life of up to 180 hours,Rugged body with resistance to vibration while riding,Achieves 360-degree light distribution,High brightness, low power consumption design using 5 LEDs,Equipped with 3 modes, 2 flashing modes + 1 constant mode,Easy switching between constant and flashing with one button,Mode memory function turns the light on in last used mode,FlexTight™ (SP-11) bracket can be fast and securely fixed to the seatpost and seatstay without tools.,Compatible with clip (C-2) to attach to pocket or bag,2x AAA batteries included,Only 49g.Runtime:Low: Approx. 70 hours,Flashing: Approx. 160 hours,Rapid mode: Approx. 140 hours.*The more frequently the brake (kinetic) mode works, the shorter the operating time.Technologies:Kinetic / Brake Mode: Automatically turns on High Constant mode when slowing down to work like a traditional brake light,OptiCube™: Our proprietary OptiCube™ lens technology maximizes brightness for greater visibility.,Side Visibility: Provides visibility from the side to increase safety.,FlexTight™: The innovative and versatile Flextight™ bracket can quickly and securely fastened to virtually any handlebar or stem with no tools required,Daytime: Can be used in the daytime.,All Weather: Can be used in rainy weather.
Cateye Orb Set Front/rear Battery LightQc TestingTo underline their quality and reliability, Cateye products undergo the most stringent QC tests in the industry, many of which exceed the requirements of CE. Also used in the Japanese auto industry, Cateye’s testing equates to a return rate of less than 0.9% across the brand.Opticube Lens TechnologyCateye maximise the best beam pattern from any LED, utilising superior lens and reflector technology to emit a higher quality light and beam pattern in front of the rider, even with lower Lumen amounts.Long Press To Turn On & OffA feature appreciated by consumers to prevent accidentally switching on lights and loosing battery power. This feature also ensures that a light is not accidentally turned off during a ride.Integral Heat DissipationSuperior heat dissipation maximises the lumen power of the light for consistency of lumen output.Never Cycles Through The Off ModeCateye were the first to introduce this feature, to avoid the rider being accidentally left in complete darkness while changing beam modes.Front Light FeaturesDouble-click to high (headlights 400 Lm and above) to achieve maximum brightness instantly without cycling through modes; double-click to flashing (headlights up to 200 Lm) to quickly cycle between constant and flashing modes, ideal for commuting use.Rear Light FeaturesTrue 180 degree visibility; battery auto-save, automatically changing to flashing mode to allow more time to finish the ride as opposed to being left in the dark.Key Features:Durable aluminium construction with anodised finish.,Lens acts as power / mode button,70% brighter than former Loop 2 battery lights,Low profile, low weight – only 20g,Strong sideways visibility,2 x 2032 batteries included,Mode: Output, Runtime.Front:10 Lm,Constant: 50 hrs,Fast Flashing: 100 hrs,Slow Flashing: 100 hrs .Rear:5 Lm,Constant: 50 hrs,Fast Flashing: 100 hrs,Slow Flashing: 100 hrs.
Cob led technologyTaking cues from some of knog's most technologically advanced lights, frog now features advanced chip on board (cob) led technology. This allows frog to create high intensity light in a compact and low-profile light. Producing 45 lumens for the front light and 25 for the rear. These lights are powerful enough for everyday commuting or as a complement to your existing lighting set-up.Advanced side visibilityAnother benefit of the cob technology is that it allows the led's to be arranged on a curved board. This means that light is emitted from the sides of the light greatly adding to the side visibility of the light and the additional safety this affords the rider.One button operationOne large, easy press button makes the operation of these lights super simple, even in gloves.Usb rechargeableThis is the first frog light ever that is rechargeable; simply plug it into a usb c to charge. A full charge is achieved in just 3 hours.100% waterproofWith an ip rating of ip67, these lights keep on shining whatever the weather.Multiple modes8 modes to choose from.Long lastingWith up to 50 hours between charges, you'll have light whenever you need it.Compact lightweight designWeighing in at just 20g and with a streamlined and compact design, frog can be mounted on even the most cluttered bike's cockpit without interfering with its operation.Integrated flexible mounting systemWith no tools required to mount the light and featuring an integrated strap & flexible body, frog is easily mounted anywhere on your bike, your helmet... Wherever.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.