When you're taking on tougher mountain bike terrain, the Rockfight CE Chest Protector offers the burly and tough body protection you need to ride with confidence, knowing you're well protected should you crash. The superb protection starts with Troy Lee's Helmet Technology Inside. This sees key impact zones across both the chest and spine protected with advanced EPP, offering safe protection from slow-speed impacts. Meanwhile, the front plate is also stone shield certified to CE EN14021. This keeps you protected from roost and debris that can be kicked by knobbly tyres. On top of this, you also benefit from a D3O back insert. This flexible protector exceeds CE EN1621 Level 1 for impact absorption making sure that should you fall hard on your back you enjoy extra safety and protection. In normal use the D3O is flexible. But upon impact, it's unique engineering sees it stiffen to absorb damaging forces. Flexible plates to the sides wrap your core and hold the protector in place. And adjustable shoulder straps, with 4 inches of adjustment, let you dial in the fit perfectly. The protector is also compatible with neck braces, giving the perfect set up for the gnarliest of trails. While offering superb protection, you'll also be happy to find comfort is in no way compromised. Troy Lee have kept the overall weight low and airflow high. The low weight and form fit lessen the burden on the body, fending off early fatigue, while also allowing for a smooth fit under your MTB jersey. And to boost airflow, the protected plates are well vented, with engineered channelled bio-foam on the inside to allow increased laminar airflow keeping you cool and fresh.
The Chest Protector 3.5 combines hard shell armour and 3DF AirFit ventilated soft impact foam to deliver CE certified level 1 protection to the chest and back and also achieves both FIM and FFM certification. With the BraceOn™ neck brace fitting system it's also perfectly compatible with Leatt's neck braces and you can run over or under your MTB/MX jersey, depending on your preference. Thanks to a 3D design, adjustable waist straps and padded base layer, the Chest Protector 3.5 fits brilliantly. Comfort is further enhanced thanks to the targetted venting, keeping air flowing to the body to evaporate sweat.
Using CE Certified D3O® Viper™ across the back and D3O® shoulder inserts, the Baseframe Pro Short Sleeved Body Protector offers incredible levels of mountain-bike ready protection but without the drawbacks of less flexible, heavier systems. The D3O® polymer is remarkably flexible in use, softening with body heat, allowing you to move and position yourself on your bike with ease. The back insert also features flex-grooves to further enhance flexibility. However, in the event of a fall and impact on the ground, the D3O® pads stiffen in order to absorb hits that would otherwise leave you battered and bruised. When you're on the trail you'll soon be warming up and generating a sweat. But thanks to the use of moisture-wicking, open stretch mesh, moisture can easily evaporate away to leave you cool and dry. Perforations in the pads also ensure easier air circulation and breathability. When you're charging down technical trails, you can be sure you'll enjoy excellent protection should you get your line or landing wrong.
CE certified and ready to rule the roost, the Body vest 3DF AirFit is a must for riders who want to bulk up on their MTB protection. It brags a total of 11 points on the Leatt scoring system and offers a better range of all-round protection than the body vest counterpart. Fitting easily underneath your favourite jersey, the impossibly comfy armour has an elastic strap to secure its fitting when riding over rough terrain. Utilising the excellent 3DF AirFit impact foam construction unexpected falls from the bike need not pose a risk to your session and the multi-layered design is perforated to improve ventilation and flexibility. For those that ride aggressively, this breathable vest is certain to inspire confidence. Key Technology: Total Leatt® protection score of 11 points 3DF AirFit ventilated soft impact foam CE tested and certified as impact protection Chest prEN1621-3 Level 2 Back EN1621-2 Level 2
Meeting stringent European standards, the Leatt Junior Body Protector 3DF AirFit Lite is one for the MTB aficionados, a flexible form of body armour ready and waiting to keep young shredders safe on the trail. Offering lightweight coverage to the chest, back, elbows and shoulders, the armour protects your body by hardening upon impact with outside agents. Registering an impressive 18 points on the brand’s protection system, the Junior Body Protector 3DF AirFit Lite provides a perfect fit to your torso and has a sandwich-type lay-up that allows for added movement between the layers. Permitting impressive bending capabilities, comfort is inspired while the protector is also compatible with a neck brace. Other key technology: CE tested and certified as impact protection: Chest: prEN1621-3 Level 1; Back: EN1621-2 Level 1; Shoulder: EN1621-1 FFM-French Federation certified Total Leatt® protection score of 18 points Multi-layer, perforated back and chest protectors Lighter, more comfortable and flexible Extra upper-chest impact protection layer for non-neck brace users
The Junior Body Protector 3.5 provides impact protection across the chest, back, elbows and shoulders. Using a combination of Hardshell protectors and 3DF AirFit ventilated soft impact foam, these protection zones are CE tested and certified to their respective level-1 standards. In the event of a crash, this will reduce the harmful impact forces of the body meeting dirt. And all being well, your hard-charging young rider will be able to hop back up and keep riding, with nothing but perhaps a slightly bruised ego. Young dirt riders, whether mountain bike or motocross, will also reap the benefits of Leatt's BraceOn™ system. This makes the 3.5 fully compatible with Leatt's neck braces, ideal for more demanding trails and tracks. While protective, the 3.5 is also comfortable to wear. The 3D design and zip-up compression base layer combine to give a comfortably snug fit and this works well under MX or MTB riding jerseys. The zip-up design makes it easier to pull the protector on and off while the mesh material optimises airflow and breathability. It's anti-odour too, keeping things fresh even after the sweatiest of biking sessions.
