Features:The high quality, economic alternative cycle carrier mainly for saloon cars,Easy to mount onto the rear door,All parts in contact with the car and bikes are coated with rubber for extra protection,Carries a maximum of three bikes,Prepared for fitting Thule light board 976,The Thule 968 has a load capacity of 60 kg and weighs 14,5 kg,Fits all frame dimensions,Equipped with rubber coated frame holders,Allows boot access with carrier and bikes mounted,.
Shimano's new Direct Mount Rear Derailleur system gives more space around the rear frame dropout resulting in easier rear wheel removal but also allows frame designers to shorten chain stays increase axel sizes and move suspension pivots Direct Mount gives a simpler cleaner look Deore XT Shadow+ Dyna-Sys 10-speed rear derailleur delivers reliable and precise shifting with a stiff and lightweight open design Shadow+ features a super low profile design that reduces the risk of damage from trail side hazards Shadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shifting. This can be switched off to remove the wheelDirect cable routing prevents snagging from any trail side hazards All-alloy construction leads to lower weight without compromising strength and durability Four fluorine-coated link pin bushings make this one of the slickest shifting derailleurs on the trails High rigidity wide outer link braces the pulley body to increase pivot joint rigidity resulting in a crisp shift Strong return spring for a positive shifting feel Durable sealed bearing pulleys 35T capacity GS cage
This rear wheel features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future. The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke. The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Full range of spare parts available.
All parts in contact with the car and bikes are coated with rubber for extra protection.
The DT Swiss M 1900 SP model boasts a 35mm external width, perfect for rolling you from trail to trail with stability and confidence. Robust and hard-wearing, it confidently handles bumps and impacts as you ride your mountain bike (MTB) over stones and roots, while staying light enough for attacking challenging hills. Strong and Durable, Aluminium Rear MTB Wheel This durable aluminium wheel is kept stiff and responsive by DT Champion spokes, tightened to optimal tension by their ProLock nipples and laced through the DT370 hub. Featuring a tubeless-ready profile for enhanced grip and puncture protection when riding with lower tyre pressures and Centre Lock disc brake compatibility for all-weather stopping power, this M1900 wheel is a great addition to adventurous MTB. Included: Tubeless tape 32mm Tubeless valve MTB 32mm IS 6-bolt adapter MTB
Hope RS4 Rear Road Hub (Rim Brake)Hope's reputation continues to grow internationally; they have achieved global recognition due to the high-quality products they offer to the market. This RS4 Rear Road Hub is strong, smooth, and serviceable. This hub is modestly light at 262 grams; the hub shell is made from T-6 aluminium billet and is paired with stainless steel cartridge bearings for durability and, when the time finally comes, easy servicing.Featuring 44-point engagement, reduced drag ratchet mechanism, and a two-pawl ratchet, this RS4 Rear Road Hub offers a consistently smooth rolling performance.Features:Material: Forged T-6 Aluminium Billet (hub shell); Stainless Steel (cartridge bearings)Axle Width: 130mm44-point engagement (8 deg)Unsurpassed reliabilityServiceableReduced drag ratchet mechanismTwo-pawl ratchet9/10/11-speed Shimano or Campagnolo compatibleWeight: 262g (32 hole Shimano option)Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Thule 968 FreeWay 3 Bike Rear Door CarrierThe 968 FreeWay Rear 3-Bike Carrier is a rear-door mounted three bike carrier designed for hatchbacks and sedans (for 3 bikes).The high quality, economic alternative cycle carrier mainly for saloon cars.Features: Carries a maximum of three bikes The high quality, economic alternative cycle carrier mainly for saloon cars Easy to mount onto the rear door All parts in contact with the car and bikes are coated with rubber for extra protection Prepared for fitting Thule light board 976 The Thule 968 has a load capacity of 45kg and weighs 14.5kg Fits all frame dimensions Equipped with rubber coated frame holders Allows boot access with carrier and bikes mountedBuy Thule Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a wide 22mm rim profile that's optimized for high-volume tires this UST Road Tubeless wheel system is built for adventure.Perfect for riding on rough roads gravel or dirt it gives you the smooth-riding performance of tubeless tires and makes it easy to set them up without any hassles. Low rolling resistance and a reduced risk of punctures add up to a better overall riding experience especially on rugged terrain.The wheels are engineered for the unique demands of disc brakes built up with 24 straight-pull spokes which are stronger than J-bend spokes. So wherever the road goes and however rough it gets you're ready to keep things rolling. Key benefits Purpose-built for riding rough roads gravel or dirt. 22mm wide rim takes tire up to 62mm. UST Road Tubeless technology improves comfort and rolling resistance and reduces the risk of punctures. Compatible with all standard retention systems. Proven performance and reliability at an attainable cost. High-quality QRM cartridge bearings. Disc-brake-specific sleeved-style rim technology. Straight-pull round spokes which are stronger than J-bend spokes. Rolling efficiency and a nimble ride quality. Sleeve joint rim minimizes weight. Consistent and stable spoke lacing. Low-friction hubs. Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 65 mm Disc brake specific profile Joint: sleeved Internal width: 23 mm Height: 22 mm ETRTO size: 622x23TC Spokes Shape: straight pull round Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Nipples: steel ABS Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 55bar/80PSI with a 28mm tyre - 325bar/47PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Color: Black only Disc standard : 6 Bolts or Center Lock® Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 12x135 rear axle adapters (V2510901) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction, it offers aspiring road riders the clear performance benefits of a high-quality wheelset.This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight-pull spokes for added stiffness and strength, and we also increased the spoke count to 24 on both front and rear wheels.With a 17mm internal width, these rims are compatible with tires up to 32mm, making them versatile, comfortable and ideal for challenging road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability.The Aksium Disc is made for standard quick release and is compatible Center Lock brake rotors.Key Features:Powerful, reliable disc brakes for added confidence and control.,24 spokes front and rear for optimized brake torque distribution.,Disc-brake optimized rim profile.,Disc-friendly spoke geometry and lacing pattern.,Smooth, efficient ride quality.,Wider 17mm (inner width) rims allow tires up to 32mm.,High quality QRM cartridge bearings.,Straight pull round spokes are stronger than J-bend options..CompatibilityFront axle: 12x100 thru axle, easily convertible to quick release with included adapters. Not compatible with 15mm through axles.Rear axle: 12mm thru axle, convertible to Quick Release with included adaptersFreewheel: Shimano/Sram, convertible to Campagnolo and XD-R with optional driver bodiesHubsFront: Quick release and 12x100 through axle compatibleAuto adjust sealed cartridge bearings (QRM Auto), front and rearRear: Quick Release, 12x142 and 12x135 compatibleFreewheel: Instant Drive 360Front and rear bodies: aluminumAxle material: aluminumCompatible Adapters and freewheel bodiesID360 Shimano / Sram freewheel body (LV3430100 - Delivered on the wheel)ID360 XD-R freewheel body (LV2580100)ID360 Campagnolo freewheel body (LV3440100)ID360 Shimano / Sram Light freewheel body (LV3850100)12x135 rear axle adapters (LV2510900)12 to 9mm rear adapter for quick release (LV2510800 - Delivered with the wheel)12x142 rear axle adapters (LV2510700 - Delivered with the wheel)12mm front hub cap (LV2680500 - Delivered with the wheel)12 to 9mm front adapter for quick release (LV2680300 - Delivered with the wheel)Intended UseMax. Pressure: see indication on wheel and tyre. If they differ, use the lowest of the 2For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 2 : road and offroad with jumps less than 15cmRecommended tyre sizes: 25 to 32 mmVersionsDisc standard : 6 Bolts or Center Lock(R)Color: Black only
Shimano SLX M7120 Rear Hydraulic Disc BrakeWith the Shimano SLX M7120 Rear Hydraulic Disc Brake on your mountain bike (MTB), you'll dominate every off-road adventure. Its four-piston caliper provides extra stopping power to bring you superb modulation and control on the trails.The stunning Shimano SLX M7120 brake includes a four-piston caliper and a rider tuneable lever for phenomenal stopping power as you navigate around the mountain. Its caliper decreases rotor wobbling noise and increases its braking power by 10%, so you'll enjoy a quieter and more precise braking set-up. Its lever features an action-packed cockpit layout for more flexibility and an adjustable reach that suits any hand size, type of riding and your individual preferences.Features: Material: Lever: Aluminium anodised; Caliper: Aluminium painted Brake Type: Hydraulic disc brake Brake Fluid Type: Mineral oil Hose Length: Separate 1700mm or 200mmm options Single or Pair: Single Use: Mountain Bike (MTB) Caliper Mount: Post Mount (mounting bolts included) Lever Length: 2 finger Adjustment: Tool-less reach adjustment Piston: 4-piston Brake Pads Included: Yes; Brake Rotor Included: NoTechnologies:Servo Wave Action: When you pull a Servo Wave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control.Reach Adjust: Brake lever is equipped with a reach adjust mechanism. The distance from the handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.Ice Technologies: The fade, which can occur to disc brake rotors and pads when braking on a long downhill ride, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realise the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400˚C to 300˚C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight.Four Piston: Disc brake system with the dual diameter opposed-piston caliper design has differently sized pistons in front and in the rear. The system adopts a power transfer system in which the disc brake rotor is pressed by the smaller sized piston at the entrance of the disc brake rotor intake and also by the more powerful larger sized piston at the back. This prevents the wobbling motion of the disc brake rotor and reduces noises significantly. The 4-piston caliper also allows a wider contact area for the disc brake rotor while keeping the size compact, and the efficient location of pads is adjusted as necessary to stabilise the pressure. In combination use with the Servo Wave lever, it provides an incredible 50% more stopping power than the previous model. The advanced Saint/Zee disc brake system, which adjusts to accommodate the different braking styles of different riders, offers stable braking power and excellent modulation.I-Spec EV: I-Spec EV creates a clean and action-optimised cockpit that provides greater focus and flexibility for a wider range of riders. Wider adjustment range allows riders of various styles, preferences and body styles to adjust to the optimal position. Ergonomic design, quicker lever access, and light operation enhance rider comfort and concentration.Click here to view the Shimano Brake Reference Guide.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.