Designed to be simple to use, this fantastic model allows you to quickly press the seal into your freehubs. This means you can spend less time searching around your workshop for screwdrivers and coins by instead using this reliable component to get the job done.
Over time contaminants build up on your pads and rotors that reduce the friction between them. This can happen quite quickly to the point you notice straight away or more likely it happens over time and you don’t notice it much as the incremental difference on each ride is less. Regardless, you are either having to pull harder on the brake lever to achieve the same stopping power or you are braking earlier and for longer to slow down in time for your next obstacle – neither of which is an ideal situation! A quick blast of Brake Juice will restore sharpness to your brakes in no time, meaning later, harder braking for the same finger effort (which can in turn reduce arm pump) and quicker times. Brake Juice has a chlorine-free formulation that will not do any of the following: Contaminate the pads and reduce their friction with the discs. Cause that incredibly annoying ongoing squeaky brake syndrome Harm the plastic, rubber or paintwork on your bike. Leave a residue Directions: Spray directly on to callipers, pads and rotors and let it do it’s thing. Brake Juice dries quickly, with no residue so there is no need to wipe anything off. Initial performance does differ between pad compounds and different brands. Generally we have found that the Brake Juice evaporates more quickly from semi metallic and sintered pads than it does from organic pads. So if you do use organic pads you may experience a short period of brake squeak but this will quickly stop.
The aluminium backing plate reduces weight by almost 50% compared to the equivalent steel backing plate making these perfect for XC and road use.
Directions for use: Step 1 - Thoroughly rinse drive chain area before application. Step 2 - Apply Bio Chain Cleaner to drive chain area. Agitate grime with a brush or sponge. Step 3 - Rinse entire drive chain area with fresh, clean water.
The RearGuard - OFF-ROAD is designed for use off-road on either a mountain bike or CX bike, it's a fast-fitting mudguard for those last-minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back. The 3 new creases add stability and strength and the additional length adds protection over rough terrain.
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Off-Road Mudguard The RearGuard Off-Road is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 20 seconds and stays put!The RearGuard is designed for use off road on either a mountain bike or CX bike, it's a fast fitting mudguard for those last minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back The 3 new creases add stability and strength and the additional length adds protection over rough terrain Features: Quick and easy to fit Offers protection from mud and spray Velcro fastener ensures a secure fit Weight: 41gNot recommended for use with dropper seat posts.Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Road Mudguard The RearGuard ROAD is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 10 seconds and stays put!Features: Quick and easy to fit Offers protection from road spray Velcro fastener ensures a secure fitBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 3 Front Bearing Support Bush (pair)This stunning pair of support components is specifically engineered for use with Hope Pro 3 front hubs. Designed for ease of use, these fantastic models are perfect for home mechanics for helping with the removal and insertion of your hubs. Strong and dependable, these weigh in at only 162g (approx) making them a perfect new addition to your workshop for fast and straightforward maintenance. Features: Use: MTB Compatibility: Hope Pro 3 front hubs Part Number: HTT181 Weight: 162g (approx)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.