The 4.5 Neck Brace is engineered to channel crash forces from your helmet to your body, thus isolating your neck from, and reducing, the forces that could otherwise cause neck injuries. It also has a collarbone cut-out to prevent your helmet from impacting your most fragile and vulnerable bones. Leatt's CoreFlex split rear folding thoracic strut gives a perfect fit, allowing optimal freedom of movement but will break away to protect your back from unwanted pressure. The fit is also easily customisable via the two-way adjustability at the rear while the split front dials in more comfort. Easy-to-clean foam padding also gives you extra comfort. Lab and Rider Tested The 4.5 Neck Brace system has undergone independent lab testing and has been used at the highest level of mountain bike competition. In both cases, it has proven itself to be vital in reducing injury during a crash. This is achieved by transferring the load during an accident away from the fragile bones in the neck. • Up to 89% reduction in critical cervical spine injuries* • Collarbone injuries up to 45% MORE likely WITHOUT a neck brace* § *Independent Moto motorcycle study by Action Sports EMS
Built from the renowned VPD (Visco-Elastic Polymer Dough) to deliver extreme impact protection. Highly impact absorbent whilst being comfortable as the material adapts to your body to create an individual fit, the VPD transitions from soft to hard during impact vastly reducing the energy transferred to the rider. Unlike other materials the VPD material retains the same high absorption level after repeated impacts, thus ensuring it's effectiveness for many rides to come. The ventilated design maintains airflow and breathability to help keep you as comfortable as possible. Fully adjustable with waist and shoulder straps, which have different attachment points to allow the POC VPD System Back to fit almost any user.
Ergonomically designed to work with your muscles, the Trigger Upper Body protection certainly fires on all cylinders when it comes to protection. It meets stringent cycling standards for safety and the XMatterTM padding ensures that your entire upper body is kept safe no matter how you ride. A leading light for offroad armour, the Trigger is extremely breathable, lightweight and the impressive ventilation works to maintain your focus and avoid the build-up of perspiration. A compression fit, the jersey retains energy in the muscles to keep you in the saddle for longer while the ability to continuously explode into berms and kickers will keep the thrill seeker in you happy throughout. For those obsessed with comfort, the Xmatter padding makes each and every adventure better than the last. It works to keep you protected from unexpected falls from the bike and works in tandem with the FlexZip stretchable zip, a feature that allows for a quick and customised fitting that gets you on the trail quicker. Ready, aim, fire! Shoot yourself downhill and through technical sections full of confidence thanks to your new Trigger Upper Body protection.
With its high-performance protection and three-way adjustability for that all-important customised fit, the DBX 5.5 Neck Brace deploys technology to direct crash forces from your helmet all the way to your body, bypassing your neck. Also using a collarbone cut-out on the brace to keep your helmet away from fragile bones, the rear thoracic strut has a dual plate design ready to snap off before applying pressure to the back. CE tested and certified for personal protective equipment, the neck brace has a low profile push-button open and closure system. Improving comfort and fit, this breathable body armour is perfect for installing confidence in any ride. Added features: Engineered collarbone cut-out to help keep your helmet and brace away from your most fragile bones Injected, durable and easy-to-clean foam padding Air flow ribbed body padding for optimum ventilation Folding rear thoracic strut for easier packing Free, optional, clear chest strap included CE tested and certified as Personal Protective Equipment 89/686/EEC Engineered and lab proven by a medical doctor and biomedical engineers Trusted by some of the fastest downhill racers in the world Unisex fit Weight: from 790g
With its highly impact-resistant padding, the Spine VPD 2.0 Vest outperforms EN 1621-2 Level 2 motorcycle back protection standard, ensuring that in the event of a crash your back benefits from the best degree of protection possible. Not only is it highly protective the padding also conforms to the shape of your body for an impressive level of comfort. When you're hitting downhill trails hard you'll build up a sweat and so POC house the protection in a breathable mesh vest, keeping airflow optimised and sweat off the skin. Once you're done riding, then the padding is easily removed to make it easy to keep your vest clean and laundered for the next day on the hill.
There are thrills to be had when you're riding on the limit, pushing your skills, concentration and equipment to the edge. But when you step over the limit and you get caught up in a crash the Baseframe Pro D3O Vest brings you a high degree of flexible protection across the chest and back. The chest gets treated to CE EN1621-1 level protection via D3O® armour while the back insert, also using D3O®, is rated to CE EN1621-2 level 2. When you're on the bike and shredding the D3O® is soft and flexible, allowing unhindered movement. However, in the event of a crash and ground impacts, the armour stiffens to absorb harmful forces upon the body. With all this protection you may think you'll feel restricted. But not a bit of it. The armour conforms to your body, leaving you fully mobile as you whip tabletops and navigate steep rocky trails. The form-fitting body is also quick-wicking and breathable, giving comfort during even the rowdiest of rides. Open mesh zones also add extra ventilation to keep you cooler while spacer mesh under both the chest and back guards provides comfort and extra moisture control. All the armour is removable too, letting you wash your vest and keep everything fresh and clean for your next shred session.