The RRP ProGuard Hook & Loop straps to quickly attach and remove Proguard V2. Pack includes 8 hook & loop straps.
Set the correct gap for any hydraulic brake caliper with the Lifeline Pro Disc Brake Caliper Alignment Tool. Easy to use and prevents brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor.Follow the simple steps below:Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side.Insert the Caliper Alignment Tool between the pads and the rotor.Pull the brake lever- forcing the pads against the alignment tool and in turn against the rotorWhile still holding on to the brake lever, tighten the bolts on the brake caliper.Release the brake lever and remove the tool and your pads should now be cantered to the rotor with an equal distance either side.Weight: 33gSize: 15cm x 3.5cmBlade length: 13cm
Capgo have developed an easy to install noise reducing 'sleeve' that simply slides over cable housings to reduce noise from internal cables/hoses moving in a frame. Protects shift housing, routed inside a bike frame, from noise and rattlingSuperlightEasy and quick assembly, resistant against brake fluidSuitable for all bike stylesOL level productLength - 2mShift: ID - 4.5mm, OD - 9mm
BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. It offers clear advantages over other products which aim to provide invisible protection for bike frames thanks a number of clever design features. Ultra-tough protection for bicycle chainstays, seatstays and cable rub areasEasy to apply or remove by hand and leaves no sticky residueInvisible on the bikeLong lasting and will not yellow with ageIncludes one stay shield (25 x 3.8cm) and two cable shields (2 x 3cm)On the bike it is invisible and you can simply peel it off and your bike looks like new! This Cable & Stay Shield Frame Protection is perfect for chainstays, seatstays and areas where gear or brake cables may rub on the frame, protecting them from potential damage. The shield is ultra-tough, will not yellow with age and is long-lasting, giving your bike years of worry free protection. The shield is easy to apply or remove by hand and once removed, leaves no sticky residue on the bike. If you want to protect your bike from numerous types of damage, BikeShield have got you covered.
BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. It offers clear advantages over other products which aim to provide invisible protection for bike frames thanks a number of clever design features. Ultra-tough protection for bicycle chainstays, seatstays and cable rub areasEasy to apply or remove by hand and leaves no sticky residueInvisible on the bikeLong lasting and will not yellow with ageIncludes one stay shield (25 x 3.8cm) and two cable shields (2 x 3cm)On the bike it is invisible and you can simply peel it off and your bike looks like new! This Cable & Stay Shield Frame Protection is perfect for chainstays, seatstays and areas where gear or brake cables may rub on the frame, protecting them from potential damage. The shield is ultra-tough, will not yellow with age and is long-lasting, giving your bike years of worry free protection. The shield is easy to apply or remove by hand and once removed, leaves no sticky residue on the bike. If you want to protect your bike from numerous types of damage, BikeShield have got you covered.
Capgo have developed an easy to install noise reducing 'sleeve' that simply slides over cable housings to reduce noise from internal cables/hoses moving in a frame. Protects shift housing, routed inside a bike frame, from noise and rattlingSuperlightEasy and quick assembly, resistant against brake fluidSuitable for all bike stylesSpec: OL level productLength - 2mBrake: ID - 5.5mm, OD - 11mm
Nukeproof Generator Front Bearing KitGenuine Nukeproof replacement parts.Features: Generator Front Bearing KitBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The patented Spokey Pro has a double-layered metal insert that doubles the surface contact between tool and nipple.This allows you to perform a larger number of turns with less pressure.Especially well-suited for professional use, high torque, and sensitive aluminium nipples.Double insert grips spoke nipple on all sides and prevents damage of nipple edges..
Key Features:Protects your chainstay, dropout and derailleur protection when you travel.Adjustable to fit multiple axle sizes (130, 135, 160 and 165mm)..
Chain stay protector for keeping your bike's paint finish shiny and fresh, and reducing the annoying noise of the chain bouncing.Key FeaturesColour: Black,Material: Neoprene.
Simply spray the Rain Shield Re-Proofer on a garment and you'll enjoy restored factory-level waterproof performance within 24 hours of application. The waterproofing technology reduces surface tension, letting water bead and roll off the surface. You'll also find it protects against mud and ground-in stains. And not only that, but it won't compromise the breathability of your garment either. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. How To: 1. Shake the bottle well before use to activate the formula. 2. Spray all over a clean, damp garment from 10-15cm away until the garment is fully treated. (Recommended using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). Muc-Off recommends spraying in a well-ventilated, dry area. 3. Remove any excess treatment with a clean cloth. 4. Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. 5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with a re-proofer. Best applied to a clean, damp garment for optimum results.
The Castelli Pro Thermal Headband provides protection just where it’s needed. Worn by the pros on high intensity rides and during races the headband protects the forehead and ears while allowing maximum ventilation, striking the perfect balance between staying warm and not overheating.Made from thermoflex fabric the headband provides warmth, softness, and is high wicking to keep comfort levels high. Flat-lock stitching and a raw-cut edge minimises any bunching under the helmet. Key Features: Thermoflex fabric is warm, soft and stretchy, Flat-lock stitching for comfort, Contoured to cover ears, Raw-cut edge lies flat and doesn’t bunch under helmet, Reflective detailing on back.