Custom bearings and high performance seals in all e*thirteen bottom brackets deliver supreme durability and smooth spinning.
Miche Supertype Evo Max BB30 Bottom BracketThis top-notch bottom bracket is specifically designed for use with 24mm cranks for smooth rolling operation. Its high-quality aluminium press fit cups are compatible with BB30 frame standards, so you can enjoy increased stiffness and efficiency. Finally, it weighs only 134g, so you won't have to worry about adding any unnecessary weight to your ride.Features: Bracket Material: AL 7075-T6 Aluminium Cup Material: AL 7075-T6 Aluminium Bearings: SKF sealed Axle Diameter: 24mm Compatibility: 1,370x24tpi BB30, press fit Weight: 134gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink™ lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.Weight: 370g (direct mount, 800mm hose, 160mm CL rotor)Lever Material: Forged aluminumCaliper Design: 2-piston caliperFinish: Gloss BlackRotor: CenterLinePad: Steel-backed organicFluid: DOT 5.1Adjustment: Tooled reach adjustTechnology Highlights: DirectLink™, Expandable Bladder, Timing Port ClosureMaterial: AluminumPad / Holder: Top loadingIntended Use: XC, TrailSystem: Open systemRotor Sizes: 140 (rear), 160, 170, 180, 200mmTri-Align Caliper Positioning System: NoSpeed Dial: NoBend Zone™: YesAmbidextrous: YesStainless Hardware: Steel
Custom bearings and high performance seals in all e*thirteen bottom brackets deliver supreme durability and smooth spinning.
Key Features:13mm hardened MAX-Performance steel shackle resists bolt cutters and leverage attacks,New patent pending hardened double deadbolt design gives additional protection against twist attacks,High security disc-style cylinder is pick and drill resistant,Anti-rattle bumpers reduce noise during transport,New dust cover,Includes Transit FlexFrame-U transportation system which allows for versatile carrying,Protective vinyl coating,3 stainless steel keys – one lighted with high intensity LED bulb & replaceable battery,Key Safe Program,Rated 7/10 on Kryptonite's security scale,Optional ATPO - £ 1,500,Product dimensions: 3.25” x 9.5" (8.3cm x 24.1cm),Product weight: 3.15 lbs (1.43 kgs),Sold Secure Bicycle Gold certified.
Lightweight and RacyA sleek and stylish upgrade to the best mechanical caliper on the market. The BB7S stainless steel hardware and anodized finish make it right at home on any road-disc build..Compatible with Red, Force, Rival and Apex levers..Tech Spec : Weight : 197 grams, Caliper Only,Caliper Design : Mechanical, Forged 2-piece Aluminum,Finish : Black Anodized,Rotor : Centerline 140/160mm,Pad : Organic with Steel Backing Plates,Adjustment : Dual Knob Pad Adjustment, Tri-Align Caliper Positioning System,Intended Use : CX/TRK/URBAN/ROAD.Technologies : Tri-Align™ Caliper Positioning System™Another original Avid technology making your life better—there’s never been an easier brake to install and adjust. With Avid’s Tri-Align™Caliper Positioning System™, aligning the caliper to the rotor literally takes seconds. Just loosen the CPS™ bolts a little, and then squeeze the brake lever while re-tightening the bolts. Perfect caliper alignment—just like that.
Offering the highest level of security in the Abus range, the Granit X-Plus 540 Lock offers the best protection against theft for your bicycle.13 mm hardened square shaft parabolic shackleAbus power cell technology offers the highest level of protection against attempts to break open the lockThe shackle, housing and the structural parts of the locking mechanism are made of specially hardened steelAbus X-Plus cylinder for the highest level of protection against tampering, e.g. pickingUSH 540 universal bracket can be easily attached to round frames with a diameter of 15 - 35 mmMade from specially hardened steel, the Granit X-Plus 540 Lock is built to withstand almost any attempt to break it open, with power cell technology for protection against impact and attempts to force open the lock and Abus' X-Plus cylinder for the greatest protection against tampering. The Granit X-Plus 540 Lock combines the highest-quality materials with the latest technology for protection against theft! It is a first-class lock which protects your bicycle when the risk of theft is high.
Rather than relying on the pressfit shell for alignment, the UBB4630's threaded sleeve locks both cups in place, increasing BB shell stiffness. This also ensures a smooth, uniform spin free from creaks that often plague pressfit while preventing bearing overload. The perfect alignment also means longer bearing life while the sleeve also prevents cable guides rubbing against rotating parts. "The motive for the UBB4630 was to address challenges related to bottom bracket installation and durability with specific frames," said David Martinez, head of engineering at Rotor.
Rotor UBB4630 Steel Bottom Bracket"The motive for the UBB 4630 was to address challenges related to bottom bracket installation and durability with specific frames," said David Martinez, head of engineering at Rotor.The UBB 4630 Bottom Bracket uses a threaded sleeve that locks both cups in place, increasing the stiffness of the bottom bracket shell. It also eliminates one the most common and frustrating issues with pressfit bottom brackets, creaking, while ensuring free and smooth spinning cranks. As perfect alignment is achieved, you can expect longer bearing life and the sleeve prevents cables and guides rubbing against moving parts.Features: Material: 7000 series Aluminium Threaded installation Weight: 109gBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Record Pista groupset is a collection of hi-tech components designed purposely to excel in velodromesAxle Length 111 mm (asymmetrical),Composite and light alloy cartridge,Light alloy cups - without sealings,Weight 220g.
The new, advanced non-contact labirynth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud. Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting.